The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 
    
 

MikroE Click Boards

MikroE Click Boards

MikroE Click Boards

Click Boards™ offer simple and inexpensive way to evaluate and incorporate interfaces into your microntroller-based system. Over 185 different models have been created so far and the list grows weekly.


MikroBUS™

Developed by MikroElektronika (mikroE), Click Boards™ connect to your microcontroller via the MikroBUS™. a powerful interface common to all models. MikroBUS™ is evolving into a standard within the embedded systems market and is being taken up by many other manufacturers.

mikroBUS™ Pinout Diagram


Why Click Boards™?

They provide a standard way of adding evaluating new interface devices. MikroElektronika design and manufacture Click Boards™ for device manufacturers to offer a simple way of using their devices. They are compatible with all MikroE development boards, supporting a wide range of microcontroller types including ARM Cortex, AVR, PIC, PIC32, dsPIC, FT90x and 8051. MikroE models are also fully supported by MikroE complers and toolsets and example application code is created to enable you to start using your new Click Board™ straight away This can significantly reduce the learning curve normally associated with the introduction of new technology.

Incorporate MikroBUS™ into Your Own Design

There are many good reasons to want to offer extendability to your own board designs:

  • To allow other interfaces to be added to your own system without having to redesign your hardware.
  • Test the market for additional functionality at minimal outlay

Although mikroBUS™ is a trademark of mikroElektronika, they allow you to incorporate the bus layout into your design as long as the silkscreen is clearly labeled "mikroBUS™" and includes the mikroBUS™ logo.


Third Party Support

Many leading semiconductor manufacturers are now offering MikroBUS™ interfaces on their development platforms allowing our models to be used wherever you need them.

New Arrivals

more...

Products

EEPROM 2 Click Board

NEW

EEPROM 2 Click Board

EEPROM 2 Click Board

MIKROE-1909

$25.37

EEPROM 3 Click Board

NEW

EEPROM 3 Click Board

The EEPROM 3 Click Board is a compact add-on board intended for designs that rely on I2C for writing, reading, and erasing. The board features Atmel

MIKROE-1989

$21.22

EEPROM Click Board

NEW

EEPROM Click Board

The EEPROM Click Board from mikroE is an add-on storage board that includes a 24C08WP serial EEPROM with 8 Kbits of memory. Driven by CMOS technology, this click board enables the user to add more 8 Kbit EEPROM memory to the device. An ideal choice for low power and low voltage applications, 24C08WP module is compatible with the I2C memory standard and uses a bi-directional data bus and serial clock. It is available in a DIP packaging. The DIP socket makes EEPROM easily replaceable. EEPROM click works well with both the 100 kHz I2C standard-mode and the 400 kHz I2C fast-mode. The board is designed to operate on 3.3V or 5V power supply, selectable by an SMD jumper. Another set of SMD jumpers that allow address selection are also available on the board. The green LED diode denotes the status of power supply.

The EEPROM click is an ideal selection for storing initialisation and configuration data of your device.

MIKROE-1200

$15.00

EnOcean Click Board

NEW

EnOcean Click Board

The mikroE EnOcean click is powered by the EnOcean TCM310 transceiver module that works as a bidirectional gateway for communication with EnOcean

MIKROE-1908

$47.10

ETH Click Board

NEW

ETH Click Board

Add Ethernet functionality to your project with the ETH Click Board from MikroE. This accessory board is provided with a 28-pin, 10BASE-T stand-alone Ethernet controller, ENC28J60 by Microchip. Compliant with all of the IEEE 802.3 specifications, ENC28J60 chip uses the industry standard Serial Peripheral Interface (SPI). The board also employs a Medium Access Controller (MAC) and Physical Layer (PHY) that provides additional functionality. ETH Click has an 8-Kbyte transmit/receive packet dual port SRAM with configurable transmit/receive buffer size. The board communicates with the host controller through an interrupt pin and the SPI communication lines with clock rates of up to 20 MHz. The ENC28J60 aboard ETH Click supports programmable automatic retransmit on collision as well as programmable automatic rejection of erroneous packet. ETH Click includes standard RJ-45 connector and LEDs for transmit, receive and power. The integrated crystal oscillator ensures stable operation. It is designed to operate with a 3.3V power supply only.

ETH click is highly suitable for applications including VoIP, industrial automation, building automation, home control, security and instrumentation.

MIKROE-971

$31.57

ETH WIZ Click Board

NEW

ETH WIZ Click Board

The ETH Wiz click is an add-on board that makes use of a single Wiznet

MIKROE-1718

$26.40

EVE Click Board

NEW

EVE Click Board

EVE click is a compact and easy solution to introduce graphics controller to the user design. It includes FT800Q graphics controller and additional modules arranged in mikroBUS form factor. The EVE (Embedded Video Engine) click features a 3-in-1 functionality integrated with display, audio and touch interfaces. It supports 12 widgets and provides transparency and anti-aliasing support. EVE click provides five-star graphics even on 8-bit microcontrollers with little Flash and RAM. It contains 40-pin flat cable connector for connecting 4.3" touchscreens (display not included in the package). EVE click communicates with the target board microcontroller through the mikroBUS SPI (MISO, MOSI, SCK, CS), INT, RST and AN lines. This accessory board supports use of 3.3V power supply only. The green LED diode shows the presence of power supply. EVE click also incorporates flat cable connector, LM4864 audio amplifier, LED diode as well as screw terminals for additional functionality.

It is an ideal choice for Point of Sales (PoS) machines, Multi-Function Printers (MFPs), home security systems, graphic touch pad, medical appliances, power meters, home appliance devices, and many more.

MIKROE-1430

$47.10

Expand 2 Click Board

NEW

Expand 2 Click Board

EXPAND 2 click is an accessory board that includes MicroChip

MIKROE-1838

$19.15

Expand 3 Click Board

NEW

Expand 3 Click Board

Expand 3 Click Board

MIKROE-1874

$27.43

Expand 4 Click Board

NEW

Expand 4 Click Board

Expand 4 Click Board

MIKROE-1910

$21.22

Expand Click Board

NEW

Expand Click Board

The EXPAND Click Board is an add-on board featuring a Microchip MCP23S17 16-bit I/O expander with SPI clock speeds up to 10 MHz for higher rate of production of applications. For board address configuration, it uses three HARDWARE ADDRESS SEL jumpers that also allows for connection with up to eight devices on the bus. The interrupt-on-change feature is also supported by the controller. EXPAND click uses the SPI communication interface for communication with the on-board port expander. The 16 bidirectional I/O port bits are divided into two 8-bit ports (PORTA and PORTB). The user can choose to configure MCP23S17 to operate in the 8-bit or 16-bit mode. Acting as bidirectional I/Os, all the pins can be enabled for internal weak pull-up resistor and/or interrupt-on-change.

With these features, this board is an ideal choice for saving microcontroller pins, and expanding the number of input-output lines. EXPAND click board is designed to use a 3.3V power supply in the default position. For use with 5V systems, solder the PWR SEL SMD jumper to 5V position.

Note: For using I2C instead of SPI, check out the Expand 2 click using the MCP23S17 IC.

MIKROE-951

$19.15

Fan Click Board

NEW

Fan Click Board

A new accessory board for controlling 4-wire fans

MIKROE-2004

$16.98