Adapter Click Board
Adapter Click Board™ is a breakout board to add MikroBUS to IDC10 adapter to the user design. This accessory board is intended to easily connect IDC10 headers to the seventh generation development boards with MikroBUS sockets. It also has 2x5 connection pads that are compatible with MikroElektronika's IDC10 modules. Adapter Click Board™ features two ways of establishing connection: using male or female IDC10 connectors, or using IDC10 flat cable and soldering it either on the top, or the bottom side. However, in some cases, female header socket is a better choice, depending on user and design convenience. Adapter Click Board™ has two jumpers: one for SPI/I2C selection and another one for selection of power supply range. Adapter Click Board™ is designed to use a 3.3V or 5V power supply. Adapter Click communicates using MikroBUS.
- Simplifies connection of add-on boards with IDC10 headers to mikroBUS socket
- Features both male and female IDC10 connectors
- 2 x 5 connection pads
- 2 jumpers for SPI/I2C selection
- Suitable for 3.3 V or 5 V power supply
Two Ways of Establishing Connection
The user can establish a connection using male or female IDC10 connectors (provided with the package). The male IDC10 header can be soldered on the top side of Adapter Click and connected to the add-on board directly or through IDC10 flat cable. The female header socket seems as a superior choice in some cases. The user can solder the header either on the top or the bottom, depending on what seems more convenient according to the circumstance.
Adapter Click features two jumpers: one for communication interface selection between SPI or I2C and other is to choose between 3.3V or 5V power supply.
- Adapter Click Board (1)
- 1x8 male headers (2)
- Printed User Manual and Board Schematic (1)