BBF-8N Backup-Boot Flash
The Backup Boot Flash is an ingenious tool created by DediProg to force the application controller to work automatically on the backup SPI Flash inserted in our tool SO8N socket and no more on the Main Serial Flash soldered on board. At the connection on board, the BBF-8N tool will automatically disable the Main Serial Flash that does not need to be unsoldered. The BBF tool can be connected to the application with: - A BBF cable (included) to the application 2X4 2.54mm pin header - The BBF cable (included) to our SMT 1.27mm Pin Header (included) soldered in place of the Main Serial flash footprint for a better stability. - The SO8 Test Clip (to be purchased separately) to be connected on the Main Serial flash package soldered on board (no need of connector). The Serial Flash can be easily changed manually thanks to the SO8N socket or even updated by connecting our.
- BBF-8N backup boot flash module with SO8N socket (1)
- BBF cable with 2.54mm pitch 2x5 female header
- SO8 Connection Adaptor for BBF
- 1.27mm 2x4 cable with female header
- 1.27mm 2x4 SMT male header