Button R Click Board
Add a simple pushbutton functionality to your design with the Button R Click Board™ from MikroE. While the user has a freedom to choose from a range of onscreen user interfaces, the tactile feedback from pushing a physical button is hard to replace. The user can set it up depending on the device/design requirement. Any application that user a user-interface design and requires the tactile feel and feedback of a hardware pushbutton, Button R Click Board™ seems to be an ideal choice. On press, the button is designed to send an interrupt signal to the target board microcontroller.
- Transparent push button
- Red LED backlight
- Uses mikroBUS INT pin (for pushbutton)
- Independently controlled LED through PWM pin
- Compatible with Button library in mikroC, mikroBasic and MikroPascal
- 3.3V or 5V power supply
- Supported by all mikroElektronika compilers
Though the user has a choice to make from a range of onscreen UIs, which includes multitouch gestures, swipes, taps and double taps, the tangible button press feel is irreplaceable. The hardware button press works as the most reliable way of telling if the contact has been made.
Transparent Pushbutton with RED Backlight
The hardware button on-board the Button R Click itself is transparent, 6.8mm in diameter, and offered with a red LED backlight. The LED illuminates as and when the button is pressed and is controlled separately through the PWM pin.
- Button R Click Board (1)
- 1x8 male headers (2)
- Printed User Manual and Board Schematic (1)