The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

MikroE Click Boards

MikroE Click Boards

MikroE Click Boards

Click Boards™ offer simple and inexpensive way to evaluate and incorporate interfaces into your microntroller-based system. Over 185 different models have been created so far and the list grows weekly.


MikroBUS™

Developed by MikroElektronika (mikroE), Click Boards™ connect to your microcontroller via the MikroBUS™. a powerful interface common to all models. MikroBUS™ is evolving into a standard within the embedded systems market and is being taken up by many other manufacturers.

mikroBUS™ Pinout Diagram


Why Click Boards™?

They provide a standard way of adding evaluating new interface devices. MikroElektronika design and manufacture Click Boards™ for device manufacturers to offer a simple way of using their devices. They are compatible with all MikroE development boards, supporting a wide range of microcontroller types including ARM Cortex, AVR, PIC, PIC32, dsPIC, FT90x and 8051. MikroE models are also fully supported by MikroE complers and toolsets and example application code is created to enable you to start using your new Click Board™ straight away This can significantly reduce the learning curve normally associated with the introduction of new technology.

Incorporate MikroBUS™ into Your Own Design

There are many good reasons to want to offer extendability to your own board designs:

  • To allow other interfaces to be added to your own system without having to redesign your hardware.
  • Test the market for additional functionality at minimal outlay

Although mikroBUS™ is a trademark of mikroElektronika, they allow you to incorporate the bus layout into your design as long as the silkscreen is clearly labeled "mikroBUS™" and includes the mikroBUS™ logo.


Third Party Support

Many leading semiconductor manufacturers are now offering MikroBUS™ interfaces on their development platforms allowing our models to be used wherever you need them.

New Arrivals

more...

Products

Light Click Board

NEW

Light Click Board

With Light click, Mikroelektronika introduces a compact and easy solution to add light measurement to your design. Carrying a PD15-22CTR8 PIN photodiode, this measurement add-on board lets the user effectively measure ambient light intensity and provides a signal (analog or digital) to the target board microcontroller.

Moulded in water clear plastic with depictive silk screen markings, PD1522CTR8 is a high photo sensitivity PIN photodiode that is ideal for high speed photo detector, copier, game machine, etc. The click board also includes MAX6106 voltage reference and MCP3201 ADC with SPI communication interface. Light click communicates with the main board MCU through SPI (MISO, SCK, CS) and AN lines. It is designed to use either 3.3V or 5V power supply.

MIKROE-1424

$25.41

LightHz Click Board

NEW

LightHz Click Board

The mikroE LightHz Click Board is an easy and compact solution to add light-to-frequency conversion functionality to your project. This add-on board features a TSL230BR programmable light-to-frequency converter, which provides high-resolution conversion of light intensity to frequency without requiring external components. All inputs and the output are TTL compatible, and allows for direct two-way communication with a microcontroller for programming and output interface. The output can be either a pulse train or a square wave (50% duty cycle) with frequency directly proportional to light intensity. It has programmable sensitivity and full-scale output frequency. The device sensitivity is selectable between Power Down, 1x, 10x and 100x. The full-scale output frequency can be scaled by one of four preset values: 1, 2, 10 and 100. The device sensitivity and frequency scaling can be determined by the microcontroller, or selected using available SMD jumpers. It is designed to operate on 3.3V by default, however, the user can select 5V power supply through a voltage-selection SMD jumper.

MIKROE-990

$25.30

LightRanger Click Board

NEW

LightRanger Click Board

LightRanger Click Board

MIKROE-1897

$31.62

Lin Hall Click Board

NEW

Lin Hall Click Board

Introduce a linear Hall sensor to your design with the LIN HALL click board. The board includes a Melexis MLX90242 linear Hall sensor IC along with an MCP3201 12-bit ADC. LIN HALL click outputs a signal that is linearly proportional to the flux density of a magnetic field it is exposed to. A north pole magnet field will increase the output, while a south pole field decreases it. Using the mikroBUS SPI lines (CS,

SCK, MISO), LIN HALL click communicates with the target board microcontroller. It uses either a 3.3V or 5V power supply (default is 3.3V).

The linear Hall sensors are used to infer the linear or rotary position of a target object, provided there is a magnet attached, or something to disturb an existing magnetic field. It is an ideal choice to measure strength of different magnets or measure distance of a magnet from the sensor.

MIKROE-1648

$24.37

Line Follower Click Board

NEW

Line Follower Click Board

Line Follower Click Board

MIKROE-1999

$22.30

LoRa RF Click Board

NEW

LoRa RF Click Board

Introduce a low-power, high-network capacity solution for long range wireless connectivity to the design using the LoRa RF click. Compliant with LoRaWAN Class A protocol specifications, the board features Microchip

MIKROE-1997

$62.74

LPG Click Board

NEW

LPG Click Board

LPG click is a highly sensitive liquefied petroleum gas leakage sensing device. Users can easily add this accessory board to their design of LPG leakage equipment. LPG click features a powerful MQ-5 sensor for detecting LPG. It has also got two jumpers, a power indicator LED, a mikroBUS host socket and a calibration potentiometer. LPG click can precisely detect the LPG levels in the range of 200 to 10000ppm of concentrations.

The MQ-5 sensor features a gas sensing layer constructed of tin dioxide (SnO2) which is an inorganic compound. Since tin dioxide has lower conductivity in clean air, as the percentage of LPG increases in the environment the conductivity rises too. The potentiometer enables the user to adjust the load resistance of the sensor circuit so that LPG click may be calibrated for the targeted surroundings.

LPG click is great for use as a LPG checker for detecting LPG concentration in the air. It can be used in the devices like domestic gas leakage detectors, industrial combustible gas detectors and portable gas detectors.

MIKROE-1587

$22.30

Magneto Click Board

NEW

Magneto Click Board

The Magneto click is an accessory board that comes equipped with a contactless magnetic 360?? angle position sensor chip termed as AS5048A. The operations of the sensing circuitry of this board are based upon the Hall Effect. Magneto can easily detect the presence of a nearby magnetic field in a 360?? two-dimensional plane adjacent to the surface of the AS5048A chip. The angle measurements provided by the Magneto click can be precisely down to 0.05?? in 14-bit resolution, if an external MCU does the linearization and averaging tasks. The board

MIKROE-1886

$44.07

Methane Click Board

NEW

Methane Click Board

Methane click board makes it simple for the user to add a highly sensitive methane (CH4) sensor to his design. This add-on board comes equipped with an MQ-4 sensor for measuring methane, two jumpers and a power indicator LED. It has also got a calibration potentiometer and a mikroBUS host socket. The range in which Methane click can precisely detect the methane levels is from 200 to 10000ppm of concentrations. The MQ-4 sensor features a gas sensing layer constructed of tin dioxide which is an inorganic compound with the formula SnO2. Tin dioxide is known to have lower conductivity in clean air. As the percentage of methane increases in the environment, the conductivity rises too. The potentiometer enables the user to adjust the load resistance of the sensor circuit so that methane click may be calibrated for the intended surroundings. As the concentration of the target gas changes, the resistance of the sensor component also gets changed.

Methane click finds its application in designing of gas leakage equipment. Being suitable for detecting methane concentration, Methane click can be used in the devices like domestic gas leakage detectors, industrial combustible gas detectors and portable gas detectors.

MIKROE-1628

$22.30

microSD Click Board

NEW

microSD Click Board

One of the earliest mikroBUS-compatible click boards introduced by MikroElektronika

MIKROE-924

$23.33

MOTION Click Board

NEW

MOTION Click Board

Give your design the infrared motion detector functionality with the MOTION click. Designed to respond only to living bodies, this click board features PIR500B, a pyroelectric infrared radial sensor that generates a voltage when exposed to infrared light. It is connected to a BISS0001 motion sensor controller IC processes the signal and sends an interrupt to the host MCU via the mikroBUS INT (out) line. MOTION click also includes an onboard potentiometer that enable the user to adjust the detection range (up to 4 metres). Using the mikroBUS RST pin of the host microcontroller, the user can turn the potentiometer on/off by sending signals. The photo resistor aboard MOTION click that allows the user to set up the sensor to work only when it's dark. The night-only mode can be activated by using a jumper (zero-ohm resistor) below the photo resistor on the left side of the board. MOTION click is designed to support only a 3.3V power supply.

It is commonly used in human motion detector applications like burglar alarms, but the user can apply this concept to make lights switch ON as soon as someone enters the room, or restricting persons from entering a certain area.

MIKROE-1589

$20.22

MP3 Click Board

NEW

MP3 Click Board

The MP3 Click Board is an easy and compact accessory board that incorporates a versatile VS1053 stereo MP3 decoder chip. Designed to add MP3 feature, the VS1053 IC allows the user to decode all the commonly used formats (including the new AAC format). The formats include Ogg vorbis, MP3, MP1, MP2, MPEG4, WMA, FLAC, WAW, and MIDI. It also allows encoding of three different formats (Ogg vorbis, IMA ADPCM, 16-bit PCM) from microphone line in mono or stereo. MP3 click utilize the industry-standard SPI line for communication with the target board microcontroller. This click board also includes stereo headphone and microphone audio connectors. It is designed to use a 3.3V power supply only.

MP3 click is an easy-to-use, powerful workhorse for audio playback and recording applications, including MP3 players, audio signalization devices, voice recorders, and many more.

MIKROE-946

$29.45