The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.


Thermocouple Type-K Glass Braid Insulated

Thermocouple Type-K Glass Braid Insulated.



Thermostat 2 Click Board

Thermostat 2 Click Board™



Thermostat 3 Click Board

Thermostat 3 Click Board™



Thermostat Click Board

The Thermostat Click Board™ is based on the Maxim MAX7502 IC digital temperature sensor. It also provides an over-temperature alarm/interrupt/shutdown output, and an SN74LVC1G126 single bus buffer from Texas Instruments. MAX7502 IC can measure temperatures from -25.



Thingstream Click Board

Thingstream Click Board™



Three-Axis Accelerometer Board

Now introduce static and dynamic acceleration measurement functionality to your project using the Three-Axis Accelerometer Board. This additional board comes with an integrated ADXL330 3-axis accelerometer IC with signal-conditioned voltage outputs. The ADXL330 module is capable of measuring static acceleration of gravity and can be used as a tilt sensor. It can also determine dynamic acceleration that occurs due to motion, shock or vibration. This 3-axis sensing module measures acceleration with a minimum full-scale range of 3 g.

The ADXL330 chip in the Three-Axis Accelerometer Board is an ideal choice for tilt-sensing applications, such as mobile devices, gaming systems, disk drive protection, image stabilization, sports and health devices, etc. The board is designed to use a 5V DC power supply voltage only. Offering exceptional performance and reliable operation, this accelerometer board offers analog voltage output. The mounting holes on each corner allows for simple integration.



Thumbstick Click Board

The Thumbstick Click Board™ is a quality input board that makes it easy for the users to add a high precision analog thumb joystick to their design. This Click Board™ features a MCP3204 12-bit A/D converter. It also has got a pushbutton enabled joystick with dual axis and spring return. This joystick is quite similar to the ones used on joypads on popular gaming consoles like PS2 and Xbox controllers. Thumbstick Click Board™ has typical life span of 100,000 cycles. With the help of two potentiometers connected to a stick, directional input gets received in the x and y axes of the joystick unit. An interrupt signal to the target board microcontroller is sent by the mechanical pushbutton. The MCP3204 12-bit A/D converter then converts the analog signal to digital. To output this digital signal to the target board, Thumbstick Click Board™ makes use of MikroBUS SPI (CS, SCK, MISO and MOSI) lines.

Thumbstick Click Board™ Input device is suitable for fine control of graphical user interfaces and remote control operated video games, since it facilitates 360 degree directional movement.



Thumbwheel Click Board

Thumbwheel Click Board™ is a mikroBUS add-on board with a 10-position rotary sprocket connected to a 1-Wire 8-Channel Addressable Switch.



Thunder Click Board

Add a lightning sensor to the design with the Thunder Click Board™. This add-on measurement board incorporates AS3935 Franklin lightning detector IC and MA5532 coil antenna.

For communication with the target board microcontroller, Thunder Click Board™ uses the MikroBUS SPI (MOSI, MISO, SCK, CS) and INT lines. The board is designed to use 3.3V or 5V power supply, selectable via SMD jumper.

Thunder Click Board™ is designed to detect the existence and proximity of potentially hazardous lightning activity within a 40km radius. Thunder Click Board™ is also capable of providing an estimation of the distance to the head of the storm from 40km away down to 1km in 14 steps, while rejecting disturbances from man-made signals, such as motors and microwave ovens. It can also provide information on the noise level, which makes it an ideal choice for weather stations, sports equipment, UPS, power line conditioners, smart grid systems, environmental monitoring systems, portable GPS, bike computers, etc.Thunder Click Board™ provides detection of both cloud-to-ground and cloud-to-cloud lightning activity within a 40km range.




Tilt 2 Click Board

Tilt 2 Click Board™ is a tilt sensor switch, which breaks the circuit when tilted to an angle of 45° or when shaken. It is a single-pole-double-throw type of switch (SPDT), which can be operated with up to 24V. The current through the switch should not exceed 25mA. The Click Board™ is equipped with the the RB-441-45, a 45° rolling ball sensor switch, which uses gold-plated terminals and a gold-plated ball, in order to minimize the contact resistance. The sensor switch is very durable, enclosed in a PBT plastic with very good electric insulation properties. It can be used in any application that relies on sensing a tilt of 45°.

Tilt 2 Click Board™ is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click Board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS socket.



Tilt Click Board

The Tilt Click Board™ from MikroE is a measurement Click Board™ that includes RPI-1035, a four-directional optical tilt sensor. This surface mount type optical sensor provides positional feedback by telling if the device is leaning left, right, forward or backward at a given moment. It also offers substantial benefits over mechanical or magnetic-based direction detector solutions, which also makes it an ideal solution for situations where the user only require direction detection, and not the highly precise positional measurements. Tilt Click Board™ communicates with the target board MCU through MikroBUS PWM and INT lines to get Vout1 and Vout2 outputs from the sensor. It also has two on-board LED signals that are responsible for visual feedback from the sensor. The Click Board™ uses either a 3.3V or 5V power supply.

It is ideal for remote controls or game controllers, as well as applications related to robotics, or rotating displays.



TILTnSHAKE Click Board

The MikroE TILT-n-SHAKE Click Board™ is a multifunctional add-on board that is designed to keep away people from tampering with your design. Featuring a combination of tilt AND shake functionalities, the TILT-n-SHAKE Click Board™ includes a MMA8491Q IC sensor that is used as a 3-axis, 45-degree tilt sensor and can also be configured as a 3-axis digital accelerometer. The user is required to keep the Enable pin (EN) pulled to logic level high to use it as an accelerometer.

Featuring a 14-bit digital output and 8g full-scale range, this MEMS chip has a 1 mg/LSB sensitivity, and a fast response time of around 700 microseconds. TILT-n-SHAKE Click Board™ communicates with the target board MCU through MikroBUS I2C interface, using SCL, SDA pins. As a tilt sensor, the MMA8491Q chip has three detection outputs, one for each axis: Xout, Yout and Zout. For specific applications you may need only one or two dimensions, not all three.

This Click Board™ is intended to use a 3.3V power supply. It is ideal for tamper detect and anti-theft detection systems.