The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

Storage

Storage


Products

EEPROM 2 Click Board

The EEPROM 2 Click Board carries ST??s M95M02-DR DIP-8 socket EEPROM chip with 256 KB of memory. The chip has byte and page write speeds equal or less than 10 ms.

MIKROE-1909

£21.60

EEPROM 3 Click Board

The EEPROM 3 Click Board provides 2 Mbit (2,097,152 bits) of Electrically Erasable Programmable Read Only Memory, organized in bytes. In other words, this click board is an EEPROM memory medium with the capacity of 256 KB. The used EEPROM module has outstanding endurance, with 1,000,000 write cycles and data retention period of over 100 years. The EEPROM module on this click features Schmitt trigger inputs for better noise protection, self-timed write cycles, it has a dedicated write protect pin for hardware protection of stored data, and error detection and correction logic scheme that ensures reliable data output, staying transparent to the host controller.


.

MIKROE-1989

£16.80

EEPROM 4 Click Board

The EEPROM 4 Click Board is 2,097,152 bits on a click board, organized into 262,144 bytes. In other words, this click board is an EEPROM memory medium with the capacity of 256 KB. The used EEPROM module has very good endurance and it can withstand 1,000,000 write cycles, with the data retaining period of about 40 years. The EEPROM module on this click can work with power supply voltage ranging from 1.7V to 5.5V, it features the self-timed write cycles, doesn??t require erase before writing, has a dedicated write protect pin for hardware protection of stored data, and has a dedicated hold pin used for holding the data transfer.

MIKROE-2536

£18.00

EEPROM Click Board

The EEPROM Click Board from MikroE is an add-on storage board that includes a 24C08WP serial EEPROM with 8 Kbits of memory. Driven by CMOS technology, this click board enables the user to add more 8 Kbit EEPROM memory to the device. An ideal choice for low power and low voltage applications, 24C08WP module is compatible with the I2C memory standard and uses a bi-directional data bus and serial clock. It is available in a DIP packaging. The DIP socket makes EEPROM easily replaceable. EEPROM click works well with both the 100 kHz I2C standard-mode and the 400 kHz I2C fast-mode. The board is designed to operate on 3.3V or 5V power supply, selectable by an SMD jumper. Another set of SMD jumpers that allow address selection are also available on the board. The green LED diode denotes the status of power supply.

The EEPROM click is an ideal selection for storing initialisation and configuration data of your device.

MIKROE-1200

£9.60

EERAM 3.3V Click Board

Add memory to your project with EERAM 3.3V Click Board. It carries the 47L16 EERAM, a 16Kbit SRAM with EEPROM Backup from Microchip. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C interface, with additional functionality provided by the INT pin on the MikroBUS line.

MIKROE-2728

£16.80

EERAM 5V Click Board

Add memory to your project with EERAM 5V Click Board. It carries the 47C16 EERAM, a 16Kbit SRAM with EEPROM Backup from Microchip. The click is designed to run on a 5V power supply. It communicates with the target microcontroller over I2C interface, with additional functionality provided by the INT pin on the MikroBUS line.

MIKROE-2729

£16.80

Flash 2 Click Board

The Flash 2 Click Board™ features a 64 Mbit Flash memory IC, manufactured by using the proprietary high-performance CMOS Super-Flash® technology, which allows the Flash 2 click to withstand up to 100,000 write cycles, with the data retention period of 100 years, which is considerably longer than any other memory module of this type. The flash memory IC used on this Click board™ features Serial Flash Discoverable Parameters (SFDP) mode, used to retrieve the advanced information from the device, such as the operating characteristics, structure and vendor specified information, memory size, operating voltage, timing information, and more.

MIKROE-2267

£14.40

Flash 3 Click Board

Flash 3 Click is a mikroBUS add-on board for adding more Flash Memory to your target board microcontroller. It carries an ISSI IS25LP128 IC with 128 Mbit capacity.

MIKROE-2374

£14.40

Flash Click Board

Introduce additional flash memory to the design with the Flash Click Board. This small accessory board offers an easy and reliable solution for externally storing large amounts of data to be used in the project. The board features an EN25F80 8 megabit serial flash memory with uniform 4 Kbytes sector architecture. Designed for applications that need high performance and low power consumption, it supports clock frequency up to 75 MHz. EN25F80 module comes with software and hardware Write protection that enable the user to Write Protect all or portion of memory via software. The memory is divided into 16 sectors, each containing 256 pages; each page is 256 bytes wide. Flash click communicates with the target board microcontroller through SPI interface. The board is designed to use 3.3V power supply only. The green LED diode denotes the power supply status.

Flash click is an ideal choice for a mass storage option in multimedia devices, drives, optical and printing devices.

MIKROE-1199

£12.00

FRAM 2 Click Board

Additional memory for your next project!.

The FRAM 2 Click Board carries the CY15B104Q 4-Mbit(512K x 8) serial F-RAM from Cypress. A ferroelectric random-access memory or F-RAM is non-volatile and performs reads and writes similar to a SRAM. You can access the memory using an industry-standard serial peripheral interface (SPI) bus.On the functional level, the F-RAM operates in a similar way as serial flash and serial EEPROMs. The major difference between the CY15B104Q and a serial flash or EEPROM with the same pinout is the F-RAM's superior write performance, high endurance, and low power consumption.

MIKROE-2768

£22.80

FRAM Click Board

Now bring 256K of fast additional memory to your design with FRAM Click Board. This add-on storage board features a Fujitsu MB85RS256A IC, which is a 256K FRAM (Ferroelectric Random Access Memory) module. The MB85RS256A module employs the ferroelectric process and silicon gate CMOS technologies to form the non-volatile memory cells. Being non-volatile, it is capable of retaining data without requiring a back-up battery, unlike SRAM. In addition, FRAM click can also provide high-speed write operation and can be used for up to 10 billion read/write operations. FRAM click uses the MikroBUS SPI (MISO, MOSI, SCK, CS), RST and PWM lines to communicate with the target board. The maximum SPI operating frequency is 25 MHz. The board is designed to use 3.3V power supply only.

The FRAM Click Board is an ideal option for the log management and the storage of the resume data, etc.

MIKROE-1486

£18.00

MRAM Click Board

The MRAM Click Board features MRAM module which contains 262,144 magnetoresistive memory cells, organized into 32,768 bytes of memory. It means that MRAM click is a memory storage device with 32KB of memory space. The used memory module can withstand an unlimited number of write cycles, it has data retention period greater than 20 years and it can read and write to random addresses with no delay.

MIKROE-2914

£21.60