LE-580FX LAN Analyser
The Lineeye LE-580FX LAN analyser connects to the PC USB 2.0 port. With TAP mode, you can capture full duplex data on 10/ 100Base-TX and transmited to the PC via USB2.0 (480Mbps).
With PG mode, you can generate Test packets max. at 100Mbps line rate. Capture 10/100Mpbs LAN Packets via USBTAP mode captures 10/100Mbps full-duplex data on PortA/ PortB, and transmits to PC via USB2.0 port. Captured data can be displayed on the PC.
Filter-out Unwanted Packets
LE-580FX is not only able to capture all frames but also filter the specific packets. Filtering conditions can be set by MAC/IP address, protocols (ARP/IP/ICMP/IGMP/TCP/UDP/use defined), and specifying IP address/port/packet size etc.
Export to Excel
The captured data with time stamp information can be exported to Microsoft Excel format.
You can evaluate the amount of traffic visually. For each lines, there are 3 bar graph indicators of packet, utilization ratio and error count.
LAN Analysis Software
Captured data can be used with LAN analysis software, Ethereal / Wire shark. LE-580FX works as network adaptor. Able to control LE-580FX by using Ethereal / Wireshark.
Generate Test Packets
PG mode generates Test packets at your specified transmitting speed. Tell you the processing ability of the network devices and how they work at the high traffic. Test packets are generated in the FPGA, so it will not be affected by the performance of PC. The user can define 2~7 layer of data frames up to 128, and transmit them continuously or selected times. Add errors (CRC etc.) and VLAN/MPLS tags. Captured packets can be used as transmitting packets.
Hardware Counter For Statistics
Calculate statistical information in the FPGA to know the quality of network. Display the results in trend charts and graphs for each port. LE-580FX does not only calculate numbers of data, but also calculate by each error, packet size, collision type and filtering.
Able to have the network Qos Test by transmitting Test data from PortA(B) to PortB(A). Test packet lines can be set up to 8, includes VLAN VID (0-4095) and CoS (0-7) Parameter. QoS Test tells you the packet loss and latency etc.
- LE-580FX LAN Analyser (1)
If you've already bought this product, please sign in and add your own review!