Programmer Adapters

Products: 19 of 9
  • Dediprog Backup Boot Flash Module-SO8W (207mil)

    The Backup Boot Flash QUAD (BBF-QUAD-8W) is an ingenious tool created by DediProg to allow the application controller to work on the backup SPI Flash inserted in our tool SO8W socket. It allows the application controller to access the backup SPI Flash with SPI single/Dual/Quad IO mode.

    The BBF-QUAD tool can be connected to the application with:

    • Our BBF cable (included) to the application 2X5 2.54mm pin header.
    • Our BBF cable (included) to our SMT 1.27mm Pin Header (included) soldered in place of the Main Serial flash footprint for a better stability.

    The Serial Flash can be easily changed manually thanks to the SO8W socket or even updated by connecting our SF100 or SF600 programmer. The SF100/SF600 programmer is completely transparent for the application and will offer to developer high flexibility for code trials or update. When using BBF-Quad on a board, the soldered spi flash needs to be removed.

    • Support 3.3V~1.8V SOP8W SPI NOR Flash
    • Support Quad IO R/W between Backup Serial Flash and application board
    • Backup Serial Flash can be easily updated by connecting the SF100/SF600 programmer

    For offline programming demand only, it is recommended to use socket adaptor.

    Not rated yet
    • $124.76
    • Including 20% UK VAT*
    Out of stock
  • Dediprog BBF-16W Backup Boot Flash Module-SO16W
    • 15% less

    Dediprog BBF-16W Backup Boot Flash Module-SO16W

    The Backup Boot Flash is an ingenious tool created by DediProg to force the application controller to work automatically on the backup SPI Flash inserted in our tool SO16W socket and no more on the Main Serial Flash soldered on board. At the connection on board, the BBF tool will disable automatically the Main Serial Flash that does not need to be unsoldered.

    Not rated yet
    • $124.76
    • Including 20% UK VAT*
  • Dediprog BBF-8N Backup Boot Flash Module-SO8N
    • 15% less

    Dediprog BBF-8N Backup Boot Flash Module-SO8N

    The Backup Boot Flash is an ingenious tool created by DediProg to force the application controller to work automatically on the backup SPI Flash inserted in our tool SO8N socket and no more on the Main Serial Flash soldered on board. At the connection on board, the BBF tool will disable automatically the Main Serial Flash that does not need to be unsoldered.

    Not rated yet
    • $124.76
    • Including 20% UK VAT*
  • Dediprog BBF-8W Backup Boot Flash Module-SO8W
    • 15% less

    Dediprog BBF-8W Backup Boot Flash Module-SO8W

    The Backup Boot Flash is an ingenious tool created by DediProg to force the application controller to work automatically on the backup SPI Flash inserted in our tool SO8W socket and no more on the Main Serial Flash soldered on board. At the connection on board, the BBF tool will disable automatically the Main Serial Flash that does not need to be unsoldered.

    Not rated yet
    • $124.76
    • Including 20% UK VAT*
  • Dediprog BBF-D8W Backup Boot Flash Module-Dual SO8W
    • 11% less

    Dediprog BBF-D8W Backup Boot Flash Module-Dual SO8W

    The Dual SO8W Backup Boot Flash is an ingenious tool created by DediProg to force the application controller to work automatically on the two backup SPI Flash inserted in our tool SO8W sockets and no more on the two Main Serial Flash soldered on board. At the connection, the BBF tool will disable automatically the two Main Serial Flash that does not need to be unsoldered.

    The BBF Dual SO8W tool allows working on two Backup Serial Flash providing that they are controlled by the same SPI bus and two different Chip select in the application board.

    Not rated yet
    • $177.30
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 10 days
  • Dediprog BBF-DIP Backup Boot Flash Module-DIP
    • 19% less

    Dediprog BBF-DIP Backup Boot Flash Module-DIP

    The Backup Boot Flash-DIP is an ingenious tool created by DediProg to force the application controller to work automatically on the backup SPI Flash inserted in our tool DIP socket and no more on the Main Serial Flash soldered on board. At the connection on board, the BBF tool will disable automatically the Main Serial Flash that does not need to be unsoldered.

    The BBF-DIP can be used as emulator by connecting it to the application DIP socket (remove the DIP serial flash on the application) with our BBF cable (included) and DIP cable adaptor. Or the BBF DIP can be used as a programmer for serial flash in DIP packages if used together with SF100.

    The Serial Flash can be easily changed manually thanks to the DIP socket or even updated by connecting our SF100 programmer. The SF100 programmer is completely transparent for the application and will offer to developer high flexibility for code trials or update.

    Please note that the BBF modules only support 3.3V/2.5V IC.
    For offline programming demand only, it is recommended to use socket adaptor.

    Not rated yet
    • $105.06
    • Including 20% UK VAT*
  • Dediprog IN-EMMC-ADP eMMC Carrier Board For Intel Only

    The Dediprog IN-EMMC-ADP is a dedicatedc adaptor for Intel eMMC carrier board.

    The connector on Intel board is mate P/N: Samtec QTH-030-01-C-D-K-TR

    The adapter has been designed for use with the StarProg-U for eMMC applications.

    698[1].jpg

    Not rated yet
    • $72.23
    • Including 20% UK VAT*
    Out of stock
  • Dediprog IN-EMMC-SW eMMC Switch Board For Intel Only

    The IN-EMMC_SW is a dedicated adaptor for Intel eMMC switch board.

    The adapter is designed for use with the StarProg-U programmer for eMMC switching applications.

    750[1].gif

    Not rated yet
    • $315.19
    • Including 20% UK VAT*
    Out of stock
  • SO16W Connection Adaptor for BBF
    • 24% less

    SO16W Connection Adaptor for BBF

    BBF-CON-16 SO16W Adapter.

    Not rated yet
    • $22.06
    • Including 20% UK VAT*

Bestsellers

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.