| | Matrix-508 Linux SBC You are here: The Debug Store > Boards > Boards - Controller > ARM > Artila > Matrix-508 Linux SBC | 100% Linux Compatible , Hassle Free
The Matrix-508 is a true Linux computing platform and it supports versatile file systems. Users can operate the Matrix-508 the same way as they do on a normal Linux desktop.
Support Wire and Wireless Networking
The Matrix-508 comes one standard 10/100Mbps Ethernet port for wired networking. Besides, it is easy to add IEEE-802.11b/g WiFi support by simply plugging an USB WiFi dongle into the Matrix-500.
Four High Speed TTYs (Serial Interface)
Also, the Matrix-500 provides four 921.6Kbps high-speed TTY ports for communication with RS-232/422/485 devices. Port 1 can be configured as RS-232, RS-422 or RS-485. Port 2 features full RS-232 supporting for modem connection. Port 3 and Port 4 support standard RS-232s.
Optional 2GB SD Card for Data Storage
Users can install one standard SD Flash memory card, up to 2GB now, into the Matrix-500 as an additional hard drive. This means the Matrix-500 can hold huge amount of data or web pages, which is a must-have feature needed for Web-base remote monitoring and control.
GNU Tool Chain for Application Development
Open-source GNU Tool Chain, including C/C++ cross-compiler and POSIX standard C/C++ library, is bundled with the Matrix-500 for free. |
| * Atmel AT91RM9200 CPU, 200MIPS @180MHz
* 64MB SDRAM, 32MB NOR FLASH memory
* 512KB non-volatile SRAM(M-508T only)
* -20 to 80C wide-temperature operation(M-508T only)
* One 10/100 Mbps Ethernet interface
* Two USB 2.0 Host ports
* One SD (secure digital) interface
* Four 921.6Kbps RS-232/485 ports
* GPIO: 32x pins, CMOS-level
* Small footprint, 105x75mm only
* Single 5V power input
* Ultra low power consumption, less than 3 Watts
* Linux 2.6.x OS is pre-built, supports file system
* GNU C/C++ tool chain is included |
| CPU/Memory
* CPU: ATMEL 180MHz AT91RM9200 (ARM9, w/MMU)
* Memory: 64MB SDRAM, 16MB Flash
Network Interface
* Type: 10/100BaseT, RJ-45 connector
* Protection: 1.5KV magnetic isolation
TTY (Serial) Ports
* Port 1: can be set as RS-232, RS-422, or RS-485
* Port 2,3,4: RS-232
* Connector: RJ45 connector
TTY (Serial) Port Parameters
* Baud Rate: up to 921.6 Kbps
* Parity: None, Even, Odd, Mark, Space
* Data Bits: 5,6,7,8
* Stop Bit: 1, 1.5, 2 bits
* Flow Control: RTS/CTS, XON/XOFF, None
USB Host Ports
* No. of ports: two
* Speed: USB 2.0 compliant, supports low-speed (1.5Mbps) and full- speed (12Mbps) data rate
Mass Storage
* One SD 1.0 compliant socket inside
General
* WatchDog Timer: yes, for kernel use
* Real Time Clock: yes
* Buzzer: yes
* Power input: 9~48VDC
* Power consumption: 300mA@12VDC
* Dimension: 78 x 108 x 24mm
* Operation Temperature: 0 to 70C(32 to 158F)
* Regulation: CE Class A, FCC Class A |
| General
* OS: Linux, kernel 2.6.x
* Boot Loader: U-Boot 1.1.2
* File Systems: JFFS2, ETX2/ETX3, VFAT/FAT, NFS
Protocol stacks
* IPv4, ICMP, ARP, DHCP, NTP, TCP, UDP, FTP, Telnet, HTTP, PPP, PPPoE, CHAP, PAP, SMTP, SNMP V1/V2, SSL, SSH 1.0/2.0
Utilities
* bash: shell command
* tinylogin: login and user manager utility
* telnet: Telnet client program
* busybox: Linux utility collection
* ftp: FTP client program
Daemon
* pppd: Dial In/out over serial port and PPPoE
* snmpd: SNMP agent program
* telnetd: Telnet server program
* inetd: TCP server program
* ftpd: FTP server program
* boa: Web server program
* sshd: secured shell server
* iptables: Firewall service manager
* armd: Artila manager daemon
Tool Chain for Linux
* GCC: C/C++ PC cross compiler
* GLIBC: POSIX Library
Device Drivers
* SD/MMC, UART, Real Time Clock, Buzzer, Digital I/O, Ethernet, Watchdog Timer
USB Host Drivers (could be customized)
* Flash disk, WiFi (IEEE-802.11b/g), and RS-232 adaptors
|
| - (1) Matrix-508 ARM9-based Linux Computer with 32MB on-board Flash
- CD-ROM which contains GNU tool chain and user guide |
|
You are here: The Debug Store > Boards > Boards - Controller > ARM > Artila > Matrix-508 Linux SBC |
 
|
