Silicon Laboratories, Inc. (Silicon Labs) is a worldwide fabless semiconductor company headquartered in Austin, Texas, United States. Silicon Labs provides silicon, software and solutions for the Internet of Things (IoT), Internet infrastructure, industrial automation, consumer and automotive markets.

Silicon Labs Device Support

Products: 16 of 6
  • Clock Gen Click Board™

    The Clock Gen Click Board™ offers an ideal replacement for crystals, crystal oscillators, VCXOs, phase-locked loops (PLLs), and fanout buffers in cost-sensitive applications. This Click Board™ features the Si5351A from Silicon Labs, an I2C configurable clock generator based on a PLL + high resolution MultiSynth fractional divider architecture which can generate any frequency up to 200 MHz on each of its outputs with 0 ppm error. 

    The Si5351A is capable of generating synchronous or free-running non-integer related clock frequencies at each of its outputs (CLK0, CLK1, and CLK2), enabling one device to synthesize clocks for multiple clock domains in a design. It eliminates the need for higher cost, custom pullable crystals while providing reliable operation over a wide tuning range. The Si5351C offers the same flexibility but synchronizes to an external reference clock. 

    Not rated yet
    • $16.63
  • ISM RX 2 Click Board™

    The ISM RX 2 Click Board™ is a compact add-on board that contains a pin configurable, low current, sub-GHz EZRadio® receiver. This board features the Si4356, a standalone Sub-GHz RF receiver IC, from Silicon Labs, which provides a true plug-and-play receive option. The Si4356 features a (G)FSK/OOK demodulator, and it has a good sensitivity up to –113 dBm that allows longer operating range, while the low current consumption of 12 mA in Active and 50 nA in Stand-by Mode provides superior battery life. This Click board™ is suitable for remote low-speed communication, such as the remote keyless access, garage or gate doors control, industrial control, home automation, and similar applications where this kind of communication is applicable.

    ISM RX 2 Click Board™ is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $16.63
  • Proximity 13 Click Board™

    The Proximity 13 Click Board™ is based on SI1153-AB09-GMR IC from Silicon Labs that can be used as an proximity, and gesture detector with I2C digital interface and programmable-event interrupt output. The host can send command the Proximity 13 click to initiate on-demand proximity measurements. The host can also place the click board in an autonomous operational state where it performs measurements at set intervals and interrupts the host either after each measurement is completed or whenever the sample is larger/smaller than a set threshold value or exits/enters a set threshold window.

    Proximity 13 Click board™ is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $14.41
  • PWM driver Click Board™

    If you need to control DC motors with loads up to 10A, the PWM Driver Click Board™ is the perfect solution, thanks to the Silicon Lab Si8711CC one-channel isolator. It communicates with the target MCU over PWM pin, and runs on a 5V power supply. It can be used in a wide variety of ways, from controlling light intensity to serving as an ON/OFF switch to control DC load circuits.

    Not rated yet
    • $15.52
  • Temp&Hum 2 Click Board™

    The Temp&Hum 2 Click Board™ is a smart temperature and humidity sensor Click Board™, packed with features, that allow easy and simple integration into any design that requires accurate and reliable humidity and temperature measurements. It measures a wide range of temperature and relative humidity values with a great accuracy. The Si7034 sensor IC from Silicon labs used on this Click Board™ utilises the patented industry-standard low-K polymeric dielectrics for humidity sensing. It allows low drift and, power consumption, low hysteresis, and excellent long-term stability.

    Not rated yet
    • $17.73
  • USB UART 3 Click Board™

    The USB UART 3 Click Board™ is a versatile and feature-rich USB to UART interface from Silicon Labs. It uses CP2102N which is a part of their USBXpress family. These devices are designed to quickly add a USB 2.0 full-speed compliant UART interface for custom applications, by eliminating firmware complexity and reducing development time. The Click Board™ requires appropriate drivers to be installed in the host OS, in order to support the virtual COM port functionality. Once installed, this device offers amazing connectivity options, up to 3 Mbaud, a very low number of external components, simplified setup of the advanced options via the GUI-based configuration utility (if required), out-of-the-box functionality with the royalty-free virtual COM port drivers, provided by the Silicon Labs.

    Not rated yet
    • $16.63


* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.