');');');');
The Debug Store
 
UK Tel: 0800 808 7456

TC2050-IDC-NL-430 TAG Connect Push-On Programmer Cable

You are here: The Debug Store > Test Equipment > Test Cables > Tag Connect Plug-Of-Nails™ Cables > Push-On TAG Connect Cables > TC2050-IDC-NL-430 TAG Connect Push-On Programmer Cable

TC2050-IDC-NL-430 TAG Connect 10 Way Push-On Programmer Cable for TI MSP-FET430

TC2050-IDC-NL-430 TAG Connect 10 Way Push-On Programmer Cable for TI MSP-FET430zoom inside main image



Availability:
In Stock

Quantity: 



Ask a Question?
Brochure
Data Sheet
 Part #: TC2050-IDC-NL-430
Price:£38.50 / €47.36 (Excluding VAT at 20%)
Manufacturer: Tag Connect
Warranty: 6 Months



Tag-Connect’s TC2050-IDC-430-NL cable (152mm long) is a special version of the TC2050-IDC-NL "Plug-of-Nails" cable designed to be plugged directly into TI’s MSP-FET430 and is compatible with all MSP430 MCU’s. The cable is fitted with a spring-pin Tag-Connector that conveniently plugs directly into your PCB and terminates in a 14-pin 0.1" ribbon connector that plugs directly into the FET430.

Tag-Connect cables provide a simple, reliable means of connecting Debuggers and Programmers or other test equipment to your PCB’s while lowering board costs and facilitating efficient production programming.

Tag-Connect uses a specially designed (Patent Pending) connector which eliminates the need for putting a programming header or other mating connector on every PCB. Instead, Tag-Connect uses tried and tested spring-pins rated for over 100,000 operations to make a secure connection to a special footprint pattern of pads and locating holes in your PCB.

The legged “No Legs” footprint takes about the same board space as a couple of SMT resistors which means you can locate the footprint right next to the MCU if desired. If required, use the TC2050-CLIP board to secure the TC2050-IDC-430-NL connector to the PCB.

The "No Legs" Tag-Connector is also compatible with the "Legged" footprint, meaning you can conveniently debug with the self-retaining TC2050-IDC-430 and use TC2050-IDC-430 for a quick hand-held programming operation as may be typical during production.

This 10-conductor cable has a TC2050 Tag-Connector on one end and a standard 14-pin ribbon connector on the other and is wired specifically for the TI MSP-FET430 debugger (and compatible MSP430 debuggers). It is compatible with all MSP430 MCU’s.

If your MSP430 device supports SPY-BI-WIRE, also take a look at the SPY-BI-TAG adaptor with the even smaller footprint (0.02 square inches) TC2030-MCP-NL 6-pin cables. This is the perfect solution where board space is premium!

People who bought this item also bought:

1. TC2050-IDC TAG Connect 10 Way Plug-In Programmer Cable (Ref: TC2050-IDC)
Price:£38.50 / €47.36 (Excluding VAT at 20%)
2. TC2030-MCP-NL-6 TAG Connect 6 Way Push-On Programmer Cable, 152mm long (Ref: TC2030-MCP-NL-6)
Price:£34.50 / €42.44 (Excluding VAT at 20%)
3. Tag Connect TI FET430 to RJ12 SPY-BI-WIRE Adapter (Ref: SPI-BI-TAG)
Price:£34.50 / €42.44 (Excluding VAT at 20%)

You are here: The Debug Store > Test Equipment > Test Cables > Tag Connect Plug-Of-Nails™ Cables > Push-On TAG Connect Cables > TC2050-IDC-NL-430 TAG Connect Push-On Programmer Cable


Free Shipping at The Debug Store




SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

Items:, Value:



Company

HomeAbout UsThe Debug Store BlogThe Debug Store CommunitySitemapWho Likes Us?Contact UsNews

Information

Email NewsletterTechnical Articles

Shipping

Shipping Information

Payment

Payment Options