 |
Tag Connect In-Circuit Programming CablesThe Debug Store distributes Tag Connect In-Circuit Programming Cables in the UK and Europe. |
|
Tag-Connect LLC - The CompanyTag-Connect, LLC is a company headquartered just a few miles north of Silicon Valley, California and a few miles south of San Francisco.
Tag-Connect are a Microchip Premier 3rd Party Supplier and supply a range of an ingenious set of cables and adapters that allow programmable devices on a target board to be programmed without the expense of a plus or socket fitted to the board.
These are ideal for production programming and test applications. |
|
|
Click on Image for more details |
The Tag-Connect TC2030-CTX plug-in cable has a 6-pin TC2030 Tag-Connector and a 10-pin ribbon and ribbon connector that mates with the FTSH-105 style micro-headers.. |
The TC2030-IDC-6 cable is Plug-of-Nails cable is a 6-conductor cable (152mm long) fitted with a spring-pin Tag-Connector that conveniently plugs directly into your PCB and terminates in a 0.1" ribbon connector. |
The TC2030-IDC-10 cable is Plug-of-Nails cable is a 6-conductor cable (254mm long) fitted with a spring-pin Tag-Connector that conveniently plugs directly into your PCB and terminates in a 0.1" ribbon connector. |
The TC2030-MCP-6 cable is 152mm (6") long, as recommended by Microchip for PIC debugging applications. |
The TC2030-MCP-10 cable is 254mm (10") long, as recommended by Microchip for PIC debugging applications. |
Tag-Connect’s TC2050-IDC Plug-of-Nails cable is a 10-conductor cable (203mm long) fitted with a spring-pin Tag-Connector that conveniently plugs directly into your PCB and terminates in a 0.1" ribbon connector. |
Tag-Connect’s TC2050-IDC-430 cable (152mm long) is a special version of the TC2050-IDC Plug-of-Nails™ cable designed to be plugged directly into TI’s MSP-FET430 and is compatible with all TI MSP430 MCU’s. |
The TC2050-MINIHDMI is a 10-pin Plug of Nails Cable for use with Altium's cross platform USB JTag unit. |
|
|
Click on Image for more details |
The Tag-Connect TC2030-CTX-NL Push-On cable has a 6-pin TC2030 Tag-Connector and a 10-pin ribbon and ribbon connector that mates with the FTSH-105 style micro-headers. |
The TC2030-IDC-NL-6 cable is a non-locking Plug-of-Nails cable is a 6-conductor cable (152mm long) fitted with a spring-pin Tag-Connector that conveniently plugs directly into your PCB and terminates in a 0.1" ribbon connector. |
The TC2030-IDC-NL-10 cable is a non-locking Plug-of-Nails cable is a 6-conductor cable (254mm long) fitted with a spring-pin Tag-Connector that conveniently plugs directly into your PCB and terminates in a 0.1" ribbon connector. |
The TC2030-MCP-NL-6 cable is 152mm (6") long, as recommended by Microchip for PIC debugging applications. |
The TC2030-MCP-NL-10 cable is 254mm (10") long, as recommended by Microchip for PIC debugging applications. |
Tag-Connect’s TC2050-IDC-NL "No Legs" Plug-of-Nails™ cable (203mm long) is a 10-conductor cable fitted with a spring-pin Tag-Connector that plugs directly into your PCB and terminates in a 0.1" ribbon connector. |
Tag-Connect’s TC2050-IDC-430-NL cable (152mm long) is a special version of the TC2050-IDC-NL "Plug-of-Nails" cable designed to be plugged directly into TI’s MSP-FET430 and is compatible with all MSP430 MCU’s. |
|
Click on Image for more details |
The Tag Connect SPY-BI-TAG TC2030-MCP to SPY-BI-WIRE adaptor board allows use of the TC2030-MCP series with later versions of TI’s MSP430 MCU that support the SPY-BI-WIRE (2-Wire) JTAG interface. |
The Tag Connect TC2050-2X10 adapter board allows two TC2050-IDC 10-pin cables to be used in applications that would normally demand a single 20-pin ribbon connection. |
The Tag Connect TC2050-ARM2010 adapter board allows the TC2050-IDC cables to be used for ARM JTAG and ARM SWD (Single Wire Debug) applications. |
The Tag Connect TC2050-XILINX adapter has been designed to be plugged into the 2mm 14-pin header found on Xilinx’s platform. |
The Tag Connect TC-Renesas Adapter allows the TC2030-IDC or TC2050-IDC Plug-of-Nails cables to be used with Renesas E1 or E8a debuggers. |
|
Click on Image for more details |
This product is intended to temporarily hold a TC2030-MCP-NL cable in place on a PCB. |
Unpopulated board for evaluating the TC2030 TAG-Connect cable. |
Populated board for evaluating and testing the TC2030 Tag Connect cables. |
The Tag-Connect TC2050-CLIP is intended to temporarily hold a TC2050 Push-On cable in place on a PCB. |
The Tag-Connect TC2050-DEMO-BB is an unpopulated board for evaluating the TC2050 TAG-Connect cable. |
