Split Cable for EM100Pro and SF600
The EM-SP-CB 10-pin Split Cable has a 10 pin header which can be connected to the Serial Flash Emulator (EM100 or EM100Pro) and SF600 programmer directly.
Each individual split cable has a different colour and is labelled with the pin name so that it can be easy to identify. Each individual lead is terminated with a single pin crimp connector with the same 0.100" (2.54mm) pitch.
The cable is only 12cm long to minimise signal degradation. The Grabber on the hold pin can be used to to grab the hold pin of the soldered serial flash on the target board in case there is no hold pin designed on the target board pin header.
- Split Cable (1)