Microchip PIC32 Development Boards

Products: 112 of 12
  • Clicker Board 2 for PIC32MX

    Blend different functionalities together and quickly build new and original gadgets using the Click Board™er 2 for PIC32MX board. The Click Board™ two-seater for PIC32MX is a compact development board driven by a 32-bit PIC32MX460F512L MCU from Microchip, operates at 80 MHz/105DMIPS, and has 512+12KB of program memory and 32KB of RAM. This Click Board™er 2 board includes two MikroBUS sockets that allow user to plug in any two add-on Click Boards™ with unique functionalities and features. The board also has two indication LEDs, two general purpose buttons, a reset button, a USB Mini-B connector, a li-polymer battery connector, and an on/off switch. To assist in interfacing with external electronics, a MikroProg connector and a 2x26 pinout is provided.

    The user can supply power to the Click Board™er 2 for PIC32MX board with either a Mini-B USB cable or using a Li-Polymer battery, via on-board battery connector. It comes preprogramed with a fast USB HID bootloader, which enable user to load code into it without requiring an external programmer. However, the user can also program the MCU using external programmer using on-board pads for installing a header compatible with the MikroProg for PIC.

    An LTC3586-1 power management IC allows charging of a connected battery via USB and delivers 3.3V or 5V to the add-on boards. The MikroBUS host connectors each consist of two 1'.

    Not rated yet
    • $49.71
    • Including 20% UK VAT*
  • Clicker Board™ 2 for PIC32MZ

    The Click Board™er 2 for PIC32MZ is a compact PIC32 development kit with two mikroBUS sockets for Click Board™ connectivity. It carries the PIC32MZ 32-bit microcontroller (1 MB Live-Update Flash and 512 KB SRAM) with FPU from Microchip. With a built-in USB-HID bootloader the Click Board™er 2 for PIC32MZ it easy to program.

    Not rated yet
    • $49.71
    • Including 20% UK VAT*
  • EasyPIC Fusion v7

    The EasyPIC Fusion v7 is MikroElektronica's latest prototyping board for the Microchip PIC24, dsPIC33 and PIC32 microcontrollers. Providing support to over 101 microcontrollers via MCU cards, the board comes with on-board MikroProg fast USB 2.0 programmer and In-Circuit debugger that allows hobbyists, beginners, as well as professionals with high-speed programming and easy debugging.

    The board is rich with peripherals, which makes it a great choice for multimedia development. Equipped with modules like TFT with touch panel, stereo audio codec, USB device and host, navigation switch, and microSD card slot, the EasyPIC Fusion v7 board is all-set for all kinds of development. It has two MikroBUS host sockets that enable user to use a wide range of Click Boards™ without making any hardware adjustments in order to add special functionality to the design. With on-board Ethernet support, the board comes integrated with an Ethernet connector and two signal LEDs. The EasyPIC Fusion v7 currently supports 125 Microchip devices.

    Note: The board is sold without an MCU card, so the user can make a choice as per his own set of requirements. The MCU card is available separately.

    Not rated yet
    • $228.14
    • Including 20% UK VAT*
  • EasyPIC FUSION v7 ETH MCU card with PIC32MX795F512L

    EasyPIC FUSION v7 ETH MCUcard with PIC32MX795F512L.

    Not rated yet
    • $38.11
    • Including 20% UK VAT*
  • EasyPIC FUSION v7 ETH MCU card with PIC32MZ2048ECH144

    EasyPIC FUSION v7 ETH MCUcard with PIC32MZ2048ECH144.

    Not rated yet
    • $49.71
    • Including 20% UK VAT*
  • EasyPIC FUSION v7 ETH MCU card with PIC32MZ2048EFH144

    This particular EasyPIC FUSION v7 ETH MCUcard contains the PIC32MZ2048EFH144 microcontroller with on-chip peripherals. It's a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.

    Not rated yet
    • $49.71
    • Including 20% UK VAT*
    Out of Stock - Order Now, Ships within 5 days
  • Flip&Click Board™ PIC32MZ

    The Flip&Click Board™™ PIC32MZ is a two-sided development board with a split personality. It can be used with chipKIT core (Arduino-style development environment), but it can also be used with MikroC, MikroBasic, and MikroPascal for PIC32.

    It's a beginner-friendly rapid prototyping tool expandable with up to four Click Boards™.

    Not rated yet
    • $62.45
    • Including 20% UK VAT*
  • Flip&Click Board™ PIC32MZ (with ChipKIT bootloader)

    Flip&Click Board™™ PIC32MZ is a two-sided development board with a split personality. It can be used with chipKIT core(Arduino-style development environment.

    It's a beginner-friendly rapid prototyping tool expandable with up to four Click Boards™.

    Not rated yet
    • $62.45
    • Including 20% UK VAT*
  • MINI-32 Board

    The MINI-32 is a small development board containing PIC32MX534F064H microcontroller. It operates on 3.3V power supply. An on-board voltage regulator allows the board to be powered directly from USB cable. Comes preprogrammed with USB bootloader.

    Not rated yet
    • $36.96
    • Including 20% UK VAT*
  • MINI-32 for PIC32MZ

    MINI-32 for PIC32MZ is a small PIC32 development board containing the PIC32MZ microcontroller (1 MB Live-Update Flash and 512 KB SRAM) with FPU from Microchip.
    This compact and powerful development board is designed to work as a standalone device or as an MCU card in DIP40 socket.

    Not rated yet
    • $36.96
    • Including 20% UK VAT*
  • PIC32MX Clicker Board

    The PIC32MX Click Board™er is an amazingly compact starter development kit which brings innovative mikroBUS host socket to your favourite microcontroller. Board features all you need to get started: 32-bit PIC32MX534F064H microcontroller, USB connector, two LEDs and push buttons, reset button and headers for interfacing with external electronics.

    Not rated yet
    • $31.86
    • Including 20% UK VAT*
  • PIC32MZ Clicker Board
    • 6% less

    PIC32MZ Clicker Board

    The PIC32MZ Click Board™er Board is a compact development board with a mikroBUS socket for Click Board™ connectivity. It carries the PIC32MZ 32-bit microcontroller (1 MB Live-Update Flash and 512 KB SRAM) microcontroller with FPU from Microchip. To make your prototyping experience as convenient as possible, PIC32MZ Click Board™er is preprogrammed with a USB-HID bootloader.

    Not rated yet
    • $36.96
    • Including 20% UK VAT*

Bestsellers

* Note: VAT registered customers in the EU (except UK) and all customers outside the EU will have VAT deducted at the checkout.