The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.


Silent Step Click Board

Silent Step Click Board™



SIM Card Holder Board

Now easily connect your prototype board with SIM Card using the SIM Card Holder Board by MikroElektronika. This breakout board is designed for a standard 6-pin SIM card socket. When a SIM card is placed into the holder, the user can gain access to the six pins of the SIM card through the standard 0.1"(2.54mm) spaced 6-pin output of the board. Compatible with standard breadboards, the clear labelling on-board provides easy identification of each output pin. This compact, cost-effective board can be used for rapid prototyping and development.



Single Cell Click Board

Single Cell Click Board™



Skywire Click Board

The SkywireClick Board™ is an adapter Click Board™, which is capable of hosting NimbeLink/Skywirecellular modems (using stacking headers) to MikroElektronika development boards. It carries the MCP1826 low dropout regulator from Microchip. SkywireClick Board™ is designed to run either on 3.3V or 5V power supply. The Click Board™ communicates with the target MCU over UART interface, and the following MikroBUSpins: PWM, AN, INT, RST, CS.

NOTE: the SkywireModem is not included in this offer.



Slider 2 Click Board

The Slider 2 Click Board™ is a very accurate potentiometer Click Board™, featuring a high-quality mechanical slide-action potentiometer (slider), which in conjunction with the accurate voltage reference IC, provides very precise analog control voltage (CV) at its output. Featuring an accurate voltage reference IC, the output of the Click Board™ can be directly sampled by the A/D peripheral of the microcontroller (MCU). Since there are many different MCU architectures with different reference voltage requirements, Slider 2 Click Board™ offers a possibility to select the voltage reference between 4.096V and 2.048V, two most commonly used values for different MCU peripherals.



Slider Click Board

The Slider Click Board™ features a mechanical slide action potentiometer - a slider, which gives a nice feeling when actuating, along with 16 SMD LEDs, that can be used for any kind of visual feedback. The on-board high-resolution 22-bit ADC can detect even the smallest move, faithfully capturing the smoothness of the slider movement, while digitizing its position. The 16 on-board SMD LEDs can give a nice visual feedback of the slider position, but those LEDs can also be used for other purposes since they are not hardwired to the slider.

Slider Click Board™ can be used to control various digital applications with an accurate and comfortable slider potentiometer, while the LEDs can be used to display the desired information in a form of a bar or a position. For example, Slider Click Board™ can be used to control a quad digital potentiometer, such as the one that can be found on DIGIPOT 5 Click Board™, while displaying the position of the selected digital wiper on the LEDs.



SMA right angle female connector for PCB

SMA right angle female connector for PCB.



Smart Buck Click Board

The Smart Buck Click Board™ is the two-channel step-down DC/DC converter and regulator, with plenty of additional functions. It can provide voltage measurement at each of its two programmable voltage outputs, as well as the measurement of the current consumption. In addition, it can also provide power consumption measurements of the Click Board™ itself, both at the mikroBUS +5V power rail, and the external voltage input terminal. Finally, there is 2kbit of EEPROM at disposal, which can be used for logging the measurements, storage of the working parameters, or any other type of general purpose data.



Smart DOF Click Board

The SmartDOF Click Board™ features a highly advanced integrated system-in-package (SiP) solution with three different sensors on-chip: triaxial accelerometer, magnetometer, and triaxial gyroscope are all integrated on the same die, along with the powerful 32-bit ARM® Cortex®-M0+ MCU. Thanks to the integrated MCU, the BN080 SiP provides extensive signal processing. This allows many features to be implemented, including the MotionEngine™ support. The MotionEngine™ software allows extensive data modes and events detection. The BNO080 also supports the dynamic calibration of the sensors for temperature and aging, offering ultimate accuracy and reliability.




The SmartADAPT add-on board allows user to manually redirect signal sent from a pin on the development system to a pin of another additional board or device. This board is equipped with 160 male headers from 20'



SmartADAPT 2 Board

The SmartADAPT2 Board is an accessory board used to rearrange 16 I/O pins just by moving on-board jumpers in order to meet the specified needs. This board is ideal for configuring the prototype device I/O pins. This patch panel board is designed to be compatible with MikroElektronika's development systems and prototyping boards. The SmartADAPT2 Board comes with two 8-bit I/O ports to be reconfigured to aid attaching peripherals and other hardware. It has 32x16 header matrix with 16 jumpers that allow user to adjust desired input lines to appropriate output headers. The user is provided with on-board screw terminals that enable use of external power supply in place of using input headers. The output VCC pin can be configured using a jumper. The SmartADAPT2 Board supports use with 3.3V and 5V systems.




The SmartADAPT MINI Board allows user to manually redirect signal sent from a pin on the development system to a pin of another additional board or device. This board is equipped with 160 male headers from 16x10 header matrix and 8 jumpers that aid in adjusting the input lines. By routing the input lines to specific output headers, the user can form a new, desired pinout arrangement. The SmartADAPT MINI board features two output and two input IDC10 headers compatible with MikroElektronika development and accessory boards. The SmartADAPT MINI board is designed to operate using both 3.3V and 5V systems.

Note: Pins 9 and 10 are universally reserved for VCC and GND among all MikroElektronika systems, leaving only eight output pins to be configurable.