Clock and Timing

Products: 110 of 10
  • PLL Click Board™

    The PLL Click Board™ is a frequency multiplier which uses the Phase-Locked Loop (PLL) techniques to provide a high-frequency clock output from a cheap, standard fundamental mode crystal oscillator. In addition to this, PLL Click Board™ also offers a choice between nine different multiplication factors, programmed via states of the two input pins. The output range of the PLL Click Board™ goes up to 160MHz.

    Not rated yet
    • $18.74
    • Including 20% UK VAT*
  • RTC 2 Click Board™

    Introduce real time clock (RTC) functionality to the design using the RTC 2 Click Board™. This add-on board features a low-power Maxim DS1307 serial real-time clock (RTC). It is a full binary-coded decimal (BCD) clock/calendar with programmable square-wave output signal. The board uses standard I2C interface for communication with the target host microcontroller. RTC2 Click Board™ has a 3V/230mA lithium battery that works as a backup power supply. The timekeeping function continues even when the power supply status is OFF. Real-Time Clock (RTC) counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap-year clock function with four year calendar. It is designed to operate a 5V power supply only. In order to function to a 3.3V system, the user can check go for RTC Click Board™.

    The RTC2 Click Board™ is an ideal option who applications involving real-time clocks, calendars, and programmed alarms.

    Not rated yet
    • $26.23
    • Including 20% UK VAT*
  • RTC 3 Click Board™

    RTC3 Click Board™ carries BQ32000, a real time clock with an integrated trickle charge circuit for automatic switchover to a backup power supply (the circuit maintains the backup charge with an on-board super capacitor).

    Not rated yet
    • $26.23
    • Including 20% UK VAT*
  • RTC 4 Click Board™

    MikroElektronika is here with a new RTC Click Board™! RTC 4 Click Board™ is a time measurement add-on board that incorporates DS2417 IC. The DS2417 is a real-time clock/calendar (RTC) with fully compatible 1-Wire MicroLAN interface. It also features a programmable interrupt output for system wakeup on a separate pin. It utilizes an on-chip oscillator that is connected to an external 32.768 kHz crystal. Being a 1-Wire device, it features a unique, factory-lasered 64-bit long ROM code that allows the user to use it in a MicroLAN network.

    It uses a backup energy source that maintains a charge with an on-board coin cell 1F supercapacitor. The real time clock has an accuracy of +/- 2 minutes per month at 25°C. RTC4 Click Board™ communicates with the target board MCU either through MikroBUS AN or PWM pin (here, GPI01, GPIO0), plus the INT pin, depending on the position of the on-board jumper.

    Not rated yet
    • $26.23
    • Including 20% UK VAT*
  • RTC 5 Click Board™

    The RTC5 Click Board™ carries MCP79510, a real-time clock/calendar with an SPI interface (mikroBUS MISO, MOSI, SCK and CS pins); along with a programmable interrupt for system output.



    Not rated yet
    • $26.23
    • Including 20% UK VAT*
  • RTC 6 Click Board™

    The RTC6 Click Board™ carries Microchip's MCP79410 Real-Time Clock/Calendar IC with built-in 64 bytes of battery-backed SRAM an additional 1 Kbit of EEPROM.

    Not rated yet
    • $26.23
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • RTC 7 Click Board™

    The RTC 7 Click Board™ is a real time clock module which has an extremely low power consumption, allowing it to be used with a single button cell battery or a super capacitor, for an extended period of time. The MAX31341B IC built on the RTC 7 click is able to output the time in the binary coded decimal (BCD) format. Integrated, factory calibrated XTAL operating at 32.768 kHz ensures a very low time deviation.

    However, the RTC 7 click has the on-board external, more precise crystal oscillator too. An advanced interrupt feature allows many different uses such as alarm function, countdown timer function, external event detection function, using an analog and the digital inputs and much more.

    Not rated yet
    • $21.23
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • RTC 8 Click Board™

    RTC 8 Click Board™

    Not rated yet
    • $22.48
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • RTC Click Board™

    The RTC Click Board™ is an accessory board designed to add time measuring functionality to the device. This Click Board™ has a PCF8583 serial real-time clock/calendar. The PCF8583 IC is a full binary-coded decimal (BCD) clock and calendar chip with 24- or 12-hour clock format with four-year calendar, based on a 2048-bit static CMOS RAM. For communication with the target board microcontroller, RTC Click uses the I2C interface. The board comes with an integrated 3V/230mA lithium battery that serves as a backup power supply. Even when the main power supply goes OFF, this backup power supply enables the device to function continuously. It is designed to use a 3.3V power supply, but can be used with 5V systems by soldering the PWR SEL SMD jumper to the 5V position.

    RTC Click is an ideal choice for applications that require real-time clocks, calendars and programmed alarms.

    Not rated yet
    • $20.98
    • Including 20% UK VAT*
  • Timer Click Board™

    Timer Click Board™ is a mikroBUS add-on board with Maxim's DS1682 total elapsed time recorder. The main feature of the IC is its elapsed time counter (ETC) used in conjunction with the ALARM pin.

    Not rated yet
    • $22.48
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now

Bestsellers

Coming soon

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.