Medical Sensors

Products: 116 of 21
  • ECG 2 Click Board™

    Track the patterns of your beating heart with the ECG 2 Click Board™ . ECG 2 Click Board™ contains ADS1194 16-bit delta-sigma analog-to-digital converters from Texas Instruments, a built-in programmable gain amplifier (PGA), an internal reference, and an on-board oscillator.

    The Click Board™ communicates with the target MCU over SPI and the following MikroBUS pins: PWM, AN and INT. ECG 2 Click Board™ runs on 3.3V and 5V power supply.

    Not rated yet
    • $61.07
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ECG 2 Click Board™ bundle

    The ECG 2 Click Bundle (the Click Board™ + cable + electrodes) has what you need to start recording your ECG.

    Prototype your own health-tracking and fitness devices, find out how healthy your heart is or just make an LED blink in sync with your heart.

    Not rated yet
    • $98.46
    • Including 20% UK VAT*
    Order Now
  • ECG 3 Click Board™

    The ECG 3 Click Board™ is a complete solution for ECG and HR application development, utilizing a specialised IC with a clinical-grade analog front-end (AFE). ECG 3 Click Board™ uses the MAX30003 IC, an ultra-low power, single-channel bio-sensor, which features a wide range of different options, making it an ideal solution for development of heart rate and ECG monitoring applications, fitness applications, for the ECG bio-authentication, and similar applications related to heart monitoring. ECG 3 Click Board™ is also equipped with the 3.5mm electrodes connector, making it ready to be used out of the box.

    Not rated yet
    • $56.08
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ECG 4 Click Board™

    ECG 4 Click is a complete solution for the development of ECG and Heart-Rate (HR) applications, based on the BMD101, a specialised bio-signal sensing System-on-Chip (SoC). ECG 4 Click Board™ offers a reliable and accurate ECG and heart-rate monitoring, by sending processed bio-data over the UART interface. Its interface offers great flexibility and thus, very simple integration into any development environment. Besides the highly specialised bio-sensing SoC, ECG 4 Click Board™ is equipped with the 3.5mm electrodes connector, as well as with ESD protection diodes, making it ready to be used out of the box.

    ECG 4 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click Board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS socket.

    Not rated yet
    • $43.62
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ECG 5 Click Board™

    The ECG 5 Click Board™ can be used for the development of ECG and Heart-Rate (HR) applications. The Click board™ features the AD8232, an integrated bio-signal front end. This IC has many features necessary for providing accurate ECG measurements, including very high common-mode rejection ratio, high gain with DC blocking capability, adjustable high-pass and low-pass filters, integrated right leg drive (RLD), etc. Electrodes presence detection pin helps to reduce the overall power consumption, as it can be used to set the standby mode of the host MCU. The fully conditioned bio-signal is available at the analog output to be sampled by an external A/D converter.

    Not rated yet
    • $43.62
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ECG 6 Click Board™

    Not rated yet
    • $36.14
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • ECG Click Board™

    This is an ECG (or EKG) machine on a Click Board™. It measures the electrical activity of a beating heart through electrodes taped to the skin. The board requires little setup, and the final measurement results can be displayed as an Electrocardiogram using a free Windows app.



    Not rated yet
    • $48.61
    • Including 20% UK VAT*
  • ECG Click Board™ bundle

    ECG Click Bundle.

    Not rated yet
    • $85.99
    • Including 20% UK VAT*
    Order Now
  • EEG Click Board™

    The EEG Click Board™ allows monitoring of brain activity. Although not suitable for clinical examination, it is quite sufficient to allow some insight into brain activity. EEG Click Board™ is equipped with a high-sensitivity circuit which amplifies faint electrical signals from the brain, allowing them to be sampled by a host MCU. To allow sufficiently high gain with no interference, EEG Click Board™ uses the INA114, a precision instrumentation amplifier, LASER trimmed for very low offset voltage, featuring very good common mode rejection ratio. This Click Board™ can be used with the set of silver-chloride electrodes.

    Not rated yet
    • $48.61
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • EMG Click Board™

    The EMG Click Board™ measures the electrical activity produced by the skeletal muscles. It is based on the MCP609 operational amplifier and MAX6106 micropower voltage reference.

    EMG Click Board™ is designed to run on a 5V power supply. The Click Board™has an analog output (AN pin).

    Not rated yet
    • $36.14
    • Including 20% UK VAT*
  • EMG Click Board™ bundle

    EMG Click Board™ bundle - measure the electrical activity of muscles.

    Not rated yet
    • $73.53
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Fever Click Board™

    The Fever Click Board™ features a specially designed sensor, which is capable of accurate measurement of human body temperature. This Click Board™ uses the MAX30205 human body temperature sensor with the accuracy rating that complies with the clinical thermometry specifications of the ASTM E1112 standard. In addition, the sensor offers an open drain programmable interrupt output and uses the industry standard I2C interface, enforced with the additional timeout feature, that prevents lockdown of the I2C bus. It includes some other features as well, such as the programmable interrupt pin polarity, improved accuracy in the range between 37.5 &Deg;C and 40.0 &Deg;C, low power consumption feature, and more.

    Not rated yet
    • $13.71
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • GSR Click Board™

    The GSR Click Board™ can be used to measure the electrodermal activity (EDA) of the human body, also known as the galvanic skin response (GSR). EDA is actually the property of the human body that causes continuous variation in the electrical characteristics of the skin. EDA monitoring is usually combined with the monitoring of the heart rate, respiratory rate, and blood pressure, giving a complete insight into some of the parameters of the autonomous nervous systems of the human body.

    Not rated yet
    • $29.91
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Heart Rate 3 Click Board™

    The Heart rate 3 Click Board™ is a mikroBUS add-on board whose functionality is determined by two components: an OSRAM's SFH7050 pulse oximetry and heart rate monitoring module, and a TI AFE4404 (analog-front-end) IC specialised for bio-sensing.

    Not rated yet
    • $48.61
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Heart rate 4 Click Board™

    The Heart Rate 4 Click Board™ is based on the Maxim MAX30101 high-sensitivity pulse oximeter and heart-rate sensor. The Click Board™ is designed to run on either 3.3V or 5V power supply.

    It communicates with the target MCU over I2C interface, with additional functionality provided by INT pin on the MikroBUSline.

    Not rated yet
    • $26.17
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
  • Heart Rate 5 Click Board™

    The Heart Rate 5 Click Board™ is the optical biosensor Click Board™ which can be used for the heart-rate monitoring (HRM), as well as the peripheral capillary oxygen saturation monitoring (SpO2). This Click Board™ employs a very sensitive analog front-end IC with high dynamic range, which ensures accurate and reliable readings. This analog front-end IC is coupled with the optical front end, which consists of the top-of-the-class integrated BIOFY sensor, which features two green LEDs, one red LED, one infrared LED, and two photodiodes (PD), offering very accurate HRM and SpO2 readings.

    Not rated yet
    • $39.88
    • Including 20% UK VAT*
    Only 1 left in stock. Order Now
Products: 116 of 21

Bestsellers

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.