Gas Pressure Sensor Click Boards™

Products: 116 of 24
  • Altitude 2 Click Board™

    The Altitude 2 Click Board™ is a high-resolution barometric pressure sensor board. It provides very accurate measurements of temperature and atmospheric pressure, which can be used to calculate the altitude with a very high resolution of 20cm per step. Besides that, the device also includes features such as the ultra-low noise delta-sigma 24-bit ADC, low power consumption, fast conversion times, pre-programmed unique compensation values, and more. Low count of external components requirement, along with the simple interface which requires no extensive configuration programming, makes this sensor very attractive for building altitude or air pressure measuring applications.

    Not rated yet
    • $15.97
    • Including 20% UK VAT*
  • Altitude 3 Click Board™

    Altitude 3 Click Board™ allows high-resolution barometric pressure measurement, by utilizing the ICP-10100, an integrated barometric pressure and temperature sensor. Based on the advanced MEMS capacitive sensing technology, it offers an industry-level accuracy and thermal stability. A very high absolute pressure accuracy up to ±1 Pa allows Altitude 3 Click Board™ to sense very small altitude changes, within the magnitude of about 10 cm. The temperature sensor offers accuracy up to ±0.4°C, in the range from -40°C to 85°C. Low power requirements make it a perfect choice for various battery-operated applications

    Not rated yet
    • $15.97
    • Including 20% UK VAT*
  • Altitude 4 Click Board™

    The Altitude 4 Click Board™ introduces an absolute pressure sensor with digital output for low-cost applications labelled as NPA-201. Altitude 4 Click Board™ employs a MEMS pressure sensor with a signal-conditioning IC to provide accurate pressure measurements from 260 to 1260 mBar. Measurement values are provided at the digital output pins through an I2C interface. This sensor provides NPA-201 Digital Output Absolute Pressure Sensor provides low power consumption and compact size, making it ideal for battery-powered and mobile applications or any application where size is a constraint. In today’s growing market for portable electronics and wearables with multiple parameters being measured, many applications require an accurate measurement of barometric pressure to determine factors such as altitude. 

    Not rated yet
    • $12.77
    • Including 20% UK VAT*
  • Altitude Click Board™

    The Altitude Click Board™ from MikroE is an accessory board that enables the user to precisely measure altitude with 30cm resolution. The board employs a compact MPL3115A2 piezoresistive absolute pressure sensor that works with an embedded high-resolution 24-bit ADC to provide accurate pressure (Pascals)/altitude (metres) and temperature (°C) measurement. It features a wide operating range of 20 kPa to 110 kPa absolute pressure.

    Not rated yet
    • $15.44
    • Including 20% UK VAT*
  • Barometer 2 Click Board™

    The Barometer 2 Click Board™ is a digital barometer on a Click Board™. Barometer 2 is equipped with the LPS35HW, an absolute piezoresistive pressure sensor with ceramic, water resistant package, manufactured using a proprietary technology. This sensor offers many benefits, including low power consumption, high resolution of the pressure data, embedded thermal compensation, FIFO buffer with several operating modes, temperature measurement, etc. The most distinctive feature of this sensor is its ability to measure the pressure within the wide range between 260 - 1260hPa, offering calibrated readings over I2C digital interface. 

    Not rated yet
    • $15.97
    • Including 20% UK VAT*
  • Barometer 3 Click Board™

    The Barometer 3 Click Board™ is a compact add-on board for applications which require digital barometric air pressure measurement. This board features the DPS368, a digital barometric air pressure sensor from Infineon. It offers a high accuracy and a low current consumption, capable of measuring both pressure and temperature. The pressure sensor element is based on a capacitive sensing principle which guarantees high precision during temperature changes and due to its robustness it can be used in harsh environment. Its also ideally suited for wearable sensors (such as fitness tracking, step counting, fall detection), home appliances (for air flow control in HVAC, water level detection, intruder detection) and health care (for fall detection, air flow monitoring, smart inhalers).

    Barometer 3 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $8.52
    • Including 20% UK VAT*
  • Barometer Click Board™

    The Barometer Click Board™ from MikroE is a high precision measurement add-on board that features the LPS25HB IC. The LPS25HB chip is a highly sensitive piezoresistive absolute pressure sensor that is capable of detecting as little as 0.01 hPa RMS in high resolution mode. The measurement range is from 260 to 1260 hPa with a 24-bit digital output. Barometer Click Board™ can use either MikroBUS SPI or I2C communication interface, which is specified by soldering on-board jumpers in appropriate position. It also has a multifunctional interrupt pin that can be configured in either of the two ways: as Data Ready or as threshold trigger. Barometer Click Board™ is designed to use a 3.3V power supply only.

    This board is highly suitable for adding barometer or altimeter functionality to any design, for example, altitude measurement for wearables, weather station equipment, enhancing GPS functionality, etc.

    Not rated yet
    • $15.97
    • Including 20% UK VAT*
  • Diff Press Click Board™

    The Diff Press Click Board™ is an accurate pressure sensor Click Board™ capable of measuring differential pressure. This Click Board™ utilizes a very precise differential pressure sensor from NXP, labeled as MPXV7007DP. This piezo-resistive transducer is an advanced monolithic pressure sensor, combining advanced MEMS manufacturing technologies with on-chip signal processing, providing accurate measurement with very low drift over temperature. The sensor outputs an analog voltage, linearly dependent on the applied pressure. This voltage is digitized by an accurate A/D converter and delivered over the I2C interface.

    Not rated yet
    • $28.74
    • Including 20% UK VAT*
  • Diff Pressure Click Board™

    The Diff Pressure Click Board™ carries NXP's MPXV5010DP signal conditioned, temperature compensated and calibrated pressure sensor with two axial ports to accommodate industrial grade tubing. The Click Board™ is designed to run either on 3.3V or 5V power supply. It communicates with the target microcontroller over SPI interface (CS, SCK, MISO).

    Not rated yet
    • $62.81
    • Including 20% UK VAT*
  • PHT Click Board™
    • New!

    PHT Click Board™

    The PHT Click Board™ is a compact add-on board that contains a PHT combo sensor. This board features the MS8607, a digital combination sensor providing 3 environmental measurements all-in-one: pressure, humidity, and temperature from TE Connectivity Measurement Specialties. This sensor is based on leading MEMS technologies, provides factory-calibrated PHT data available over an I2C serial interface. The standout feature of the MS8607, alongside its very respectable low power consumption at as low as 0.78 µA, is also ultra-low power consumption and high PHT accuracy. This Click board™ is appropriate for environmental monitoring, as well as PHT applications such as HVAC and weather stations.

    PHT Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $16.63
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 5 days
  • Pressure 10 Click Board™

    The Pressure 10 Click Board™ features a digital interface barometric pressure sensor, based on piezoresistive bridge, labeled as HSPPAD042A, from ALPS Electric. It can use both SPI and I2C communication protocols, allowing it to be interfaced with a broad range of MCUs. Besides the pressure readings, this Click Board™ also offers very accurate temperature reading, which is required for the pressure readings compensation and can be used in a wide range of battery-powered and portable applications thanks to its very low power consumption. 

    In addition, this product supports averaging and filtering for lower noise, and FIFO function. All these features make the Pressure 10 Click Board™ an ideal solution for the development of portable weather station applications, indoor navigation, altitude control for drones, and similar applications that rely on barometric pressure measurements.

    Not rated yet
    • $12.77
    • Including 20% UK VAT*
  • Pressure 11 Click Board™

    The Pressure 11 Click Board™ is a digital barometer on a Click Board™. Pressure 11 is equipped with the LPS33HW, an absolute piezoresistive pressure sensor, manufactured using a proprietary technology. This sensor offers many benefits, including low power consumption, high resolution of the pressure data, embedded thermal compensation, FIFO buffer with several operating modes, temperature measurement, etc. 

    The most distinctive feature of this sensor is its ability to measure the pressure within the wide range between 260 - 1260hPa, offering calibrated readings over the SPI or I2C digital interface.

    Not rated yet
    • $25.55
    • Including 20% UK VAT*
  • Pressure 12 Click Board™

    The Pressure 12 Click Board™ is a barometric pressure gauge measuring Click Board™, equipped with the Amplified Basic Pressure sensor series (ABP), which features a ratio-metric analog output, which is proportional to the applied pressure. It features a very low Total Error Band of 1.5% of FS, a specification used to describe all the measurement errors and deviations within the sensor itself. The ABP series sensor uses a calibrated and thermally compensated ASIC, providing a ratio-metric output updated at a frequency of 1kHz. It can be directly used by the A/D conversion section of the host MCU, but it can also be directly used in a control feedback loop, for low latency operations.

    Not rated yet
    • $30.87
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 5 days
  • Pressure 13 Click Board™

    The Pressure 13 Click Board™ is a compact add-on board that contains an integrated pressure sensor for manifold air pressure measurement applications. This board features the KP229E2701, a miniaturized analog manifold air pressure sensor based on a capacitive principle from Infineon. This sensor converts the pressure of 10 kPa to 300 kPa into an analog output signal, a voltage range of 0.40 V to 4.65 V. Also, the manifold pressure data can be used to compute diagnostics of leakages and malfunctions of the exhaust gas recirculation valve. The high accuracy and the high sensitivity of the KP229E2701 make this Click board™ a perfect choice for advanced automotive applications as well as in industrial and consumer applications.

    Pressure 13 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $12.77
    • Including 20% UK VAT*
  • Pressure 2 Click Board™

    The Pressure 2 Click Board™ carries MS5803, a high resolution MEMS pressure sensor that is both precise and robust. Its measurement range is from 0 to 14 bars.

    Not rated yet
    • $73.45
    • Including 20% UK VAT*
  • Pressure 3 Click Board™

    Pressure 3 Click Board™ is a mikroBUS add-on board that carries an Infineon DPS310 digital barometric pressure sensor. It has an operating range from 300 to 1200 hPa with a relative accuracy of 0.06 hPa and absolute accuracy of 1 hPa.

    Not rated yet
    • $21.29
    • Including 20% UK VAT*
Products: 116 of 24

Bestsellers

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.