Power Management Click Boards

Click Boardâ„¢s based on power supply control devices.

Products: 116 of 59
  • 3xBuck Click Board™

    The 3xBuck Click Board™ is a triple step-down (buck) converter Click Board™. It features three independent output terminals that can provide 1.8V, 3.3V, and 5V with the combined current output up to 3A. This specific selection of output voltages makes this Click Board™ a perfect choice for an embedded application power supply, as these voltages are the most commonly used values. The voltage at each output can be switched to a programmable internal voltage divider, in cases when the output voltage fine-tuning is required. This can be done over the industry-standard I2C interface.

    Not rated yet
    • $44.18
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Balancer 2 Click Board™

    Not rated yet
    • $18.93
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Balancer 3 Click Board™

    Balancer 3 Click Board™

    Not rated yet
    • $12.12
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Balancer 5 Click Board™

    Balancer 5 Click Board™

    Not rated yet
    • $18.93
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • BATT-MAN Click Board™

    The BATT-MAN Click Board™ is a very versatile battery operated power manager. When powered via mikroBUS, it will charge the connected Li-Ion/Li-Po 3.7V battery, while providing the output voltage on all its outputs at the same time. The interesting feature of this device is that it can provide additional current to the connected load if the current provided from the mikroBUS socket is not enough. This is possible by utilizing the connected battery and by employing intelligent power routing algorithms of BATT-MAN Click Board™.

    Not rated yet
    • $34.08
    • Including 20% UK VAT*
  • BATT-MON Click Board™

    The BATT-MON Click Board™ is a very versatile, high accuracy, multiple-chemistry battery gauge for applications single-cell batteries. It can be used for various applications, ranging from smartphones, notebook / laptops, power tools, vacuums, to energy storage systems (ESS), while providing the output voltage at the same time. The interesting feature of this device is that it can provide additional current to the connected load if the current provided from the mikroBUS™ socket is not enough. This is possible by utilizing the connected battery and by employing intelligent power routing algorithms of BATT-MON Click Board™.

    Not rated yet
    • $16.41
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Boost 2 Click Board™

    The BOOST 2 Click Board™ is a DC-DC step-up (boost) regulator that has a fixed 5V output, which can be obtained from any low voltage input - such as NiCd, NiMH or one cell Li-Po/Li-Ion batteries. This Click Board™ features very high efficiency, low noise and anti-ringing voltage output and inrush current limiting with the internal soft-start, as well as true disconnect option for minimized power drain, when in shutdown mode.

    Not rated yet
    • $18.93
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Boost 4 Click Board™

    The Boost 4 Click Board™ carries the TPS61230A, a high efficiency fully integrated synchronous boost converter from Texas Instruments. The Click Board™ is designed to run on a 3.3V power supply.

    Boost 4 Click Board™ drives the target chip through the digi pot, which has SPI communication with the microcontroller on the system.

    Not rated yet
    • $21.46
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Boost 6 Click Board™

    Boost 6 Click Board™

    Not rated yet
    • $18.93
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Boost Click Board™

    Use our new boost converter to step up the voltage in your next project.

    The Boost Click Board™ is based on Microchip's MIC2606, a 2MHz, PWM DC/DC boost switching regulator available in a 2mm x 2mm MLF' package.

    Boost Click Board™ provides an adjustable output voltage through the on-board DAC that drives the FB pin of the MIC2606 to set desired output voltage. The Click Board™ also has an on-board ADC that converts output voltage and sends its digital value through SPI pins of mikroBUS to the microcontroller.

    Not rated yet
    • $26.51
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Boost-INV 2 Click Board™

    The Boost-INV 2 Click Board™ is a very useful DC/DC voltage converter device, as can output both positive and negative voltage, boosted up to 15V and inverted to -15V, from a single fixed voltage input. The input voltage can vary between 2.7V to 5.5V, making the Boost-INV 2 Click Board™ an ideal solution for powering devices with complex, split-rail power supply demands, using only a common battery. The Click Board™ is equipped with two additional D/A converters, which make it possible to digitally set the output voltage, via the SPI.

    Not rated yet
    • $36.61
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Boost-INV Click Board™

    The Boost-INV Click Board™ is a very useful DC/DC voltage converter device, as can output both positive and negative voltage, boosted up to 12.78V and -13.95, from a single fixed voltage input. The input voltage can vary between 2.55V to 5.5V, making the Boost-INV Click Board™ an ideal solution for powering devices with complex, split-rail power supply demands, using only a common battery. A special feature of the LT3582 integrated DC/DC converter is the presence of the I2C interface, which is uncommon for devices of this type: it allows configuring of the output voltages, power sequencing, and output voltage ramp rates. It has an OTP memory also, which can be used to store the power-on default values.

    Not rated yet
    • $26.51
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Buck 10 Click Board™

    Buck 10 Click Board™

    Not rated yet
    • $18.93
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Buck 11 Click Board™

    The Buck 11 Click Board™ is a high-efficiency step-down converter which provides 3.3V on its output, derived from the connected power supply voltage, in the range from 4.2V to 60V. Buck 11 click is based on the LMR36015, a highly efficient DC-DC step-down converter. In addition, the Buck 11 click offers monitoring the stability of the output voltage by employing an additional A/D converter circuit. Due to its high efficiency, LMR36015 allows the Click board™ to easily deliver up to 1.5A of current. The efficiency for lighter loads is optimized by using the PFM mode. It features a Hot Rod™ package which enables a low noise performance, high efficiency, and very compact size.

    Not rated yet
    • $26.51
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Buck 12 Click Board™

    Buck 12 Click Board™

    Not rated yet
    • $26.51
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Buck 13 Click Board™

    Buck 13 Click Board™

    Not rated yet
    • $36.61
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
Products: 116 of 59

Bestsellers

Coming soon

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.