Maxim Integrated develops integrated circuits (ICs) for the automotive, industrial, communications, consumer, and computing markets.

Maxim became famous following the introduction of the MAX232 device in the 1980s.

Maxim Integrated Device Support

Products: 17 of 7
  • 2 x 20W Amp Click Board™

    The 2x20W Amp Click Board™ is a Stereo, 20W high-performance digital amplifier.

    The board is based on the MAX9744 stereo class D audio power amplifier from Maxim. This Click Board™ brings the Class AB sound performance with Class D efficiency. The perfect combination for your speakers. 2x20W Amp Click Board™ also offers 64 step volume control, single-supply operation, adjustable gain, and industry-leading Click Board™-and-pop suppression.


    .


    Not rated yet
    • $26.92
    • Including 20% UK VAT*
  • Buck 5 Click Board™

    The Buck 5 Click Board™ is a high-efficiency buck (step-down) DC/DC converter, which can provide digitally adjusted step-down voltage on its output while delivering a considerable amount of current. Buck 5 Click Board™ accepts a wide voltage range on its input - from 5V to 30V. The output voltage may be adjusted via the SPI interface, in the range from 0.9V to approximately 5.5V. This Click Board™ utilises the MAX17506, an integrated high efficiency, synchronous step-down DC/DC converter with internal feedback compensation, from Maxim Integrated. In addition, the MAX5401 digital potentiometer with SPI Interface is used on the feedback loop allowing digital control of the output voltage.

    Not rated yet
    • $37.18
    • Including 20% UK VAT*
  • Charger 12 Click Board™

    The Charger 12 Click Board™ is a single lithium-ion (Li+) cell or three-cell NiMH/NiCd battery charger. This Click Board™ can be used for Low-Cost Li-Ion battery chargers, or Power Tools, toys, backup energy storage solutions, etc. Charger 12 Click Board™ is based on MAX1501 controller which has some extra features enabling charging without too much hassle. This Click Board™ board has charging current control which uses SPI interface through MCP4161 IC, which is an 8-bit digital potentiometer. On the board, there is a Power LED and two extra LED’s which can be used for charging indications.

    Not rated yet
    • $19.23
    • Including 20% UK VAT*
  • Current Limit Click Board™

    The Current Limit Click Board™ is a compact add-on board that contains a low-voltage, P-channel MOSFET power switch intended for high-side load switching applications. This board features the MAX890L, a low-resistance power switch with the adjustable, accurate current limit system, and thermal shutdown from Maxim Integrated. Its internal current-limiting circuitry protects the input supply against overload, while thermal protection limits power dissipation. The maximum current limit is 1.2A and can be programmed through a digital potentiometer MAX5401. The quiescent supply current has a low value of 10μA in the active state, while in its off state the supply current decreases to 0.1μA. This Click board™ is suitable for applications in some portable equipment, access bus slots, or with power supplies, protecting them in cases of a short circuit or other overload conditions.

    Current Limit Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $19.23
    • Including 20% UK VAT*
    Out of stock
  • ECG 6 Click Board™

    The ECG 6 Click Board™ is a complete solution for the development of ECG and Heart-Rate (HR) applications. It features the MAX86150, a Reflective Heart Rate Monitor and Medical-Grade Pulse Oximeter from Maxim Integrated. The Click board™ contain integrated electrocardiogram, pulse oximeter, heart rate monitor sensor module. The ECG 6 Click can be used for application in Fitness Assistant Devices, Wearable Devices, Smartphones, Tablet.

    The ECG 6 click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Note: ECG 6 is a development and prototyping tool. It is not intended to be used for medical treatment of patients, and should not be used to diagnose or treat any conditions.

    Not rated yet
    • $37.18
    • Including 20% UK VAT*
  • Heart Rate 2 Click Board™

    The Heart Rate 2 Click Board™ is an add-on board based on MAXM86161 from Maxim Integrated a complete, integrated, optical data acquisition system, ideal for optical pulse oximetry and heart-rate detection applications. The optical readout has a low-noise signal conditioning analog front-end (AFE), including 19-bit ADC, an industry-lead ambient light cancellation (ALC) circuit, and a picket fence detect and replace algorithm. It also includes high-resolution optical readout signal processing channels with robust ambient light cancellation and high-current LED driver DACs to form a complete optical readout signal chain.

    Heart Rate 2 Click board™ is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $29.49
    • Including 20% UK VAT*
  • RTC 7 Click Board™

    The RTC 7 Click Board™ is a real time clock module which has an extremely low power consumption, allowing it to be used with a single button cell battery or a super capacitor, for an extended period of time. The MAX31341B IC built on the RTC 7 Click Board™ is able to output the time in the binary coded decimal (BCD) format. Integrated, factory calibrated XTAL operating at 32.768 kHz ensures a very low time deviation.

    However, the RTC 7 Click Board™ has the on-board external, more precise crystal oscillator too. An advanced interrupt feature allows many different uses such as alarm function, countdown timer function, external event detection function, using an analog and the digital inputs and much more.

    Not rated yet
    • $21.80
    • Including 20% UK VAT*
* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.