Wireless Connectivity Click Boards™
-
3G SARA Click Board™
The 3G SARA Click Board™ is a versatile cellular network communication solution, featuring the compact 3.75G UMTS/HSPA SARA U-201 modem from u-blox. This module includes a full set of options for the cellular networking and communication, such as the network indication, full embedded TCP/UDP stack, HTTP and HTTPS transfer protocols, IPv4/IPv6 dual-stack support, antenna detection, jamming signal detection, and more. 3G SARA Click Board™ also features the HSPA data-rates of 7.2 Mb/s (downlink) and 5.76 Mb/s (uplink), as well as the ability to maintain the voice call during the data transfer (3G). Onboard 16bit audio CODEC IC adds high-quality voice communication capability.
-
3G-AA Click Board™ (for USA)
Out of Stock - Order Now, Ships within 5 days3G-AA Click Board™ is a versatile cellular network communication solution, featuring the compact 3G UMTS/HSPA Quectel UG95 module. This module features a full set of options for the cellular networking and communication, such as the network indication, embedded TCP/UDP stack, HTTP/HTTPS stack, full GSM/GPRS/EDGE implementation, UMTS/HSDPA/HSUPA protocol implementation and more.3G-EA Click Board™ features data-rates of 7.2 Mb/s (downlink) and 5.76 Mb/s (uplink) in HSPA mode. on-board 16-bit audio CODEC IC adds high-quality voice communication capability.
-
3G-EA Click Board™ (for EU and Australia)
3G-EA Click Board™ is a versatile cellular network communication solution, featuring the compact 3G UMTS/HSPA Quectel UG95 module. This module features a full set of options for the cellular networking and communication, such as the network indication, embedded TCP/UDP stack, HTTP/HTTPS stack, full GSM/GPRS/EDGE implementation, UMTS/HSDPA/HSUPA protocol implementation and more. 3G-EA Click Board™ features data-rates of 7.2 Mb/s (downlink) and 5.76 Mb/s (uplink) in HSPA mode. on-board 16-bit audio CODEC IC adds high-quality voice communication capability.
-
4G LTE-APJ Click Board™ (for Asia Pacific)
Out of Stock - Order Now, Ships within 5 daysThe 4G LTE-APJ Click Board™ is an LTE Cat 1 / UMTS multimode cellular network solution, featuring the compact LARA-R2 series modem from u-blox. This module supports up to three LTE bands and one UMTS band. It also features a full range of options for the high speed cellular networking and communication, such as the network indication, full embedded TCP/UDP stack, HTTP and HTTPS transfer protocols, IPv4/IPv6 dual-stack support, secondary antenna for the RX diversity, antenna detection, jamming signal detection, embedded TLS 1.2 protocol for the improved security and more. 4G LARA Click Board™ can achieve data rates up to 10.3 Mbps/5.2 Mbps (downlink/uplink).
-
4G LTE-AT&T Click Board™ (for North America)
Out of Stock - Order Now, Ships within 5 daysThe 4G LTE-AT&T Click Board™ is an LTE Cat 1 / UMTS multimode cellular network solution, featuring the compact LARA-R2 series modem from u-blox. This module supports up to four LTE bands and up to two UMTS bands. It also features a full range of options for the high speed cellular networking and communication, such as the network indication, full embedded TCP/UDP stack, HTTP and HTTPS transfer protocols, IPv4/IPv6 dual-stack support, secondary antenna for the RX diversity, antenna detection, jamming signal detection, embedded TLS 1.2 protocol for the improved security and more. 4G LARA Click Board™ can achieve data rates up to 10.3 Mbps/5.2 Mbps (downlink/uplink)
-
4G LTE-E Click Board™
If you need to add 4G cellular access to your project, then the 4G LTE Click Board™ is worth considering.
The 4G LTE Click Board™ is an LTE Cat 1 / 2G multimode cellular network solution, featuring the compact LARA-R2 series modem from u-blox. This module supports up to three LTE bands and GSM bands. It also features a full range of options for the high speed cellular networking and communication, such as the network indication, full embedded TCP/UDP stack, HTTP and HTTPS transfer protocols, IPv4/IPv6 dual-stack support, secondary antenna for the RX diversity, antenna detection, jamming signal detection, embedded TLS 1.2 protocol for the improved security and more. 4G LARA Click Board™ can achieve data rates up to 10.3 Mbps/5.2 Mbps (downlink/uplink).
-
4G LTE-NA Click Board™
Out of Stock - Order Now, Ships within 5 daysThe 4G LTE-NA Click Board™ carries the LARA-R204 multi-mode cellular module from u-blox. This version is designed for the North American market.
The board is designed to use 5V power supply. I/O voltage levels could be 3.3V or 5V. It communicates with the target microcontroller over UART interface, with additional functionality provided by the following pins on the MikroBUSline: AN, RST, CS, PWM, INT.
-
5G NB IoT Click Board™
The 5G NB IoT Click Board™ is based on Thales ENS22 NB-IoT Wireless Module platform that boosts highly efficient future 5G connectivity for the IoT. The 5G NB IoT Click Board™ combines single mode NB-IoT connectivity with extreme power efficiency, extended coverage range and advanced security features providing steadfast reliability for data only solutions. The module offers built-in internet services, protected by an enhanced security concept.
5G NB IoT Click Board™ is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click Board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
-
6LoWPAN C Click Board™
The 6LoWPAN C Click Board™ carries the CC2520 2.4GHz RF transceiver.
The Click Board™ is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided by the following pins on the MikroBUS line: PWM, INT, RST, AN.
-
6LoWPAN Clicker Board
The 6LoWPAN Clicker Board™ is a compact development board with a MikroBUS socket for Click Board™ connectivity. It carries Microchip's PIC32MX470F512H - 120 MHz/150 DMIPS, MIPS32 M4K core microcontroller. And CA-8210 2.4GHz ISM band transceiver.
-
6LoWPAN T Click Board™
The 6LoWPAN T Click Board™ carries the CC2520 2.4GHz RF transceiver.
The Click Board™ is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided by the following pins on the MikroBUS line: PWM, INT, RST, AN.
-
AM/FM Click Board™
Out of Stock - Order Now, Ships within 5 daysThe AM/FM Click Board™ is a RADIO RECEIVER Click Board™ that can be used to listen to music from the AM and FM radio bands. One of the advantages of this versatile FM broadcast stereo transmitter IC is that it is very easy to work with it, which makes it an ideal solution for using it in cellular phones, MP3 players, portable media players, wireless speakers, personal computers and any other applications, where the radio receiver is needed.
AM/FM Click Board™ is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click Board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
-
AnyNet 2G Click Board™
The AnyNet 2G Click Board™ is a cellular to AWS gateway device, which provides developers with the complete solution for various IoT applications, by using the AWS IoT and Cloud Storage services for the data storage, analyzing and processing.
This Click Board™ provides an easy and secure connection with the AWS over the air (OTA), by utilizing the equipped Quectel M95 module and Eseye ES4623 embedded SIM card, that can work with more than 235 cellular operators from all over the world. AnyNet 2G Click Board™ can be used as an AWS IoT button with almost no configuration.
AnyNet 2G Click Board™ comes supplied with the start-up package - free Activation through the AWS, unique ID number of the embedded SIM card and six-month cellular connectivity services of up to 5000 messages to the AWS cloud. With the AnyNet 2G Click Board™, users get the unique level of integration with the AWS IoT services.Note: Before the purchase of AnyNet 2G Click Board™, please contact Eseye and check for the coverage and support of embedded SIM cards from your local provider. Opening an AWS account and subscribing to Eseye marketplace is mandatory to work with this Click Board™.
-
AnyNet 3G-AA Click Board™ (for United States)
The AnyNet 3G-AA Click Board™ is a cellular to AWS gateway device, which provides developers with the complete solution for various IoT applications, by using the AWS IoT and Cloud Storage services for the data storage, analysing and processing. AnyNet click board™ provides a secure connection with the AWS over the air (OTA), by utilizing the Quectel UG95-AA 3G module, offering UMTS/HSPA coverage for the North American region, Eseye ES4623 embedded SIM card, that can work with all the major cellular operators within the NA region. The AnyNet 3G click can be used as an AWS IoT button with almost no configuration.
AnyNet 3G-AA click comes supplied with the start-up package - free activation through the AWS, unique ID number of the embedded SIM card and six-month cellular connectivity services of up to 5000 messages to the AWS cloud. With the AnyNet 3G click, users get the unique level of integration with the AWS IoT services.
Note: Before the purchasing the AnyNet 3G click, please contact Eseye and check for the coverage and support of embedded SIM cards from your local provider. Opening an AWS account and subscribing to Eseye marketplace is mandatory to work with this click board.The antenna is sold separately.
-
AnyNet 3G-EA Click Board™ (for EU and Australia)
The AnyNet 3G-EA Click Board™ is a cellular to AWS gateway device, which provides developers with the complete solution for various IoT applications, by using the AWS IoT and Cloud Storage services for the data storage, analysing and processing. AnyNet Click Board™ provides a secure connection with the AWS over the air (OTA), by utilising the Quectel UG95-EA 3G module, offering worldwide UMTS/HSPA and GSM/GPRS/EDGE coverage EseyeES4623 embedded SIM card, that can work with more than 235 cellular operators from all over the world. An Eseye embedded sim card can work with more than 235 cellular operators from all over the world. The AnyNet 3G Click Board™ can be used as an AWS IoT button with almost no configuration.
AnyNet 3G Click Board™ comes supplied with the start-up package - free Activation through the AWS, unique ID number of the embedded SIM card and six-month cellular connectivity services of up to 5000 messages to the AWS cloud. With the AnyNet 3G Click Board™, users get the unique level of integration with the AWS IoT services.Note: Before the purchase of AnyNet 3G Click Board™, please contact Eseye and check for the coverage and support of embedded SIM cards from your local provider. Opening an AWS account and subscribing to Eseye marketplace is mandatory to work with this Click Board™.
The antenna is sold separately.
-
BEE Click Board™
A new add-on board for communication, the MikroE BEE Click Board™ employs the Microchip MRF24J40MA 2.4 GHz IEEE 802.15.4 radio transceiver module. MRF24J40MA module includes integrated crystal, internal voltage regulator, matching circuitry and PCB antenna. It operates in the 2.4 GHz frequency band and is FCC, IC and ETSI compliant. BEE Click Board™ is an ideal solution for wireless networks, smart home and building automation, and other electronic applications that require wireless communication. The board is connected to the microcontroller through a SPI interface and is provided with a 3.3V power supply only. BEE Click Board™ supports ZigBee, MiWi, MiWi P2P and proprietary wireless networking protocols with data rates of 250 kbps (IEEE 802.15.4) and 625 kbps (Turbo mode).