Serial Interface Boards

Ethernet Programmable Module - No RJ45.

Ethernet Programmable Module with openPicus.

The OpenPicus FlyPort Wi-Fi module is a self contained Wi-Fi interface allowing you to provide Wi-Fi capability to your application quickly and easily.

The OpenPicus FlyPort Wi-Fi module is a self contained Wi-Fi interface allowing you to provide Wi-Fi capability to your application quickly and easily.

The OpenPicus FlyPort-SK Starter Kit comprises a FlyPort module (PCB Antenna version) and an USB Nest evaluation board. The board has an integrated FTDI chip (USB to Serial converter) and the board is powered from the USB Interface.

Designed for RS-485 communication, the RS-485 Interface Board is a perfect option for use in electrically noisy environment on long distances (up to 1200 metres). The board features integrated ADM485 differential line transceiver that can be used for high-speed bi-directional communications in multipoint tire. Compliant with EIA standards RS-485 and RS-422, this differential transceiver provides balanced data transmission lines. The ADM485 module aboard RS485 additional board has a differential line driver and a differential line receiver. It is designed to operate using a 5V power supply only. Use of voltage translators is advised when using the board with 3.3V development systems.

This board is an ideal choice for low power RS485 systems, DTE/DCE interfaces, packet switching, Local Area Networks (LANs), data concentration, data multiplexers, Integrated Services Digital Network (ISDN), and many more.

Now introduce more speed and flexibility in Ethernet applications using the new Serial Ethernet 2 Board. Designed to easily connect MikroElektronika's development systems and prototyping boards, the board has an ENC624J600 10/100 Base-T Ethernet controller from Microchip. It also features an integrated MAC & PHY, hardware cryptographic security engines and a unique MAC address. The Serial Ethernet 2 uses the industry standard SPI for communication with the host controller. A series of on-board DIP switches allow user to select which pins will be used for SCK, MISO and MOSI lines. The Serial Ethernet 2 Board can be configured for use with 3.3V and 5V microcontrollers. A jumper J1 allows user to connect to any of the two power supply positions (3.3V or 5V). The on-board LEDs denote the power status as well as indicate data transfer through the Ethernet network.

With these features, Serial Ethernet 2 board is an ideal choice for high-speed Ethernet devices that requires low power consumption and high data rates.