Renesas Electronics Device Support

Products: 14 of 4
  • Buck-Boost 3 Click Board™

    The Buck-Boost 3 Click Board™ is a voltage converter/regulator, which is able to provide a regulated voltage of 3.3V or 5V on the output, even when the input voltage drops under 3V. This is possible thanks to the ISL85403, a specialised buck-boost voltage converter IC which features an integrated high-side MOSFET and a low-side driver, that can be used to drive an external MOSFET. Buck-Boost 3 Click Board™ perfectly suited to provide power with regulated voltage for embedded applications, points of load, or to be used as the battery voltage regulator, or in similar general-purpose power applications that require regulated 3.3V or 5V power supply.

    Not rated yet
    • $34.41
    • Including 20% UK VAT*
  • Color 2 Click Board™

    The Color 2 Click Board™ is a compact add-on board that allow the user to introduce colour sensing functionality to the design. It features an ISL29125 RGB colour light sensor that aids user to detect red, green and blue in a variety of lighting conditions. It outputs data from 5.7m lux-10,000 lux, providing an accurate spectral response by converting colours into 12 or 16-bit data. The user can select the range (narrower vs. wider bandwidth) and output resolution (12 vs. 16 bit). 

    Featuring an integrated ADC, the colour 2 Click Board™ rejects 50Hz and 60Hz flicker from artificial light sources. Along with that, ISL29125 chip has an IR blocking filter, which means it can reliably operate under dark glass covers. colour 2 Click Board™ communicates with the target microcontroller through the MikroBUS I2C interface (SCL and SDA pins). A programmable interrupt pin provides additional functionality. It works using a 3.3V power supply only.

    The colour 2 Click Board™ is an ideal choice for an ambient light colour detector, dynamic display colour balancing, OLED display ageing compensation, printer colour enhancement and much more.

    Not rated yet
    • $20.39
    • Including 20% UK VAT*
  • PLL Click Board™

    The PLL Click Board™ is a frequency multiplier which uses the Phase-Locked Loop (PLL) techniques to provide a high-frequency clock output from a cheap, standard fundamental mode crystal oscillator. In addition to this, PLL Click Board™ also offers a choice between nine different multiplication factors, programmed via states of the two input pins. The output range of the PLL Click Board™ goes up to 160MHz.

    Not rated yet
    • $19.12
    • Including 20% UK VAT*
  • Qi Receiver Click Board™

    The Qi Receiver Click Board™ is based on the P9025AC 5W Qi wireless power receiver integrated circuit, with the advanced Foreign Object Detection (FOD) feature, from IDT. The Click Board™ utilizes the principles of the inductive coupling for the purpose of wireless power transfer. Recently, the WPS Qi wireless power transfer standard is becoming widely used, for example - wireless charging of the batteries on many Qi wireless power charging compliant devices. 

    Qi Receiver Click Board™ is well-suited for a wide range of applications, including cell phones, tablets, PC peripherals, medical devices, small hand-held devices, in robotics, embedded electronics, etc. 

    Note: Qi Receiver Click Board™ has to be placed near the suitable Qi Transmitter, also known as the charging pad, to successfully harvest the transmitted power.

    Not rated yet
    • $38.24
    • Including 20% UK VAT*

Bestsellers

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.