MCU Boards

100-pin LV24-33 MCU Cards provide easy connection to the development system through four 2x10 male connectors. The bottom layer of these cards is provided with a ground plane for noise prevention.

dsPIC' Embedded Evaluation Board for 64-pin devices

dsPIC MCU Card 2 empty PCB.

dsPIC MCU Card 3 empty PCB.

EasyMx PRO v7 for STM32 Empty MCUcard 100pin TQFP.

EasyMx PRO v7 for STM32 Empty MCUcard ETH 100pin TQFP.

EasyMx PRO v7 for STM32 Empty MCUcard HP 100pin TQFP.

EasyMx PRO v7 for STM32 Empty MCUcard HP ETH 100pin TQFP.

The HP ETH MCU card is shown on Figure 1. It contains STM32F207VGT6 microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.

The HP ETH MCU card is shown on Figure 1. It contains STM32F407VGT6 microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.

The EasyMx PROv7 for STM32 MCUcard with STM32F207VGT6 is the first MCU card for EasyMx PRO v7 to carry an ARM

The MCU card it contains the TM4C123GH6PM microcontroller which is loaded with on-chip modules and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.