LDC1000 Click Board
Equip your design with the first inductance-to-digital converter IC by using the LDC1000 click. The board also features a detachable PCB sensor, which comprises of a 36-turn PCB coil and a 100pF 1% NPO capacitor. LDC1000 click also allows the user to experiment with different sensors by breaking off the original and soldering it to the on-board INA and INB pins.
The on-board INA and INB pins enable the user to replace the offered detachable sensor and solder its own. LDC1000 click communicates via MikroBUS SPI (CS, SCK, MISO, MOSI) and INT lines with the target board MCU. It supports either a 3.3V or 5V power supply.
In short range applications, the LDC1000 features a sub-micron resolution, which makes LDC1000 click an ideal choice for very precise short range measurements of the position, motion or composition of conductive targets. Based on a contactless, magnet-free inductive sensing technology, LDC1000 click offers steadfast performance even in hostile environments like, in the presence of dust, dirt, oil, moisture, etc.
- Introduce reliable inductive sensing technology into the user design
- Sub-micron resolution in short-range applications
- Magnet-Free, Contact-less Operation
- Remote sensor placement
- Insensitivity to environmental interference
- Detachable sensor (36-turn PCB coil and 100pF 1% NPO capacitor)
- Uses 3.3V or 5V power supply
- Uses SPI communication interface
- Supported in all MikroElektronika compilers
IC/Module: LDC1000 Inductance-to-Digital Converter
Known to be the world's first inductance-to-digital converter IC, LDC1000 is a high resolution inductive sensing technology based IC that offers the benefits of inductive sensing in a low-power, small-footprint solution.
LDC1000 click is based on a contactless, magnet-free inductive sensing technology with huge potential in embedded design. Designed for tough conditions, it provides better performance and high reliability at lower cost. It enables the user for enables accurate measurement of linear and angular position, displacement, motion, compression, vibration, metal composition, and several other applications. .
Detachable PCB Sensor
LDC1000 click features a detachable PCB sensor, which is an LC tank that includes a 36-turn PCB coil and a 100pF 1% NPO capacitor. The user can try out using different sensors, to attain a low-cost solution, by breaking off the original, and soldering the new sensor to the onboard INA and INB pins. .
- LDC1000 Click Board (1)
- 1x8 male headers (2)
- Printed User Manual and Board Schematic (1)
If you've already bought this product, please sign in and add your own review!