United States en USD

  • Location & Currency

     
     

Programmer Cables

Products: 1–16 of 25
Show: 16
Sort by: Name A - Z
  • Dediprog 10-Pin ATE Port Split Cable (2.54mm)

    Dediprog 10-Pin ATE Port Split Cable (2.54mm)

    This 10-pin split cable has a 10-pin header, which can be connected to the ISP adaptor's ATE port of StarProg-A/K110/SF700 directly. Each individual lead is terminated with a single pin crimp connector with the same 0.100" (2.54mm) pitch. The cable is 30 cm long.

    Not rated yet
    • $50.76
    Out of Stock - Order Now, Ships within 10 days
  • Dediprog ATE-SP-CB 14-Pin ATE Split Cable (2.54mm)

    Dediprog ATE-SP-CB 14-Pin ATE Split Cable (2.54mm)

    The 14-Pin Split Cable has a 14-pin header, which can be connected to the StarProg-ATE header (For ATE Port) directly. Each individual split cable has different color and is labeled with the pin name so they are easy to identify. Each individual lead is terminated with a single pin crimp connector with the same 0.100" (2.54mm) pitch. The cable is 30 cm long.

    Not rated yet
    • $50.76
    Out of stock
  • Dediprog ATE-SP-CB-20 20-Pin ISP Split Cable (2.54mm)

    Dediprog ATE-SP-CB-20 20-Pin ISP Split Cable (2.54mm)

    This 20-Pin Split Cable has a 20-pin header, which can be connected to the ICP Port of programmer or ISP adaptor directly. User can use it on StarProg-ATE/StarProg-A/SF700. Each individual lead is terminated with a single pin crimp connector with the same 0.100" (2.54mm) pitch. The cable is 20 cm long.

    Not rated yet
    • $50.76
    Out of stock
  • Dediprog BBF Grabber Cables For Dual SPI Flash

    Dediprog BBF Grabber Cables For Dual SPI Flash

    Not rated yet
    • $27.07
    Out of stock
  • Dediprog BBF Testclip (SO16W 300mil)
    • 17% less

    Dediprog BBF Testclip (SO16W 300mil)

    The BBF SO16W Test Clip is used to connect the Backup Boot Flash Tool to the Main Serial Flash soldered on board offering the possibility to the application controller to work on the Backup Flash automatically without the need of connector.

    The BBF SO16W Test Clip is frequently used in combination with the Backup Boot Flash Tool to develop Bios code or repair Desktop and notebook using Serial Flash.

    • Compatible with most of the applications (no hardware modification needed)
    • Compatible with SO16W package
    Not rated yet
    • $77.55
  • Dediprog BBF Testclip Dual Flash (SO16W 300mil)
    • 19% less

    Dediprog BBF Testclip Dual Flash (SO16W 300mil)

    The BBF Dual SO16W Test Clip is used to connect the Dual Backup Boot Flash Tool to the Two Main Serial Flash soldered on board offering the possibility to the application controller to work on the Two Backup Flash automatically without any need of connectors.

    • One SO16W Test Clip to be connected on the First Serial Flash package.
    • Two individual Test Clips to be connected on the Chip select and Hold pin of the second Serial flash.
    • The BBF Dual SO16W Test Clip is frequently used in combination with the Dual Backup Boot Flash Tool to develop Bios code or repair Desktop and notebook using Serial Flash.
    • Compatible with most of the applications (no hardware modification needed).
    • Compatible with SO16W packages.
    Not rated yet
    • $105.75
    Out of Stock - Order Now, Ships within 10 days
  • Dediprog BBF-CB Cable to BBF Modules
    • 9% less

    Dediprog BBF-CB Cable to BBF Modules

    The SF100 To BBF Cable is used to connect SF100 programmer to BBF module. SF100 To BBF Cable is a standard accessory to BBF module. User does not need to buy SF100 To BBF Cable separately unless the existing SF100 To BBF Cable is damaged.

    Not rated yet
    • $16.92
  • Dediprog BBF-CB2 Backup-Boot Flash Cable
    • 9% less

    Dediprog BBF-CB2 Backup-Boot Flash Cable

    The Dediprog BBF-CB2 cable adaptor connects the 1.27mm pin header soldered on the application and Dediprog Backup Boot flash module-SO8W Socket so that the application can work(boot) from the Backup Boot Flash module-SO8W socket.

    Not rated yet
    • $33.84
  • Dediprog BBF-CB3 Backup-Boot Flash Cable
    • 9% less

    Dediprog BBF-CB3 Backup-Boot Flash Cable

    The Dediprog BBF-CB3 cable adaptor connects the two 1.27mm 2x4-pin headers soldered on the application and Dediprog Backup Boot flash module-Dual SO8W Sockets so that the application can work(boot) from the Backup Boot Flash module-SO8W Socket.

    Not rated yet
    • $40.61
  • Dediprog BBF-CB6 SF100 To BBF Cable

    Dediprog BBF-CB6 SF100 To BBF Cable

    SF100 To BBF Cable is used to connect SF100 programmer to BBF module. SF100 To BBF Cable is a standard accessory to BBF module. User does not need to buy SF100 To BBF Cable separately unless the existing SF100 To BBF Cable is damaged.

    Not rated yet
    • $16.92
    Out of stock
  • Dediprog BBF-SP-CB BBF Split Cable

    Dediprog BBF-SP-CB BBF Split Cable

    The Dediprog BBF-SP-CB 10-Pin Split Cable has a 10-pin header which can be connected to the Backup Boot Flash (BBF) Modules directly. Each individual split cable has a different colour and is labelled with the pin name so that they are easy to identify. Each individual lead is terminated with a single pin crimp connector with the same 0.100" (2.54mm) pitch. The cable is only 12cm long to minimise signal degradation.

    237[1].png

    Not rated yet
    • $67.68
  • Dediprog CB-24-127 1.27mm 2x4 to 1.27mm 2x4 Cable

    Dediprog CB-24-127 1.27mm 2x4 to 1.27mm 2x4 Cable

    The 1.27mm 2x4 Cable with Female Header is used to connect SO Connection Adaptor for EM100 & EM100Pro or SO8 Connection Adaptor for BBF to 1.27mm 2x4 SMT male header soldered on board.

    • The cable is only 8cm long to minimise signal degradation.
    • The Red line on the cable indicates the location of Pin 1.
    Not rated yet
    • $27.07
    Out of Stock - Order Now, Ships within 10 days
  • Dediprog CB-24-127-2.5cm 1.27mm 2x4 to 1.27mm Cable

    Dediprog CB-24-127-2.5cm 1.27mm 2x4 to 1.27mm Cable

    The 1.27mm 2x4 Cable with Female Header is used to connect SO Connection Adaptor for EM100 & EM100Pro or SO8 Connection Adaptor for BBF to 1.27mm 2x4 SMT male header soldered on board.

    • The cable is only 2.5 cm long to minimize signal degradation.
    • The Red line on the cable indicates the location of Pin 1.
    Not rated yet
    • $27.07
    Out of Stock - Order Now, Ships within 10 days
  • Dediprog EE100-CB1 ISP Cable For EE100 and K110

    Dediprog EE100-CB1 ISP Cable For EE100 and K110

    The EE100 Cable is used to connect the EE100 programmer to the 2X5 ISP Pin Header on board offering the possibility to update directly the EEPROM content. The cable is a standard accessory with EE100. 


    EE100 ISP Header Pin Out (2x7)

     

    ISP Cable Connector Pin Out (2x5)



    Not rated yet
    • $20.30
    Out of stock
  • Dediprog EM-DIP-CB SO8 DIP Cable

    Dediprog EM-DIP-CB SO8 DIP Cable

    The EM100Pro DIP Cable is used to connect the EM100Pro to the target application using DIP engineering socket. The cable is a standard accessory with EM100Pro.

    Not rated yet
    • $84.60
    Out of stock
  • Dediprog EM-SP-CB 10-Pin Split Cable With 2x10 Connector

    Dediprog EM-SP-CB 10-Pin Split Cable With 2x10 Connector

    The 10-Pin Split Cable has a 10 pin header which can be connected to the Serial Flash Emulator (EM100 or EM100Pro) and SF600 programmer directly. Each individual split cable has a different color and is labeled with the pin name so that they are easy to identify. Each individual lead is terminated with a single pin crimp connector with the same 0.100" (2.54mm) pitch. The cable is only 12cm long to minimize signal degradation. The Grabber on the hold pin can be used to grab the hold pin of the soldered serial flash on the target board in case there is no hold pin designed on the target board pin header. 

    313[1].png

    Not rated yet
    • $84.60
    Out of Stock - Order Now, Ships within 10 days
Products: 1–16 of 25
Show: 16

Bestsellers

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.