Mixed-Signal Click Boards™

Products: 116 of 22
  • AD-SWIO Click Board™

    The AD-SWIO Click Board™ is a quad-channel software configurable input/output solution based on AD74412R. The AD74412R is a quad-channel software configurable input/output integrated circuit for building and process control applications. The device provides a fully integrated single chip solution for input and output operation. The AD-SWIO Click Board™ contains four 13-bit DACs, one per chanal, and 16-bit Σ-∆ ADC. These options give a lot of flexibility in choosing functionality for analog output, analog input, digital input, resistance temperature detector (RTD), and thermocouple measurements integrated into a single chip solution with a serial peripheral interface (SPI).

    Not rated yet
    • $62.46
    • Including 20% UK VAT*
  • ADAC Click Board™

    The AC Click Board™ an 8-channel 12-bit ADC, DAC and GPIO.

    The Click Board™ is designed to run on either 3.3V or 5V power supply. ADAC Click Board™ communicates with the target microcontroller over I2C interface, with additional functionality provided by the RST pin on the MikroBUS line.

    Not rated yet
    • $33.14
    • Including 20% UK VAT*
  • ADC 2 Click Board™

    If your design requires higher accuracy measurement than what a 12-bit Analog-to-Digital Converter (ADC) could provide, then considering ADC 2 Click Board™ would prove to be an ideal choice. ADC 2 Click Board™ incorporates the MCP3551 IC.

    Not rated yet
    • $30.59
    • Including 20% UK VAT*
  • ADC 3 Click Board™

    ADC3 Click Board™ carries Microchip™ MCP3428 16-bit multi-channel analog-to-digital converter. The Click Board™ has four pairs of screw terminals on-board, letting you access the chip™ four differential input channels.

    Not rated yet
    • $28.04
    • Including 20% UK VAT*
  • ADC 4 Click Board™

    The ADC 4 Click Board™ is an advanced analogue to digital multi-channel converter, which can sample inputs from 16 single-ended channels or 8 differential input channel pairs. This device has a quite high sampling resolution of 24 bits and the output data rates can range from 5 SPS to 250 kSPS. Besides the internal 2.5V reference voltage source, ADC 4 Click Board™ is also equipped with an external reference voltage circuit, which provides 4.096V. Finally, a custom reference voltage - up to 5V can be connected to the multiplexed inputs of the ADC converter. These options give a lot of flexibility in choosing the right reference voltage for any application.

    Not rated yet
    • $82.85
    • Including 20% UK VAT*
  • ADC 5 Click Board™

    The ADC 5 Click Board™ is a device used to sample an analog voltage on the input and convert it to a digital information. In general, ADC (analog to digital converters) are the most commonly used devices for converting the voltage signals into an information, which can be then processed in the digital domain. There are many types of ADC converters commercially available. They can vary in bit depth, sample rate, used approximation algorithm (SAR, delta-sigma..) and so on. Those attributes affect how accurately the sampled voltage will be translated into the digital world.

    Not rated yet
    • $22.94
    • Including 20% UK VAT*
  • ADC 6 Click Board™

    The ADC 6 Click Board™ is an advanced 24-bit multi-channel analog to digital converter (ADC), with 8 fully differential or 15 single ended/pseudo differential sampling inputs, and very flexible routing capabilities. The Click Board™ has two 2x10 pin headers, used both to configure the device and connect the input channels. This allows for unrestrained configuration of the device, so it can use both bipolar and unipolar input sources, with selectable reference voltages, external clock, auxiliary power switch, and more.

    Not rated yet
    • $36.96
    • Including 20% UK VAT*
  • ADC 7 Click Board™

    The ADC 7 Click Board™ is an advanced 32-bit analog to digital converter (ADC) which uses the LTC2500-32, a 32-bit oversampling SAR ADC with a configurable digital filter. The filter provides several presets (selectable via the hardware pin), as well as programming of the filtering parameters, via the industry-standard SPI interface. The LTC2500-32 has some very good specifications: a very low noise on the output, a high dynamic range of 148dB at 61 SPS (samples per second), 32-bit output with no missing codes, and more. An integrated filter allows relaxed anti-aliasing filter requirements for the analog input signal, which simplifies the design.

    Not rated yet
    • $126.19
    • Including 20% UK VAT*
  • ADC 8 Click Board™

    The ADC 8 Click Board™ Board is a high precision, low-power, 16-bit analog-to-digital converter (ADC), based around the ADS1115 IC. It is capable of sampling signals on four single-ended or two differential input channels. Although the ADS1115 cannot use an external reference, it incorporates a low-drift programmable voltage reference, along with the programmable gain amplifier (PGA). This allows for great flexibility in terms of the input signal level: it can sample signals from ±256 mV, up to 6.144 V, allowing a very high precision for a wide range of input signals, making it an excellent choice for various instrumentation applications.


    Not rated yet
    • $26.77
    • Including 20% UK VAT*
  • ADC 9 Click Board™

    The ADC 9 Click Board™ is 8th channel analog to digital converter expansion board, for projects where you have demand for multi channel ADC conversion such as microcontrollers with small number or none analog inputs. This Click board is based on MCP3564 a 24-bit Delta-Sigma Analog-to-Digital Converter with programmable data rate of up to 153.6 ksps from Microchip. It offers integrated features, such as internal oscillator, temperature sensor and burnout sensor detection, in order to reduce system component count and total solution cost. Ideal choice for precision dana acquisition systems, high resolution data converters, industrial control, battery-powered devices and many more.

    ADC 9 Click board™ is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $8.92
    • Including 20% UK VAT*
  • ADC Click Board™

    The ADC Click Board™ carries the MCP3204 12-bit Analog-to-Digital converter. The Click Board™ is designed to run on 3.3V by default. Place PWR SEL SMD jumper to 5V position if used with 5V systems. It communicates with the target microcontroller over SPI interface.>

    Not rated yet
    • $30.59
    • Including 20% UK VAT*
  • AN TO PWM 2 Click Board™

    The AN to PWM 2 Click Board™ is a compact add-on board that contains an easy-to-use component that converts the value of the input analog signal to a fixed frequency PWM voltage output, with a duty cycle proportional to the input voltage. This board features the LTC6992CS6, a silicon oscillator with an easy-to-use analog voltage-controlled pulse width modulation (PWM) capability from Analog Devices. It features the PWM signal controlled by analog input in range of -2.5V to 2.5V, frequency range up to 1 MHz, frequency error less than 1.7%, and it has good temperature stability. It has many features that make it well suited for heater control, PWM servo loops, LED dimming, signal isolation, and other duty cycle control applications.

    AN to PWM 2 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $30.59
    • Including 20% UK VAT*
  • AN To PWM Click Board™

    The AN to PWM Click Board™ is a device that converts the value of the input analog signal with virtually any wave shape to a fixed frequency PWM voltage output, with a duty cycle proportional to the input voltage. It has a linear response, and by applying a signal with the voltage between -2.5V to +2.5V on its input, the Click Board™ will generate a pulse width modulated (PWM) output voltage, with duty cycle ranging from 0% to 100%. AN to PWM Click Board™ features very good linearity, covers a positive and negative input voltage range and it has good temperature stability. These features allow this device to be used in various voltage to frequency applications, such as AD conversion, inspection, test and measurement equipment, while it can also be used as the variable clock signal generator.

    Not rated yet
    • $15.30
    • Including 20% UK VAT*
  • Analog MUX Click Board™

    The Analog MUX Click Board™switches one of the sixteen inputs to one output. It employs the CD74HC4067, a High-Speed CMOS Logic 16-Channel Analog Multiplexer/Demultiplexer, produced by Texas Instruments. It offers rail-to-rail operation, allowing the input signal to swing up (and down) to the voltage of the power supply, with no distortion. Features such as the low on-resistance and low input current leakage, fast and balanced propagation delay and transition times and break-before-make switching action make this circuit a perfect solution for various switching applications, analog and digital signals.

    Not rated yet
    • $12.75
    • Including 20% UK VAT*
  • DAC 2 Click Board™

    The DAC 2 Click Board™ is based on the LTC2601CDD, a 16-bit digital-to-analog converter, along with voltage output screw terminals. The chip has high rail-to-rail output drives (15mA, Min) and double-buffered data latches.

    Not rated yet
    • $24.22
    • Including 20% UK VAT*
  • DAC 3 Click Board™

    The DAC3 Click Board™ carries Microchip's MCP4726 IC, a 12-bit digital-to-analog converter, along with voltage output screw terminals. The digital value is converted to the appropriate voltage level in the range between GND and REFERENCE.


    .

    Not rated yet
    • $22.94
    • Including 20% UK VAT*
Products: 116 of 22

Bestsellers

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.