TRP-C29U
You are here: The Debug Store > Automation > Automation Interfaces > ModBus > Trycom > TRP-C29U
|
* Powered from USB port
* System get a seriall com port when USB plug in
* Support ASCII and Modbus RTU protocol
* Supports baud rates from 1.2Kbps to 115.2 Kbps
* All 8 channels digital input ca be used as counter
* Digital input signal with 3750Vrms isolation protection
* Dual watchdog: Module’s firmware, host computer traffic
* LED for each channels working status
* DIN rail and panel mount support
* Configured and self-test by outer dip-switch
* Support screw terminal |
|
* Built-in USB 2.0 to serial bridge
* Input channel: 8 digital input channels
* Input optical isolation: 3750 Vrms
* Input logical level 0 +/-1V (max)
* Input logical level 1 +/-4.0V ~ +/-30V
* Digital Input can be used as counter channel:8
* Input counter :Dec 0~65535(max) or Hex 0000~FFFF(max)
* Input impedance: 3Kohm
* Input Counter frequency: 100Hz
* Input distance: 500M (max)
* Output Maximum voltage: +/-30V
* Output Maximum current: 100 mA
* Digital output isolation: 3750Vrms
* Communication interface: USB
* Communication speed: Baud rate from 1.2kbps to 115.2Kbps
* Dual watchdog: Hardware reset circuit, module and host operating status
* Signal LED: Power on, all channels
* Power supply: Directly input from USB
* Connection type: Screw terminal, accepts AWG #12~32 wires
* Power consumption: 1.2W
* Operating environment: -10 to 50 deg C
* Storage temperature: -20 to 70 deg C
* Humidity: 10-90% Non-condensing
* Dimension: 151mm X 75mm X 26mm
* Weight: 400g |
|
You are here: The Debug Store > Automation > Automation Interfaces > ModBus > Trycom > TRP-C29U
