Gas Pressure

Products: 116 of 20
  • Altitude 2 Click Board™

    The Altitude 2 Click Board™ is a high-resolution barometric pressure sensor board. It provides very accurate measurements of temperature and atmospheric pressure, which can be used to calculate the altitude with a very high resolution of 20cm per step. Besides that, the device also includes features such as the ultra-low noise delta-sigma 24-bit ADC, low power consumption, fast conversion times, pre-programmed unique compensation values, and more. Low count of external components requirement, along with the simple interface which requires no extensive configuration programming, makes this sensor very attractive for building altitude or air pressure measuring applications.

    Not rated yet
    • $18.93
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Altitude 3 Click Board™

    Altitude 3 Click Board™ allows high-resolution barometric pressure measurement, by utilizing the ICP-10100, an integrated barometric pressure and temperature sensor. Based on the advanced MEMS capacitive sensing technology, it offers an industry-level accuracy and thermal stability. A very high absolute pressure accuracy up to ±1 Pa allows Altitude 3 Click Board™ to sense very small altitude changes, within the magnitude of about 10 cm. The temperature sensor offers accuracy up to ±0.4°C, in the range from -40°C to 85°C. Low power requirements make it a perfect choice for various battery-operated applications

    Not rated yet
    • $18.93
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Altitude 4 Click Board™

    Not rated yet
    • $15.15
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Altitude Click Board™

    The Altitude Click Board™ from MikroE is an accessory board that enables the user to precisely measure altitude with 30cm resolution. The board employs a compact MPL3115A2 piezoresistive absolute pressure sensor that works with an embedded high-resolution 24-bit ADC to provide accurate pressure (Pascals)/altitude (metres) and temperature (°C) measurement. It features a wide operating range of 20 kPa to 110 kPa absolute pressure.

    Not rated yet
    • $18.30
    • Including 20% UK VAT*
  • Barometer 2 Click Board™

    Barometer 2 Click Board™

    Not rated yet
    • $18.93
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Barometer Click Board™

    The Barometer Click Board™ from MikroE is a high precision measurement add-on board that features the LPS25HB IC. The LPS25HB chip is a highly sensitive piezoresistive absolute pressure sensor that is capable of detecting as little as 0.01 hPa RMS in high resolution mode. The measurement range is from 260 to 1260 hPa with a 24-bit digital output. Barometer Click Board™ can use either MikroBUS SPI or I2C communication interface, which is specified by soldering on-board jumpers in appropriate position. It also has a multifunctional interrupt pin that can be configured in either of the two ways: as Data Ready or as threshold trigger. Barometer Click Board™ is designed to use a 3.3V power supply only.

    This board is highly suitable for adding barometer or altimeter functionality to any design, for example, altitude measurement for wearables, weather station equipment, enhancing GPS functionality, etc.

    Not rated yet
    • $18.93
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Diff Press Click Board™

    The Diff Press Click Board is an accurate pressure sensor Click board™ capable of measuring differential pressure. This Click board™ utilizes a very precise differential pressure sensor from NXP, labeled as MPXV7007DP. This piezo-resistive transducer is an advanced monolithic pressure sensor, combining advanced MEMS manufacturing technologies with on-chip signal processing, providing accurate measurement with very low drift over temperature. The sensor outputs an analog voltage, linearly dependent on the applied pressure. This voltage is digitized by an accurate A/D converter and delivered over the I2C interface.

    Not rated yet
    • $34.08
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Diff Pressure Click Board™

    The Diff Pressure Click Board™ carries NXP's MPXV5010DP signal conditioned, temperature compensated and calibrated pressure sensor with two axial ports to accommodate industrial grade tubing. The Click Board™ is designed to run either on 3.3V or 5V power supply. It communicates with the target microcontroller over SPI interface (CS, SCK, MISO).

    Not rated yet
    • $74.48
    • Including 20% UK VAT*
  • Pressure 10 Click Board™
    • New!

    Pressure 10 Click Board™

    Not rated yet
    • $15.15
    • Including 20% UK VAT*
    Order Now
  • Pressure 11 Click Board™

    The Pressure 11 Click Board™ is a digital barometer on a Click Board™. Pressure 11 is equipped with the LPS33HW, an absolute piezoresistive pressure sensor, manufactured using a proprietary technology. This sensor offers many benefits, including low power consumption, high resolution of the pressure data, embedded thermal compensation, FIFO buffer with several operating modes, temperature measurement, etc. 

    The most distinctive feature of this sensor is its ability to measure the pressure within the wide range between 260 - 1260hPa, offering calibrated readings over the SPI or I2C digital interface.

    Not rated yet
    • $30.30
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Pressure 12 Click Board™

    The Pressure 12 Click Board™ is a barometric pressure gauge measuring Click board™, equipped with the Amplified Basic Pressure sensor series (ABP), which features a ratio-metric analog output, which is proportional to the applied pressure. It features a very low Total Error Band of 1.5% of FS, a specification used to describe all the measurement errors and deviations within the sensor itself. The ABP series sensor uses a calibrated and thermally compensated ASIC, providing a ratio-metric output updated at a frequency of 1kHz. It can be directly used by the A/D conversion section of the host MCU, but it can also be directly used in a control feedback loop, for low latency operations.

    Not rated yet
    • $36.61
    • Including 20% UK VAT*
    Order Now
  • Pressure 2 Click Board™

    The Pressure 2 Click Board™ carries MS5803, a high resolution MEMS pressure sensor that is both precise and robust. Its measurement range is from 0 to 14 bars.

    Not rated yet
    • $87.10
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Pressure 3 Click Board™

    Pressure 3 Click Board™ is a mikroBUS add-on board that carries an Infineon DPS310 digital barometric pressure sensor. It has an operating range from 300 to 1200 hPa with a relative accuracy of 0.06 hPa and absolute accuracy of 1 hPa.

    Not rated yet
    • $25.25
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Pressure 4 Click Board™

    The Pressure 4 Click Board™ is an absolute barometric pressure measurement board, which features a low power consumption, high precision barometric pressure sensor. Capable of using both SPI and I2C communication protocols, Pressure 4 Click Board™ allows being interfaced with a broad range of various microcontroller units (MCUs). The sensor used on this Click Board™ features on-board processing capabilities, such as the IIR filtering, used to filter out abrupt changes of pressure. Low power consumption allows Pressure 4 Click Board™ to be used in many portable, battery-powered applications. Besides the pressure, it can also measure the ambient temperature, which can be used for the compensation calculations.

    Not rated yet
    • $22.72
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Pressure 5 Click Board™

    Pressure 5 Click Board™

    Not rated yet
    • $17.67
    • Including 20% UK VAT*
    Order Now
  • Pressure 6 Click Board™

    Pressure 6 Click features a simple, yet highly accurate and reliable pressure sensor labelled as BM1386GLV, produced by ROHM. This sensor is a piezo-resistive pressure sensor with internal thermal compensation, which greatly simplifies the pressure reading. Pressure 6 Click Board™ allows readings in the range from 300hPa up to 1300hPa, with the accuracy of ±0.12hPa. The Click Board™ comes as a fully tested and approved prototype, making it a reliable device ready to use on the development board. The full package also includes the mikroSDK software and a library with all the functions.

    The Click Board™ is perfect to use for developing the industry-related applications, as well as in the healthcare applications, mobile devices, smartphone apps, and similar.

    Not rated yet
    • $22.72
    • Including 20% UK VAT*
    Order Now
Products: 116 of 20

Bestsellers

Coming soon

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.