Lipowsky Industrie Elektronik GmbHmore...
Baby-LIN-II LIN Bus Adapter
The Baby-LIN-II from Lipowsky Elektronik is a control device that allows you to control LIN-bus equipped devices with the help of a standard computer system. This is controller connects to the USB port of the computer and give you to the freedom to control the LIN Bus directly.
Baby-LIN-MB II CAN/LIN Bus Simulator
The Baby-LIN-MB II Multi-Bus Gateway is capable of simulating LIN Bus traffic derived from Ethernet or RS-232C data interfaces. The device is also expandable to extend its interfacing options.
Baby-LIN-RC-II LIN Bus Adapter with Keyboard
The Baby-LIN-RC-II, just like the standard Baby-LIN, is a USB to LIN-bus converter, with a major difference being the integrated keyboard. This keyboard allows you to run predefined instructions, which are stored in the controller, on any LIN-Bus device connected to the controller.
The Baby-LIN-RC can be used stand-alone, having been programmed by a PC.
Baby-LIN-RM-II LIN Bus Adapter
The Baby-LIN-RM-II is a rail mountable LIN and CAN bus simulator that features digital inputs and outputs. This device serves as a simple and economic solution of adding a LIN or CAN interface to your existing PLC. It works with a standard, off-the-shelf computer system and requires only a USB port to work.
CAN Bus Converter with CAN Terminator
The Lipowsky IF-CAN-BC-revE01 converter with terminator will enable the user to connect a system with CAN high-speed-interface (CAN-Buslayer ISO-11898 or CAN C) to low-speed fault tolerant (CAN-Buslayer ISO-11519 or CAN B) busses.
CAN Bus High-Low Converter without Terminator
The Lipowsky IF-CAN-BC-revE02 converter with terminator will enable the user to connect a system with CAN high-speed-interface (CAN-Buslayer ISO-11898 or CAN C) to low-speed fault tolerant (CAN-Buslayer ISO-11519 or CAN B) busses.
HARP-5 CAN and LIN Bus Simulator
The Lipowsky HARP-05 is a mobile LIN and CAN bus simulation device that comes with data logging capability and features a display, an integrated keyboard, and a battery. It also comes with an SD-card that can store multiple configurations, which can be later accessed as and when required. This feature allows you to analyze all bus communication directly from the device, without even connecting a computer to it.
This simulator helps you in running LIN and CAN bus devices and viewing signal values in real time. You can also choose to change signal values or execute macros to control the bus.