100-pin MCU Card with PIC24FJ128GA010
100-pin LV24-33 MCU Cards provide easy connection to the development system through four 2x10 male connectors. The bottom layer of these cards is provided with a ground plane for noise prevention.
AnyNet 2G Click Board
The AnyNet 2G Click Board™ is a cellular to AWS gateway device, which provides developers with the complete solution for various IoT applications, by using the AWS IoT and Cloud Storage services for the data storage, analyzing and processing.
This Click Board™ provides an easy and secure connection with the AWS over the air (OTA), by utilizing the equipped Quectel M95 module and Eseye ES4623 embedded SIM card, that can work with more than 235 cellular operators from all over the world. AnyNet 2G Click Board™ can be used as an AWS IoT button with almost no configuration.
Note: Before the purchase of AnyNet 2G Click Board™, please contact Eseye and check for the coverage and support of embedded SIM cards from your local provider. Opening an AWS account and subscribing to Eseye marketplace is mandatory to work with this Click Board™.
AVRPLC16 v6 PLC System
The AVRPLC16 v6 PLC System is a full-featured development platform intended for developing and designing industrial, home or office control devices using Atmel AVR microcontroller.
This AVR based PLC system is controlled by ATMEGA32 microcontroller which is connected to 8 MHz oscillator and the rest of the board peripherals. The microcontroller can be replaced by any other AVR microcontroller with a similar pinout. The development system features numerous modules using different communication modules, such as RS-485, RS-232, Ethernet, etc. Along with them, it also has ADC module, RTC module, and MMC/SD connector.
The AVRPLC16 v6 PLC System comes equipped with an on-board USB 2.0 AVR programmer that has been specifically designed for In-Circuit Serial Programming (ICSP). This development board also supports Telit GSM/GPRS modules: GM862-GPS, GM862-QUAD-PY, and GM862-QUAD. The AVRPLC16 v6 PLC System is connected to Ethernet via on-board ENC28J60 to provide network connectivity. The board even has mounting ports for antenna cables and screw terminals for adding a speaker and a microphone. It features 8 opto-inputs and 16 relays (for currents up to 16A).
£150.00 (save 6%)
Now easily connect your prototype or development board to oscilloscope or other monitoring devices using the EasyTEST Board. It acts as a complete and cost-effective solution to deal with your connection problems. The simple adapter board has 10 port pins, labelled D0-D7, VCC, and GND. It splits a male 2x5-pin header into two 2x5-pin headers connected in parallel, with the same pinout as the original system.
£4.80 (save 31%)
Ethernet Roll Cable (Transparent)
Standard Ethernet cable with roll-patent mechanism. It's equipped with two RJ45 male cconnectors compatible with computers, routers, modems and mikroElektronika development boards. The Flat Cable is 1m meter long and has transparent insulation and connector plastics. Central plastic comes with red mikroE logo sticker.
£2.39 (save 52%)