Analog Interface Click Boards

Products: 17 of 7
  • Hall Current 2 Click Board™

    The Hall Current 2 Click Board™ is a very accurate current measurement Click Board™, which relies on the Hall effect. Its most distinctive feature is a very low series resistance of only 1.2mÃŽ©, making this device a nearly-perfect ampere meter. The maximum current which can be measured with the Hall current 2 ranges from -12A to +12A, with optimised precision. The measurement is thermally compensated and conditioned by the integrated sections of the hall sensor IC. The result is available via the I2C interface of the high precision, 12 bit AD converter, as well as in the analog form, from the analog pin of the microBUS, directly from the Hall effect current sensor IC. This Click Board™ does not require any current sensing resistors.

    Not rated yet
    • $22.58
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Hall Current 3 Click Board™

    The Hall Current 3 Click Board™ is a very accurate current measurement Click Board™, which utilises the Hall effect to provide a precise and reliable measurement of reasonably high current. Its most distinctive feature is a very low series resistance of only 0.7mÃŽ©, making this device a nearly-perfect ammeter. The maximum current which can be measured by the MLX91210 integrated Hall sensor IC goes up to ±30A, but in respect to the nominal current measurement rating of the sensor, the current measurement is limited to about ±10A. The measurement is thermally compensated and conditioned by the high-speed integrated analog front-end sections of the Hall sensor IC. The current measurement value can be obtained from the on board 12-bit A/D converter, via the I2C interface.

    Not rated yet
    • $23.83
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Hall Current 4 Click Board™

    The Hall Current 4 Click Board™ is designed to measure relatively high current by using the integrated ACS70331 sensor. The current sensor is based on the GMR elements for current measurement. The Hall Current 4 can be used for current measurement in the applications designed to follow a current, such as the applications for monitoring the current in battery chargers, or for the various kinds of system power supplies.

    Not rated yet
    • $22.58
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Hall Current 5 Click Board™

    The Hall Current 5 Click is a very accurate electric current measurement Click Board™ based on the ACS733 IC. This IC is a galvanically isolated current sensor, which utilizes the Hall-effect principle. Its most distinctive feature is its very low series resistance of only 1 mΩ, which makes this device a nearly-perfect ammeter. The maximum current which can be measured with Hall current 5 Click Board™ ranges from -20 A to +20 A, with the optimised precision. By using the latest manufacturing technologies, the ACS733 can be used on very high frequencies, making it a perfect solution for a wide range of applications.

    Not rated yet
    • $22.58
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Hall Current 6 Click Board™

    The Hall Current 6 Click Board™ is a very accurate current measurement Click board™, based on the ACS723 IC. This IC is a galvanically isolated current sensor, which utilises the Hall-effect principle. Its most distinctive feature is its very low series resistance of only 0.65 mΩ, which makes this device a nearly-perfect ammeter. The maximum current which can be measured with Hall Current 6 click ranges from -5 A to +5 A, with the optimised precision. It features a dedicated bandwidth selection pin, which allows better noise performance for a specific application.

    Not rated yet
    • $22.58
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Hall Current Click Board™

    The Hall Current Click Board™ is a measurement add-on board intended to measure the current utilizing the Hall Effect. The board features a high-precision galvanically isolated TLI4970-D050T4 magnetic digital current sensor in a tiny footprint. The Hall current Click Board™ is equipped with two EXTreme ZPower connectors (IP- and IP+) to connect a conducting wire. Split the conducting wire and connect the ends to the two connectors. The current rail is galvanically isolated from the interface to the microcontroller to keep the surrounding circuitry safe. The sensor detects the strength of the current, then sends the measurement data to the target MCU through MikroBUS SPI (SDO, SCK and CS) lines.

    Hall current Click Board™ is based on contact-free measurement principle, which causes no additional power loss and makes it perfectly suited for high efficiency systems. It is designed to use a 3.3V power supply only. The board is an ideal choice for photovoltaic and general purpose inverters, power supplies (SMPS), battery chargers, lighting applications, and electrical drives.

    Not rated yet
    • $42.65
    • Including 20% UK VAT*
  • Pot Click Board™

    The POT Click is a Click Board™ with the accurate selectable reference voltage output. By employing a high-quality 10mm carbon potentiometer, this Click Board™ can provide very accurate voltage output. POT 2 Click Board™ is also equipped with the SMD jumper, which allows the maximum reference voltage to be selected between two typically used values: 2.048V or 3.3V. The output is buffered with a rail-to-rail buffering operational amplifier, provides constant input and output impedance. The output current is limited by the protection circuit at the output, preventing damage if the output is shorted to GND.


    Not rated yet
    • $15.05
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now

Coming soon

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.