Click Board 2 for STM32
Put together different Click Board™s and invent fully functional standalone gadgets with utmost ease using the Clicker 2 for STM32. This Click Board™er 2 board is a fast and compact Click Board™ two seater equipped with STM32F407VGT6 32-bit ARM Cortex-M4 microcontroller and two MikroBUS host sockets to provide user with unlimited possibilities to come up with new and original inventions.
The microcontroller is preprogrammed with a fast USB HID MikroBootloader. However, programming the microcontroller can be also done using an external MikroProg for STM32 programmer and MikroProg Suite for ARM software, or using the ST-LINK V2 programmer and MikroProg Suite for ARM software. It comes with an on-board LTC3586-2 power management and battery charger IC that provides an independent, steady power supply to the microcontrollers RTC from the li-polymer battery or USB even when the user push the reset button or toggle the On/Off switch.
This pocket-sized board features the same pair of 1x26 connection pads as mikroMedia™ boards. The MikroBUS host connectors consist of two 1'.
- Based on the STM32F407VGT6 (32-bit ARM Cortex-M4) Microcontroller
- Up to 168 MHz operation
- 2 mikroBUS host sockets
- USB MINI-B connector
- Integrated Ethernet controller
- 1024 KB Flash memory
- 192 KB RAM + 4KB SRAM
- USB 2.0 (OTG, Host, Device)
- 83 GPIOs
- LTC3586-2 power management IC
- Twelve 16-bit timers and two 32-bit timers
- Three 12-bit 24-channel ADCs
- Two 12-bit DACs
- Four USARTs and two UARTs
- RTC, 2x I2C, 3x SPI, 2x CAN
The Clicker 2 for STM32 development tool features STM32F407VGT6 microcontroller featuring various on-chip peripherals. This 32-bit ARM Cortex-M4 MCU operates at up to 168 MHz, has 1 MB of flash and 192+4KB of SRAM. It is also provided with USB 2.0 support.
Programming the Microcontroller
The microcontroller used can be programmed in three ways: Using USB HID mikroBootloader; using external mikroProg for STM32 programmer; using external ST-LINK V2 programmer.
LTC 3586-2 Power Management and Battery Charger
A highly integrated power management and battery charger IC, LTC3586-2, comes with a current limited switching PowerPath manager. It allows charging of a connected battery through USB by turning the USB port into a charger and can provide an independent power supply to the MCU's real-time clock, even when the board's power switch is off.
Clicker 2 for STM32 Board User Manual
- Clicker 2 for STM32 (1)
- 1x26 headers (2)
- 1x5 Header (1)
- Printed User Manual