The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

Atmel AVR Development Boards

Atmel AVR Development Boards


Products

SALE

AVR module for PVK40

The ASIX AVR4PVK is an optional accessory for the PVK40 development board. It allows to use an ATmega64 microcontroller from the AVR family by Atmel with PVK40.

AVR4PVK

£43.45

£18.00 (save 59%)

AVR-Ready2 Board

AVR-Ready2 Board is the best solution for fast and simple development of 28-pin AVR microcontroller applications. It includes connectors for connecting the mikroProg for AVR in-system stand-alone programmer. This programmer enables you to program MCUs without any other additional device. There are also IDC10 connectors linked to the microcontroller pins provided on the board. They enable peripheral modules to be connected to the board, so you can quickly assemble functional working environment that perfectly suits your needs.

The AVR-Ready2 Board features a USB to serial UART interface FT232R which simplifies USB to serial designs and reduces external component count by integrating an external EEPROM, USB termination resistors and a clock circuit requiring no external crystal into the device.

Note: AVR MCU and mikroPROG for AVR programmer are not included in the price!

MIKROE-417

£34.80

SALE

AVRPLC16 v6 PLC System

The AVRPLC16 v6 PLC System is a full-featured development platform intended for developing and designing industrial, home or office control devices using Atmel AVR microcontroller.

This AVR based PLC system is controlled by ATMEGA32 microcontroller which is connected to 8 MHz oscillator and the rest of the board peripherals. The microcontroller can be replaced by any other AVR microcontroller with a similar pinout. The development system features numerous modules using different communication modules, such as RS-485, RS-232, Ethernet, etc. Along with them, it also has ADC module, RTC module, and MMC/SD connector.

The AVRPLC16 v6 PLC System comes equipped with an on-board USB 2.0 AVR programmer that has been specifically designed for In-Circuit Serial Programming (ICSP). This development board also supports Telit GSM/GPRS modules: GM862-GPS, GM862-QUAD-PY, and GM862-QUAD. The AVRPLC16 v6 PLC System is connected to Ethernet via on-board ENC28J60 to provide network connectivity. The board even has mounting ports for antenna cables and screw terminals for adding a speaker and a microphone. It features 8 opto-inputs and 16 relays (for currents up to 16A).

MIKROE-551

£159.00

£150.00 (save 6%)

BIGAVR6 Development Board

BIGAVR6 Development Board.

MIKROE-456

£133.44

BIGAVR6 MCU Card with ATMEGA128

BIGAVR6 MCU Card with ATMEGA128.

MIKROE-457

£27.60

EasyAVR v7 Development System

The EasyAVR is the top selling AVR Development Board for over 64 Atmel AVR MCUs in DIP packaging.

It features USB 2.0 programmer and many essential and useful modules necessary in development. Board comes with the ATMEGA32 MCU.

MIKROE-1385

£178.80

mikroBoard for AVR with ATmega128

The MikroBoard is miniature development tool which includes an ATmega128 microcontroller, programmer, small proto board and two 2x40 female headers for connection with UNI-DS6 development system.

MIKROE-706

£65.88

MINI-AT Board - 3.3V

Believe it or not, this board is a small development system. It barely fits on your finger, but it features ATmega328, USB-UART, reset circuit and LED indicators. It's compatible with standard DIP26 sockets. On-board voltage regulator allows the board to be powered directly from USB cable. It features 16MHz SMD crystal oscillator.

Both come preprogrammed with fast UART bootloader with 57600 bps operation, so no external programmers are needed for development.

MIKROE-672

£21.60

MINI-AT Board - 5V

Believe it or not, this board is a small development system. It barely fits on your finger, but it features ATmega328, USB-UART, reset circuit and LED indicators. It's compatible with standard DIP26 sockets. On-board voltage regulator allows the board to be powered directly from USB cable. It features 16MHz SMD crystal oscillator.

Both come preprogrammed with fast UART bootloader with 57600 bps operation, so no external programmers are needed for development.

MIKROE-671

£21.60

Ready for AVR Board

The Ready for AVR Board is the board for development of devices using 40-pin AVR MCUs. It comes with ATmega16 connected to 8MHz oscillator. It contains four IDC10 headers, USB-UART module, prototyping area and a power supply circuit.

MIKROE-977

£34.80

Ready for PIC-AVR Casing (grey)

Ready for PIC-AVR Case for the Ready for PIC or AVR development boards in white colour.

Great for housing your project as a final product.

MIKROE-1350

£18.00

Ready for XMEGA Board

Ready for XMEGA Board is the best solution for fast and simple development of various microcontroller applications. It comes with ATXmega128A1. It contains double-row smart headers for all available microcontroller ports, USB-UART module, prototyping area and a power supply circuit. Board is specially designed to fit into special white plastic casing which is sold separately.

Board comes preprogrammed with fast UART bootloader which eliminates the need for external programmers. Board also supports PDI programming and has JTAG connector for debugging.

MIKROE-793

£42.00