DIP to PLCC44 Adapter Board
Convert a DIP40 PIC socket into PLCC44 PIC compatible socket using the DIP to PLCC44 Adapter Board. Designed for a rapid and trouble-free operation, a PLCC (Plastic Leaded Chip Carrier) adapter allows the user to use a PIC with the PLCC housing shape in a device that supports only DIP packaging. The high-quality, compact-sized adapter board can be used with any programming board featuring the DIP40 socket. Without this adapter board, no connection can be established between the plug shape of a programming device and the housing shape of a chip. A PIC microcontroller is placed into the adapter before the programming starts. The microcontroller can be pulled out of the adapter after programming is done. DIP to PLCC44 Adapter Board supports a wide range of PIC microcontrollers, which includes 16F74, 16F77, 16F871, 16F874A, 16F877A, 18F242, 18F252, 18F442, 18F448, 18F452, and 18F458. DIP to PLCC44 Adapter Board is suitable for testing the PLCC44 chips. The top side of board fits socket while the bottom side of PCB features two single row surface mount vertical headers. It allows easy and fast work with PICs in PLCC44 package.
The EasyPROTO Board is a complete, cost-effective solution to deal with all your connection difficulties. The board features 10 port pins, labeled as D0-D7, VCC, and GND. The EasyPROTO Board includes 10 header pads on one end and a ribbon flat cable with 2x5-pin female IDC10 connector on the other. The ribbon cable is connected to some of the development system
Ethernet Connector Board
Introduce an improved way to add a reliable connection capability to the Ethernet-enabled device using the Ethernet Connector Board. Easy yet effective, the Ethernet Connector board acts as an interface for microcontrollers that have integrated Ethernet controller. The board employs a high-quality 10/100 Base-T RJ45 connector with integrated Rx and Tx LED indicators. Featuring a small footprint, the board also has surrounding electronics for stable and reliable Ethernet operation. It is designed to operate using a 3.3V power supply only. When connecting to 5V systems, it is advised to use voltage translators on the communication lines.
ICD2 Connector Board
Easily connect the ICD2/ICD3 or Real ICE programmers/debuggers to the prototyping device using the ICD2 Connector Board. It is offered with a loose 1x6 header connector that user can solder, when required. The single-row header and the RJ12 connector are wired one to one. This RJ12-type connector provides easy prototyping and considered suitable for use with solderless breadboards. The RJ12 socket is wired to six pins to provide access to PGD, PGC and /MCLR lines along with VCC and GND power connections. Featuring a compact design, ICD2 Connector Board works as a cost-effective solution to solve your connecting problems. The board is designed to perfectly fit into standard prototyping boards.
PROTO Connect 2 Board
Introduce a simple and convenient way of connecting multiple wires from power supply, communication, analog and/or GPIO lines to a breakout board using the PROTO Connect Board. This adapter board includes two connection pads in standard 100mil spacing and two screw terminals to meet the device requirements. It also has male header pins that can be soldered. This compact-sized and affordable board makes for a great choice for prototyping.
PROTO Connect Board
Introduce a simple and convenient way of connecting eight wires from power supply, communication, analog and/or GPIO lines to a breakout board using the PROTO Connect Board. This adapter board includes eight connection pads in standard 100mil spacing and eight screw terminals to meet the device requirements. It also has male header pins that can be soldered. This compact-sized board makes for a great choice for prototyping.
PS/2 Connector Board
Add PS/2 connectivity to the prototype, development board or final device using the PS/2 Connector Board. This board has a standard shielded PS/2 connector and on-board 4 connection pins compatible with standard breadboards with 100mil pin spacing. The PS/2 Connector Board is offered with clear markings on front and back to streamline connection. This compact-sized interface board features unpopulated pin pads, which allows user to connect to the development system. The user can solder on the provided make header pins. As per the PS/2 standard specification, the board is designed to operating using a 5V power supply only.
SOIC-18-Wide to DIP18-300mil Adapter
Convert SOIC Wide 18 pins (300 mil wide) package to DIP 18 pins.
SOIC-20-Wide to DIP20-300mil Adapter
Convert SOIC Wide 20 pins (300 mil wide) package to DIP 20 pins.
SOIC-28-Wide to DIP28-300mil Adapter
Convert SOIC Wide 28 pins (300 mil wide) package to DIP 28 pins.
SOIC-28-Wide to DIP28-600mil Adapter
Convert SOIC Wide 28 pins (600 mil wide) package to DIP 28 pins.
SOIC-SOP-14 to DIP14-300mil Adapter
Convert SOIC-SOP14 pins (300 mil wide) package to DIP 14 pins.