TRP-C26
You are here: The Debug Store > Automation > Automation Interfaces > ModBus > Trycom > TRP-C26
|
* Wide input range DC power supply
* Support ASCII and Modbus RTU protocol
* Supports baud rates from 1.2Kbps to 115.2 Kbps
* All 16 channels digital input ca be used as counter
* Digital output signal with 3750Vrms isolation protection
* Dual watchdog: Module’s firmware, host computer traffic
* LED for each channels working status
* DIN rail and panel mount support
* Configured and self-test by outer dip-switch
* Support screw terminal and external DC power adaptor |
|
* Power Input Voltage: DC +10V to +30V
* Protocol: ASCII and Modbus RTU
* Input channel: 16 digital input channels with counter
* Input digital input counter: 0~65535
* Input optical isolation: 3750 Vrms
* Input logical level 0 +1V (max)
* Input logical level 1 +4.0V ~ +30V
* Communication interface: RS-485.differential 2 half.duples wires
* Communication speed: Baud rate from 1200bps to 115.2Kbps
* Data format: Data bit: 8, Parity Check: None, Stop Bit: 1
* Input impedance: 3Kohm
* Inputs can be use as counter channel: 16
* Counter frequency: 100 Hz
* Dual watchdog Hardware reset circuit, module and host operating status
* Signal LED: Power on, all input channels
* Power supply: Screw terminal, or standard external DC adapter
* Power consumption: 1.5W (max)
* Operating environment: -10 to 50 deg C
* Storage temperature: -20 to 70 deg C
* Humidity: 10-90% non-condensing
* Dimension: 151mm X 75mm X 26mm
* Weight: 395g |
|
You are here: The Debug Store > Automation > Automation Interfaces > ModBus > Trycom > TRP-C26
