RK-System Vibration Analysers
You are here:
The Debug Store >
Test Equipment >
Vibration Analysers >
RK-System Vibration Analysers The RK-System Vibro-DAQ vibration analysers are designed to facilitate balancing of rotors in a single or dual plane. The two methods are described in ISO 1940/1-1986.
In-situ or Stand-BalancingThe Vibro-DAQ is able to balance rotors in situ, such as on a grinding wheel or vehicle transmission system. In some cases such as balancing a motor armature, it would be usual to setup a balancing stand.
Synchronous or Asynchronous Spectrum AnalysisBoth methods are suport. Synchronous analysis requires a laser position sensor. |
Click on Image for more details |
 - Provides dynamic single and two plane balancing of rigid rotors.
- Balancing can take place in situ or on a balancing stand.
- Unit features two independent measurement-channels.
- Rotational speed range from 0.1rps to 10,000rps.
- Will work with a range of vibration sensors such as acceleration, velocity and displacement based.
|  - Provides dynamic single and two plane balancing of rigid rotors.
- Balancing can take place in situ or on a balancing stand.
- Unit features two independent measurement-channels.
- Rotational speed range from 0.1rps to 10,000rps.
- Will work with a range of vibration sensors such as acceleration, velocity and displacement based.
- Also measures temperature in sensor location.
|
