Digital I/O Cable
The Total Phase TP320710 provides grabber clips to help connect the digital IO interface of the Beagle™ USB 480, 5000 and Komodo™ CAN protocol analyser to external logic signals.
- 0.46m (1.5ft) cable with grabbers
- 8 - signal wires plus signal ground
- Colour coded wires with labels
The Digital IO Cable with 9 -Grabber Clips (GND and 8 - signals) offers Beagle™ USB 480 and 5000 Protocol Analysers and Komodo™ CAN Duo Interface users the convenience of having grabber clips to connect to external logic signals.
Each individual lead is a different colour and is labelled with the pin name so that they are easy to identify. The grabber clip is nominally 44mm long. The cap body width is 2.54mm wide and roughly 21.5mm long. The hook of the grabber clip is 0.51mm wide with a maximum opening of 3.18mm.
The connector is a standard Mini-DIN9 connector to interface with the Digital IO port on the Beagle™ USB 480 and 5000 Protocol Analysers and the Komodo™ CAN Solo/Duo Interface.
- Digital I/O Cable (1)