The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

Dediprog Adapters

Dediprog Adapters


Products

ISP-TC-8 SO8 Test Clip

The Dediprog ISP SO8 Test Clip is used to connect the ISP SF100 programmer to the Main Serial Flash soldered on board offering the possibility to update directly The Serial Flash content if no ISP connector is mounted on board.

ISP-TC-8

5 in stock

£74.40

(from 1 to 5)

ISP-UADP-127/254 SF100 Universal Adapter

ISP-UADP-127/254 SF100 Programmer Universal Adapter connects s SF100 programmer to a 1.27mm or 2.54mm header.

ISP-UADP-127/254

9 in stock

£22.80

(from 1 to 9)

ISP1-CB ISP Cable

The Dediprog ISP1-CB cable is used to connect the ISP SF100 programmer to the 2X4 2.54mm ISP Pin Header on board offering the possibility to update directly The Serial Flash content.

ISP1-CB

£14.40

(from 1 to 0)

SO Adapter for EM100Pro

The EM-PRO-COMN-SO adaptor for EM100 & EM100Pro is used to connect EM100 or EM100Pro (2.54mm 2x10) to 1.27mm pin header (both of SO8 or SO16W) soldered on the application. In this way the application can work (boot) from EM100 directly.

EM-PRO-CON-SO

£21.60

Out of stock, you can preorder

SO16 Test Clip for EM100Pro and SF600

The EM-TC-16 SO16W Test Clip for EM100, EM100Pro& SF600 is used to connect the EM100, EM100Pro and SF600 to the Main Serial Flash soldered on board.

It also offers the possibility to the application controller to work on the EM100, EM100Pro and SF600 automatically without a need of connector.

EM-TC-16

10 in stock

£85.20

(from 1 to 10)

SO8 Test Clip for EM100Pro and SF600

The SO8 Test Clip for EM100, EM100Pro& SF600 is used to connect the EM100, EM100Pro and SF600 to the Main Serial Flash soldered on board offering the possibility to the application controller to work on the EM100, EM100Pro and SF600 automatically without a need of connector.

EM-TC-8

11 in stock

£78.00

(from 1 to 11)

Split Cable for EM100Pro and SF600

The EM-SP-CB 10-pin Split Cable has a 10 pin header which can be connected to the Serial Flash Emulator (EM100 or EM100Pro) and SF600 programmer directly.

EM-SP-CB

10 in stock

£49.20

(from 1 to 10)