The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

MikroE Click Boards

MikroE Click Boards

MikroE Click Boards

Click Boards™ offer simple and inexpensive way to evaluate and incorporate interfaces into your microntroller-based system. Over 185 different models have been created so far and the list grows weekly.


MikroBUS™

Developed by MikroElektronika (mikroE), Click Boards™ connect to your microcontroller via the MikroBUS™. a powerful interface common to all models. MikroBUS™ is evolving into a standard within the embedded systems market and is being taken up by many other manufacturers.

mikroBUS™ Pinout Diagram


Why Click Boards™?

They provide a standard way of adding evaluating new interface devices. MikroElektronika design and manufacture Click Boards™ for device manufacturers to offer a simple way of using their devices. They are compatible with all MikroE development boards, supporting a wide range of microcontroller types including ARM Cortex, AVR, PIC, PIC32, dsPIC, FT90x and 8051. MikroE models are also fully supported by MikroE complers and toolsets and example application code is created to enable you to start using your new Click Board™ straight away This can significantly reduce the learning curve normally associated with the introduction of new technology.

Incorporate MikroBUS™ into Your Own Design

There are many good reasons to want to offer extendability to your own board designs:

  • To allow other interfaces to be added to your own system without having to redesign your hardware.
  • Test the market for additional functionality at minimal outlay

Although mikroBUS™ is a trademark of mikroElektronika, they allow you to incorporate the bus layout into your design as long as the silkscreen is clearly labeled "mikroBUS™" and includes the mikroBUS™ logo.


Third Party Support

Many leading semiconductor manufacturers are now offering MikroBUS™ interfaces on their development platforms allowing our models to be used wherever you need them.

New Arrivals

more...

Products

Ambient Click Board

NEW

Ambient Click Board

Ambient Click Board

MIKROE-1890

$16.00

Angle Click Board

NEW

Angle Click Board

The Angle click is a simple and compact accessory board featuring an A1332 contactless high resolution angle position sensor. Based on CVH (Circular Vertical Hall) technology, it detects the vector of a nearby magnetic field in a 360?? two-dimensional plane parallel to the surface of the chip. It is used with a rotating bipolar magnetic target. It also comprises of an on-chip EEPROM technology for flexible programming of calibration parameters. Angle click offers precise angle measurements with a refresh rate of 32 micro seconds and 12-bit resolution. The user can configure the output dynamic range, output scaling, and filtering. Designed for digital systems, Angle click uses the mikroBUS I2C interface (SCL, SDA) for communication with the target board microcontroller. It is designed to operate using either a 3.3V or a 5V power supply.

With such features, Angle click is an ideal choice for electronic power steering, torsion bar, digital potentiometer, and other applications.

MIKROE-2030

$23.24

BarGraph Click Board

NEW

BarGraph Click Board

Introduce a ten-segment light bar display to user design with the BarGraph Click Board from mukroE. This compact accessory board employs a JSB-R102510Z red LED bar display as well as two 74HC595 shift registers. The 74HC595 chip incorporates an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register with 3-state output. For communication with the target board microcontroller, BarGraph Click uses the mikroBUS SPI (MOSI, MISO, SCK, CS), RST and PWM lines. It allows data to be passed serially from a microcontroller and thus saving I/O lines. The board comes set for 3.3V operation, but can be adapted for 5V use by repositioning an SMD jumper. It has a green LED diode that indicates the presence of power supply.

BarGraph Click is an ideal option to easily build a VU metre. It allows multiple boards to be connected close together and aligned to form longer LED stripe.

MIKROE-1423

$19.10

Barometer Click Board

NEW

Barometer Click Board

The Barometer Click Board from mikroE is a high precision measurement add-on board that features the LPS25HB IC. The LPS25HB chip is a highly sensitive piezoresistive absolute pressure sensor that is capable of detecting as little as 0.01 hPa RMS in high resolution mode. The measurement range is from 260 to 1260 hPa with a 24-bit digital output. Barometer click can use either mikroBUS SPI or I2C communication interface, which is specified by soldering onboard jumpers in appropriate position. It also has a multifunctional interrupt pin that can be configured in either of the two ways: as Data Ready or as threshold trigger. Barometer click is designed to use a 3.3V power supply only.

This board is highly suitable for adding barometer or altimeter functionality to any design, for example, altitude measurement for wearables, weather station equipment, enhancing GPS functionality, etc.

MIKROE-1817

$22.20

BEE Click Board

NEW

BEE Click Board

A new add-on board for communication, the mikroE BEE Click Board employs the Microchip MRF24J40MA 2.4 GHz IEEE 802.15.4 radio transceiver module. MRF24J40MA module includes integrated crystal, internal voltage regulator, matching circuitry and PCB antenna. It operates in the 2.4 GHz frequency band and is FCC, IC and ETSI compliant. BEE click is an ideal solution for wireless networks, smart home and building automation, and other electronic applications that require wireless communication. The board is connected to the microcontroller through a SPI interface and is provided with a 3.3V power supply only. BEE click supports ZigBee, MiWi, MiWi P2P and proprietary wireless networking protocols with data rates of 250 kbps (IEEE 802.15.4) and 625 kbps (Turbo mode).

MIKROE-987

$36.66

Bi Hall Click Board

NEW

Bi Hall Click Board

Bi Hall Click Board

MIKROE-1646

$19.10

BLE 2 Click Board

NEW

BLE 2 Click Board

BLE2 Click Board

MIKROE-1715

$37.69

BLE P Click Board

NEW

BLE P Click Board

The BLE P Click from mikroE is a compact add-on board intended to add a peripheral Bluetooth Low Energy (BLE) device to your design. The

MIKROE-1597

$32.52

Bluetooth2 Click Board

NEW

Bluetooth2 Click Board

MikroElektronika has offered a new, advanced way to enrich your design with Bluetooth capability with the launch of Bluetooth2 click board. It provides your device with bluetooth capability with up to 1000m range. This accessory board is a compact, low power solution that includes BLUEGIGA WT41 Bluetooth?

MIKROE-1389

$67.62

Button G Click Board

NEW

Button G Click Board

Add a simple pushbutton functionality to your design with the Button G click. While the user has a freedom to choose from a range of onscreen user interfaces, the tactile feedback from pushing a physical button is hard to replace. The user can set it up depending on the device/design requirement. Any application that user a user-interface design and requires the tactile feel and feedback of a hardware pushbutton, Button G click seems to be an ideal choice. On press, the button is designed to send an interrupt signal to the target board microcontroller. The initial

MIKROE-2040

$16.94

Button R Click Board

NEW

Button R Click Board

Add a simple pushbutton functionality to your design with the Button R Click Board from mikroE. While the user has a freedom to choose from a range of onscreen user interfaces, the tactile feedback from pushing a physical button is hard to replace. The user can set it up depending on the device/design requirement. Any application that user a user-interface design and requires the tactile feel and feedback of a hardware pushbutton, Button R click seems to be an ideal choice. On press, the button is designed to send an interrupt signal to the target board microcontroller. The initial

MIKROE-1901

$16.94

Buzz Click Board

NEW

Buzz Click Board

Add sound function to the device in the form of beeps, tones and alerts using the Buzz Click Board. This audio and voice board employs a premium piezo speaker that produces audio signals. This compact round speaker allows the user to create simple audio sounds or voice messages into portable devices. The piezo speaker/buzzer is designed for best performance with a resonant frequency of 3.8 kHz. The Buzz click also features an integrated buzzer driver is connected to either the digital (CS/GPI) or the PWM line. Either of these pins can be used to provide the signal from the MCU to the buzzer driver. This click board is designed to operate using a 5V power supply. The user can solder an SMD jumper to the 3.3V position, when required. It has onboard power LED that denotes the power status.

Buzz click is an ideal choice for introducing audio signalization functionality to any user device.

MIKROE-945

$16.00