TRP-C08S USB 2.0 to 1xRS-232C and 1xRS-422/485 Opto-Isolated Converter

* USB-2.0 Device Controller
* Allow user custom adjust baud-rates
* Each Port can impendent set up the baud-rate and data format
* OS. system get dual port UART serial (1*RS232 and 1*RS422/485)
* On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port
* Fully PLC support such as Mitsubishi Q,FX and FATEK serial etc.
* Auto direction flow control on RS-485
* Auto baud rate switching from 75bps to 921.6 Kbps
* 256 byte buffer for upstream and downstream data flow
* Direct power from USB port , no external power necessary
* 3000V DC isolated protection
* Surge protection on RS422/485 data lines
* Power and TXA/RXA/TXB/RXB communication LED indicator
* DIN rail or panel mount support
* Driver support: Vista64/32,Windows 98/ME/2000/XP/CE3.0, and Linux, and Mac OS

* Input: USB 2.0.
* Output: RS232 signal: Standard 9-pin DTE full-duplex.
* RS422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-)
* RS-485 signal: Differential 2 half-duplex wires (D+, D-).
* Optical Isolation:RS422/485 3KV.
* Data Format: Asynchronous data with any combination of bits, parity, stop
* Parity type: None, odd, even mark, space.
* Data bit: 5, 6, 7, 8
* Stop bits: 1, 1.5, 2.
* Flow Control: Xon/Xoff, Hardware, None
* Cable: USB 2.0 type A to type B cable.
* Communication speed:75~256Kbps.
* RS422/485 line protection: Against surge, short circuit,+/- 15KV ESD and voltage peak.
* RS232 line protection: +/- 15KV ESD.
* Distance: RS422/485 Up to 4000ft (1250M).
* Connection type: Screw terminal for maximum AWG #12~30 wire.
* Din-Rail mountable: Option.
* Power consumption:130mA by USB power.
* RS422/485 Optical Isolation: 3000V DC.
* Operating environment: -10 to 50° C
* Storage temperature: -20 to 65° C
* Dimension: 151mm X 111mm X 26mm.
* Weight: 375g.
* Humidity: 10-90% non-condensing