Light Sensor Click Boards™

Products: 17 of 7
  • Light Mix-Sens Click Board™
    • New!

    Light Mix-Sens Click Board™

    The Light mix-sens Click Board™ is carrying TMD37253, an advanced proximity measurement, colour sense (RGBC+IR), and digital ambient light sensing (ALS) device. The TMD37253 slim module package has been designed to accommodate a “single hole” aperture approach that incorporates an IR LED and factory calibrated LED driver. 

    The proximity detection feature provides object detection (e.g., mobile device screen to the user’s ear) by photo-diode detection of reflected IR energy (sourced by the integrated LED). The ALS detection feature provides photopic light intensity data. The colour photo-diodes have UV and IR blocking filters and a dedicated data converters producing 16-bit data. This architecture allows applications to accurately measure ambient light which enables devices to calculate illuminance and colour temperature to control display backlight and chromaticity. 

    Not rated yet
    • $11.78
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 5 days
  • Spectral 2 Click Board™

    The Spectral 2 Click Board™ is a multispectral colour sensing device, which uses the state-of-the-art sensor IC for a very accurate colour sensing. The sensor on the Spectral 2 Click Board™ provides multi-spectral sensing in the visible range of wavelengths from approximately 430nm to 670nm with the full width at half maximum (FWHM) of 40nm. Spectral Click Board™ provides a direct reading of the six different colour components with the 16-bit precision, as well as the calibrated reading, that gives 32-bit float values with an 8-bit biased exponent and a 23bit fraction part, processed through the Spectral ID engine. The sensor also integrates two programmable LED channels with constant current drivers, useful for indication and for providing the backlight for the measured colour object.


    .

    Not rated yet
    • $34.03
    • Including 20% UK VAT*
  • Spectral 3 Click Board™

    The Spectral 3 Click Board™ is a multi-spectral sensing device, which uses the state-of-the-art sensor IC for a very accurate near-IR (NIR) sensing. The sensor on the Spectral 3 Click Board™ provides multi-spectral sensing in the NIR wavelengths from approximately 610nm to 860nm with the full width at half maximum (FWHM) of 20nm. Spectral 3 Click Board™ provides a direct reading of the six different channels with the 16-bit precision, as well as the calibrated reading, that gives 32-bit float values with an 8-bit biased exponent and a 23-bit fraction part, processed through the Spectral ID engine. The sensor also integrates two programmable LED channels with constant current drivers, useful for indication and for providing the backlight for the measured colour object.

    Not rated yet
    • $34.03
    • Including 20% UK VAT*
  • Spectral Click Board™

    The Spectral Click Board™ is a multi-spectral light sensing device, which uses the state-of-the-art sensor IC for a very accurate chromatic white colour sensing. Spectral Click Board™ provides a direct reading of the XYZ colour coordinates, consistent with the CIE 1931 2' Standard Observer colour coordinates. It provides mapping of the XYZ coordinates to the x, y (Y) coordinates of the two-dimensional colour gamut, and it scales them to the CIE 1976 u'v' coordinate system. This Click Board™ also provides accurate Correlated colour Temperature (CCT) measurements and colour point deviation from the black body curve for white light colour, in u'v' coordinate system. Additionally, Spectral Click Board™ features the Near-IR (NIR) wavelengths sensing channel, as well as two programmable LED channels with a constant current.

    Not rated yet
    • $34.03
    • Including 20% UK VAT*
  • Spectrometer Click Board™
    • New!

    Spectrometer Click Board™

    The Spectrometer Click Board™ Board™ features an 11-channel spectrometer for spectral identification and colour matching applications. The spectral response is defined in the wavelengths from approximately 350nm to 1000nm. Control and Spectral data access are implemented through a serial I²C interface with very a low power consumption. 6 channels can be processed in parallel by independent ADCs while the other channels are accessible via a multiplexer. 8 optical channels cover the visible spectrum, one channel can be used to measure near infrared light and one channel is a photodiode without filter (“clear”). 

    This Click Board™ also integrates a dedicated channel to detect 50Hz or 60Hz ambient light flicker. The flicker detection engine can also buffer data for calculating other flicker frequencies externally. The NIR channel in combination with the other VIS channel may provide information of surrounding ambient light conditions (light source detection). Spectrometer Click Board™ can be used for spectral measurement, reflective object colour detection, colour measurement, and as ambient light flicker detection. 

    Not rated yet
    • $31.41
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 5 days
  • UVB Click Board™

    The UVB Click Board™ is an ultraviolet sensing board based on GUVB-C31SM sensor from GenUV, capable of measuring UV index between 0 to 16. UVB Click supports integrated functions of ultraviolet light sensors such that can be easily configured and used in user applications. Overexposure to UVB radiation not only can cause sunburn but also some forms of skin cancer, so knowing amount of UVB light can be quite important and this Click board™ is perfect solution for that task. This board can be used for various application where measuring UV light is needed such as wearable devices, weather stations, bicycle navigation and many more.

    UVB Click board™ is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

    Not rated yet
    • $31.41
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 5 days
  • UVC Click Board™

    The UVC Click Board™ is an ultraviolet sensing board which complements UVC Light Click Board™ for a ultimate ultraviolet solution. The board is based on GUVC-T21GH ultraviolet sensor from GenUV, capable of measuring UVC spectrum in the range of 220nm up to 280nm and light intensity from 0mW/cm² up to 9.3mW/cm². 

    With high sensitivity and good solar blindness, it can be a perfect solution for monitoring sterilisation lamps used in ultraviolet germicidal irradiation (UVGI), a disinfection method that is becoming an essential tool in the battle against viruses and bacteria. 

    The UVC Click Board™ Board has two ways of reading UV sensor output, direct analog output value and digital output thanks to MCP3221 ADC converter. 

    Not rated yet
    • $58.89
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 5 days

Bestsellers

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.