Dediprog SF100 SPI NOR Flash Programmer
for NOR Flash devices
-
In-Circuit SPI Programmer with USB Interface.
-
A Single PC Will Support Multiple Programmers. Ideal for Production.
-
A Powered Target is Supported with Signal Conflict Protection
-
GUI Windows Software Included from Win 2003 to Win 10, 32 and 64-bit
-
Buy from the UK Authorised Dediprog Distributor
The SF100 is a high speed "In System Programming" programmer to update the SPI NOR Flash soldered on board or Freescale MCU using Ezport. The programmer is easily controlled from a PC or Linux machine using the supplied DediProg Software. The connection to the host PC is via the USB interface.
The perfect programming tool that can be easily controlled through the DediProg software through the USB. The SF100 is designed with a ISP header and users can connect the programmer and drive the SPI signals, supply the memory and control the application status or controller.
Hardware
The Dediprog SF100 is designed with an ISP header, through an appropriate connector; users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the SF100 2x7 header pin out. DediProg also provides the SF100 ISP Cable which is used to connect the SF100 programmer to the 2X4 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF100 ISP Cable 2x4 pin out.
Table 1: SF100 ISP Header Pin Out (2x7)
1 | I/O1 | I/O4 | 2 |
3 | I/O2 or CS2 | NC | 4 |
5 | Vcc | GND | 6 |
7 | CS | CLK | 8 |
9 | MISO | MOSI | 10 |
11 | Vpp/Acc | I/O3 | 12 |
13 | SCL | SDA | 14 |
Table 2: ISP Cable Connector Pin Out (2x4)
1 | Vcc | GND | 2 |
3 | CS | CLK | 4 |
5 | MISO | MOSI | 6 |
7 | Vpp/Acc | I/O3 | 8 |
SF100 Application Software
The SF100 USB software tool chain offers high flexibility and fits different and the highest requirements:
Engineering Mode
For engineers and expert to access advanced features for development, repairing etc.
Production Mode
The SF100 Application software supports Gang Programming. Additional programmers can be added at any time production capacity needs to be increased.
For operators in production to control multiple programmers and improve the throughput.
Command Line
Customer software can control multiple SF100 programmers by command line interface.
Hardware Requirement for ISP :
To have a clear understanding on the different ISP or backup boot methods and different reference schematics, please download our dedicated application notes: AN0103 and AN0106
-
What is Included 01SF100 Programmer
-
What is Included 02ISP-UADP-127 SF100 Universal Adaptor
-
What is Included 03ISP1-CB cable
-
What is Included 04BBF-CB cable
-
What is Included 051.27mm 2x4 Cable with Female Header
-
What is Included 06USB cable
-
What is Included 07CD-ROM with Software, Specifications and User Manual
-
What is Included 081.27mm 2x4 Cable with Female Header
-
Dediprog BBF-D8W Backup Boot Flash Module-Dual SO8W
Out of Stock - Order Now, Ships within 10 days-
11% less
-