| | TRP-C08 You are here: The Debug Store > Automation > Automation Interfaces > USB > Trycom > TRP-C08 | * Full compliance with the USB V1.0 and 2.0 specification
* System gets 1 COM port when the converter is connected
* Auto data format detecting
* Auto direction flow control on RS-485
* Auto baud rate switching from 75bps to 1228800bps
* 256 byte buffer for upstream and downstream data flow
* Direct power from USB port , no external power necessary
* 3000V DC isolated protection
* Surge protection on RS422/485 data lines
* Power/TX/RX mode LED indicator
* DIN rail or panel mount support
* Driver support: Windows 98/ME/2000/XP/CE3.0, and Linux, and Mac OS |
| * USB interface: Fully compliant with V1.0, 2.0 specification
* USB to serial bridge controller; Prolific PL2303HX
* RS-232 signal: 5 full-duplex (TXD, RXD, CTS, RTS, GND)
* RS-422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-)
* RS-485 signal: Differential 2 half-duplex wires (D+, D-).
* Data Format: Asynchronous data with all common combination of bits, parity, stop
* Parity type: None, odd, even mark, space
* Data bit: 5, 6, 7, 8 or 16
* Stop bits: 1, 1.5, 2
* Cable: USB type A to type B
* Communication speed: 75~256KBbps
* RS-422/485 line protection: Against surge, short circuit, and voltage peak
* Transmission distance: RS-422/485 Up to 4000ft (1200m)
* Connection type: Screw terminal accepts AWG #12~30 wires
* Signal LED: Power on, TX, RX
* Direct power from USB port
* Power consumption: 1.2W
* Isolation voltage: 3000V DC.
* Operating environment: -10 to 50 deg C
* Storage temperature: -20 to 70 deg C
* Humidity: 10-90% Non-condensing.
* Dimension: 151mm X 75mm X 26mm .
* Weight: 375g |
|
You are here: The Debug Store > Automation > Automation Interfaces > USB > Trycom > TRP-C08 |
 
|
