- Adapter Click Boards™
- Audio and Voice Click Boards™
- Clock and Timing Click Boards™
- Display Click Boards™
- HMI Click Boards™
- Measurement Click Boards™
- MEMS Device Click Boards™
- Miscellaneous Click Boards™
- Mixed-Signal Click Boards™
- Motor Control Click Boards™
- Power Management Click Boards™
- Satellite Navigation Click Boards™
- Sensor Click Boards™
- Serial Interface Click Boards™
- Storage Device Click Boards™
- Wireless Connectivity Click Boards™
- Click Shields
The DTMF Generator Click Board™ is a compact add-on board that generates DTMF (Dual-Tone Multi-Frequency) signals designed for MCU interfaces. This board features the HT9200A, a dual-tone multi-frequency decoder mostly used in mobile communications systems from Holtek Semiconductor Inc.. The HT9200A tone generators can be instructed by an MCU to generate 16 dual tones and 8 single tones from its DTMF pin. It provides a Serial Mode interface, has a low total harmonic distortion and features a low current in the Stand-By mode.
This Click board™ is suitable for various applications such as security systems, home automation, remote control through telephone lines, communication systems, and more.
The Force 2 Click Board™ is a mikroBUS™ add-on board with circuitry for implementing Honeywell’s FSS1500NGT Series force sensors into your projects (with a single zone force sensing resistor included with the click). This Click board™ utilizes FSS1500NGT force sensor which is designed to be one of the most reliable force sensor available as illustrated by 20 million Mean Cycles to Failure (MCTF) at 25 °C [77 °F] rating. This low profile Surface Mount Technology (SMT) sensor allows for automated assembly on a printed circuit board, often helping the customer to reduce assembly costs, while maintainging precise and reliable force sensing performance in a compact commercial-grade package.
Force 2 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
The Hall Current 9 Click Board™ is a compact add-on board that contains the coreless current sensor corresponding to the safety standards. This board features the CQ3300, a high-speed response coreless current sensor using a Hall sensor that outputs the analogue voltage proportional to the AC/DC from AKM Semiconductor. It employs a high sensitive InAs (Indium Arsenide) Hall element with the ability to detect both DC and AC with high accuracy and high speed. It has an ultra-fast high response of 0.5μsec, high galvanic isolation, and it is designed for the currents to range from -6.4A to +6.4A. This Click board™ is suitable for overcurrent applications and shows good performance in small-sized inverter applications.
The Heart Rate 2 Click Board™ is an add-on board based on MAXM86161 from Maxim Integrated a complete, integrated, optical data acquisition system, ideal for optical pulse oximetry and heart-rate detection applications. The optical readout has a low-noise signal conditioning analog front-end (AFE), including 19-bit ADC, an industry-lead ambient light cancellation (ALC) circuit, and a picket fence detect and replace algorithm. It also includes high-resolution optical readout signal processing channels with robust ambient light cancellation and high-current LED driver DACs to form a complete optical readout signal chain.
Heart Rate 2 Click board™ is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
Shuttle Click Board™ in combination with mikroBUS Shuttle provides an easy and elegant solution for stacking multiple Click Board™ boards™ on a single mikroBUS™.
Shuttle Click Board™ can be especially interesting for the IoT development systems that are equipped with a very small number of mikroBUS™ slots. Using Shuttle Click Board™ on such system will greatly improve its usability by adding more mikroBUS™ sockets, yet it will remain small, compact and manageable.
The Smart Home PIC32MZ Click Board™ Kit for AWS provides an AWS IoT development experience based entirely on the Mikroe Flip&Click Board™ for PIC32MZ development board. This kit will help you evaluate Amazon FreeRTOS and its services, learn how to develop IoT application and evaluate HVAC device functionality. What this kit also offers is mikroBUS™ compatibility with hundreds of other Click Board™ boards™ that can be used for customization of the existing application or making a new one. The board carries four different Click Board™ boards™, showcasing the power and the versatility of Mikroe rapid development solutions.
Each AWS Kit contains a complementary $10 Gift Voucher to get you started with your AWS Cloud journey!