TRP-C68
You are here: The Debug Store > Automation > Automation Interfaces > ModBus > Trycom > TRP-C68
|
* Support ASCII and Modbus RTU protocol
* All channels can input analog signal by voltage or current
* Baud rate from 1.2Kbps to 115.2Kbps
* Surge protection on RS-485 interface
* LED display to indicate power and communication status
* Dual Watchdog for hardware reset circuit and host operating status
* External switch for hardware and module’s configuration
* Support screw terminal , or external DC power supply
* Wide input range DC power supply |
|
* Resolution :16 bit
* Sample rate: Normal mode: 10 sample / sec
Fast Mode: 60 sample / sec
* Bandwidth: Normal Mode: 15.72Hz
Fast Mode:/78.72Hz
* Zero drift: 0.03uV/C
* Span drift:25 ppm/C
* Accuracy: Normal 0.1 or better
Fast: 0.5 or better.
* Analog Input range: Voltage:±10V,±5V,±2.5V,±1.25V,±650mV
Current: +/-20mA
* CMRR: 92 db min/50/60Hz
* Analog input over voltage protection:+/- 35V
* RS-485 connector: Industrial plug-in screw terminal
* Communication Interface: RS485,2 wires
* LED indicator: Power and Communication
* Transmission distance : 4000ft (1200m)
* Speed: From 1.2K to 115.2Kbps
* Power consumption: 1.2 Watt
* Power requirement: DC input from +10 to 30 V
* Operating Temperature: -10 to 50 deg C
* Storage Temperature: -20 to 60 deg C
* Humidity: 10-90% non-condensing
* Dimension: 151mm X 75mm X 26mm
* Weight: 398g |
|
You are here: The Debug Store > Automation > Automation Interfaces > ModBus > Trycom > TRP-C68
