Sensors

Products: 116 of 21
  • AC Current Click Board™

    The AC Current Click Board™ can measure alternating currents up to 30A. It features the MCP3201 ADC (analog to digital) converter and the MCP607 CMOS Op Amp, both from Microchip. The Click Board™ is designed to run on either 3.3V or 5V power supply. It communicates with the target MCU over an SPI interface, and the AN pin on the MikroBUS™ interface.

    AC Current Click Board™ can only be used for sensors with voltage output (30A input current).

    Not rated yet
    • $17.46
    • Including 20% UK VAT*
  • AC Current Click Board™ - bundle

    With AC Current Clixck Board bundle (AC Current Click Board™ + AC Current Sensor) you will be able to measure alternating currents up to 30A. The Click Board™ is designed to run on either 3.3V or 5V power supply. It communicates with the target MCU over an SPI interface, and the AN pin on the MikroBUSline.

    Not rated yet
    • $36.16
    • Including 20% UK VAT*
    Only 2 left in stock. Order Now
  • Ambient 11 Click Board™

    Not rated yet
    • $11.22
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Ambient 2 Click Board™

    The Ambient 2 Click Board™ carries TI's OPT3001 Ambient Light sensor. It's a small (2mm x 2mm) single-chip lux meter that measures only the visible part of the light spectrum from any kind of source (mimicking the way humans see light).

    Not rated yet
    • $17.46
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Ambient 3 Click Board™

    Ambient 3 Click Board™

    Not rated yet
    • $31.17
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Ambient 4 Click Board™

    The Ambient 4 Click Board™ is a light intensity-sensing and measuring Click Board™, which features an accurate, light-intensity sensor labelled as BH1721FVC, made by ROHM Corporation. It offers a high measurement accuracy in the range between 1x to 1.35x of the actual light intensity. The spectral response of the sensor is calibrated to closely match the spectral response of the human eye. Thanks to its high level of integration, the sensor requires a minimal number of external components, allowing the Click Board™ to incorporate an additional level translating IC, ensuring a reliable data transfer over the industry-standard I2C interface.

    Not rated yet
    • $19.95
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Ambient 5 Click Board™

    The Ambient 5 Click Board™ can sense the intensity of the ambient light, providing measurement data in a digital format, over the I2C interface. It utilises the VEML6030, a miniature ambient light sensor (ALS) which occupies only 2x2 mm of space. Packed in a small transparent casing, this sensor offers a lot of features. Thanks to its 16-bit dynamic range, it can be used in very dim, but also in very bright lighting conditions. A Filtron technology provides spectral response close to a real human eye. The flicker noise rejection algorithm improves accuracy, while excellent thermal compensation ensures consistent readings.

    Not rated yet
    • $13.71
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Ambient 6 Click Board™

    The Ambient 6 Click Board™ can sense the intensity of the ambient light, providing the measurement data in digital format over the I2C interface. It utilises the VEML7700, a miniature ambient light sensor (ALS) with I2C interface. Packed in a small transparent casing, this sensor can provide very accurate readings: thanks to a 16-bit dynamic range, it can be used in very dim and very bright lighting conditions. A well-proven Filtron™ technology allows response close to a real human eye, while the O-Trim™ technology allows for ALS tolerance less than 10%. The flicker noise rejection algorithm further improves accuracy, while excellent thermal compensation ensures consistency of the measurement results.

    Not rated yet
    • $11.22
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Ambient 7 Click Board™

    Ambient 7 Click Board™

    Not rated yet
    • $11.22
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Ambient 8 Click Board™

    The Ambient 8 Click Board™ is equipped with the ambient light sensor (ALS) IC, providing measurements of the ambient light intensity in a digital format. It utilises the LTR-329ALS-01, an ALS with the I2C interface. Packed in a small transparent ChipLED package, this sensor can provide very accurate readings: thanks to a 16-bit and resolution and high dynamic range, it can be used in both very dim and very bright lighting conditions: it can cover the range from 0.01 lux to 64 klux. It has an excellent IR filtering and two photo-sensing elements, allowing linear response over the whole range. The flicker noise rejection algorithm further improves accuracy, while excellent thermal compensation ensures consistency of the measurement results.

    Not rated yet
    • $11.22
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Ambient Click Board™

    The Ambient Click Board™ is based on the Melexis MLX75305 IC. It's a CMOS integrated optical sensor that consists of a photodiode, a transimpedance amplifier, and an output transistor.

    Not rated yet
    • $11.22
    • Including 20% UK VAT*
  • Ammeter Click Board™

    Ammeter Click Board™ is a mikroBUS add-on board with circuitry for measuring electric current (both AC and DC).


    Not rated yet
    • $29.92
    • Including 20% UK VAT*
  • Breathalyzer Click Board™ Pack

    Based on the Flip & Click Board™ demo from Maker Faire Rome, the Breathalyser Click Pack from Mikroelektronika comprises a combo of gas sensors ,

    Not rated yet
    • $60.84
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Environment Click Board™

    The Environment Click Board™ measures temperature, relative humidity, pressure and VOC (Volatile Organic compounds gases).

    The Click Board™ is based on the Bosch BME680 environmental sensor from Bosch. Environment Click Board™ is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI or I2C interface.

    You can use it to test your indoor air quality, to control HVAC (heating, ventilation, and air conditioning) systems, in a weather station, sports applications and more.

    Not rated yet
    • $42.39
    • Including 20% UK VAT*
  • Illuminance Click Board™

    The Illuminance Click Board™ from MikroE is a light sensor designed for better detection of ambient lighting over conventional light sensors that are too sensitive to infrared light. The board features an on-board TSL2561, a light-to-digital converter, which transforms light intensity to a digital signal output. The TSL2561 sensor uses two separate photodiodes: One is sensitive to the full-spectrum of light, the other to infrared light only. Using a formula, the user gets a sensor reading then approximates light response of the human eye. Illuminance Click Board™ communicates with your target microcontroller via MikroBUS I2C lines: SCL (clock) and SDA (data). The zero-ohm J1 jumper allows the user to select between three available I2C address.

    The Illuminance Click finds application in auto-brightness regulators on OLED or LCD displays, or any other kind of automatic ambient light regulation. It is designed to use a 3.3V power supply only.

    Not rated yet
    • $19.95
    • Including 20% UK VAT*
  • Manometer 2 Click Board™

    The Manometer 2 Click Board™ is based on the MS5525DSO-SB001GS digital pressure sensor, based on leading MEMS technology. The Click Board™ is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C or SPI interface.

    Not rated yet
    • $48.63
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
Products: 116 of 21

Bestsellers

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.