Mixed-Signal Click Boards

Products: 116 of 20
  • AD-SWIO Click Board™

    Not rated yet
    • $61.85
    • Including 20% UK VAT*
    Order Now
  • ADAC Click Board™

    The AC Click Board™ an 8-channel 12-bit ADC, DAC and GPIO.

    The Click Board™ is designed to run on either 3.3V or 5V power supply. ADAC Click Board™ communicates with the target microcontroller over I2C interface, with additional functionality provided by the RST pin on the MikroBUS line.

    Not rated yet
    • $32.82
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ADC 2 Click Board™

    If your design requires higher accuracy measurement than what a 12-bit Analog-to-Digital Converter (ADC) could provide, then considering ADC 2 Click Board™ would prove to be an ideal choice. ADC 2 Click Board™ incorporates the MCP3551 IC.

    Not rated yet
    • $30.30
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ADC 3 Click Board™

    ADC3 Click Board™ carries Microchip™ MCP3428 16-bit multi-channel analog-to-digital converter. The Click Board™ has four pairs of screw terminals on-board, letting you access the chip™ four differential input channels.

    Not rated yet
    • $27.77
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ADC 4 Click Board™

    The ADC 4 Click Board™ is an advanced analogue to digital multi-channel converter, which can sample inputs from 16 single-ended channels or 8 differential input channel pairs. This device has a quite high sampling resolution of 24 bits and the output data rates can range from 5 SPS to 250 kSPS. Besides the internal 2.5V reference voltage source, ADC 4 Click Board™ is also equipped with an external reference voltage circuit, which provides 4.096V. Finally, a custom reference voltage - up to 5V can be connected to the multiplexed inputs of the ADC converter. These options give a lot of flexibility in choosing the right reference voltage for any application.

    Not rated yet
    • $82.05
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ADC 5 Click Board™

    The ADC 5 Click Board™ is a device used to sample an analog voltage on the input and convert it to a digital information. In general, ADC (analog to digital converters) are the most commonly used devices for converting the voltage signals into an information, which can be then processed in the digital domain. There are many types of ADC converters commercially available. They can vary in bit depth, sample rate, used approximation algorithm (SAR, delta-sigma..) and so on. Those attributes affect how accurately the sampled voltage will be translated into the digital world.

    Not rated yet
    • $22.72
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ADC 6 Click Board™

    The ADC 6 Click Board™ is an advanced 24-bit multi-channel analog to digital converter (ADC), with 8 fully differential or 15 single ended/pseudo differential sampling inputs, and very flexible routing capabilities. The Click Board™ has two 2x10 pin headers, used both to configure the device and connect the input channels. This allows for unrestrained configuration of the device, so it can use both bipolar and unipolar input sources, with selectable reference voltages, external clock, auxiliary power switch, and more.

    Not rated yet
    • $36.61
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ADC 7 Click Board™

    The ADC 7 Click is an advanced 32-bit analog to digital converter (ADC) which uses the LTC2500-32, a 32-bit oversampling SAR ADC with a configurable digital filter. The filter provides several presets (selectable via the hardware pin), as well as programming of the filtering parameters, via the industry-standard SPI interface. The LTC2500-32 has some very good specifications: a very low noise on the output, a high dynamic range of 148dB at 61 SPS (samples per second), 32-bit output with no missing codes, and more. An integrated filter allows relaxed anti-aliasing filter requirements for the analog input signal, which simplifies the design.

    Not rated yet
    • $124.97
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ADC 8 Click Board™

    The ADC 8 Click Board is a high precision, low-power, 16-bit analog-to-digital converter (ADC), based around the ADS1115 IC. It is capable of sampling signals on four single-ended or two differential input channels. Although the ADS1115 cannot use an external reference, it incorporates a low-drift programmable voltage reference, along with the programmable gain amplifier (PGA). This allows for great flexibility in terms of the input signal level: it can sample signals from ±256 mV, up to 6.144 V, allowing a very high precision for a wide range of input signals, making it an excellent choice for various instrumentation applications.


    Not rated yet
    • $26.51
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ADC 9 Click Board™

    Not rated yet
    • $8.84
    • Including 20% UK VAT*
    Order Now
  • ADC Click Board™

    The ADC Click Board™ carries the MCP3204 12-bit Analog-to-Digital converter. The Click Board™ is designed to run on 3.3V by default. Place PWR SEL SMD jumper to 5V position if used with 5V systems. It communicates with the target microcontroller over SPI interface.>

    Not rated yet
    • $30.30
    • Including 20% UK VAT*
  • AN To PWM Click Board™

    Not rated yet
    • $15.15
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Analog MUX Click Board™

    Not rated yet
    • $12.62
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • DAC 2 Click Board™

    The DAC 2 Click Board™ is based on the LTC2601CDD, a 16-bit digital-to-analog converter, along with voltage output screw terminals. The chip has high rail-to-rail output drives (15mA, Min) and double-buffered data latches.

    Not rated yet
    • $23.98
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • DAC 3 Click Board™

    The DAC3 Click Board™ carries Microchip's MCP4726 IC, a 12-bit digital-to-analog converter, along with voltage output screw terminals. The digital value is converted to the appropriate voltage level in the range between GND and REFERENCE.


    .

    Not rated yet
    • $22.72
    • Including 20% UK VAT*
  • DAC 4 Click Board™

    DAC 4 Click Board™

    Not rated yet
    • $15.15
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
Products: 116 of 20

Bestsellers

Coming soon

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.