The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the account menu. 

The Debug Store - The Electronic Engineers' Tool Store

Mikroelektronika d.o.o.

Mikroelektronika d.o.o.

MicroElektronika (mikroE) is a dynamic forward thinking embedded systems development tools company with its headquarters in Belgrade.

MikroElekronika (MikroE) has chosen the Debug Store in the UK as their dedicated distributor of development tools.

The company is unique by producing complete development tool suites; ranging from compilers, debuggers, development platforms and training materials for a wide range of microcontroller families including ARM Cortex, AVR, PIC, PIC32, dsPIC and FT90x architectures. Support is also directly available for a huge range of peripheral devices including displays, video cameras, temperature probes and multi-axis gyroscopes and accelerometers by the provision of low-cost Click Modules. Their objective is to make the transition for the developer to a new architecture as simple and efficient as possible. It achieves this by providing software library support and working examples for all supported interfaces and development systems.

MikroElektronika (mikroE) have been chosen as the development tool company of choice by many major semiconductor manufacturers as they appreciate the use of mikroE tools will speed up development of new projects. They are recognised third-party development partners of companies such as Atmel, Cypress, Microchip, STMicroelectronics, Texas Instruments and official consultants to others including NXP.


Timer Click Board

Timer Click Board™ is a mikroBUS add-on board with Maxim's DS1682 total elapsed time recorder. The main feature of the IC is its elapsed time counter (ETC) used in conjunction with the ALARM pin.



TMR Angle Click Board

TMR Angle Click Board™



Touch Key 4 Click Board

Touch Key 4 Click Board™ is a capacitive touch sensing Click Board™, with the advanced touch/proximity sensor IC. It has three independently configurable channels and can work in several operating modes, including multiple button pattern detection mode, combo mode, press and hold detection mode, power button mode, and more. Capacitive touch sensor inputs are protected from false detection, which can be caused by the noise and RF interferences, providing a very reliable touch sensing functionality. Electrostatic Discharge (ESD) protection up to 8kV ensures that no ESD failures will ever occur while interacting with the sensor surface.



Touch Panel

An Analog resistive touch panel for use with 2.8" displays.



TouchClamp Click Board

The TouchClamp Click Board™ is a MikroBUSadd-on board with NXP's MPR121 proximity capacitive touch sensor controller.

It has seven plated holes for clamps which can be used to connect any ,



TouchKey 2 Click Board

TouchKey 2 Click Board™ has four capacitive pads powered by Microchip's ATtiny817 which has an integrated touch QTouch' controller.

The Click Board™ is designed to run on a 3.3V power supply. The four LEDs on-board the Click Board™ indicate when the Key (Pad) is pressed. TouchKey 2 Click Board™ communicates with the target microcontroller over UART interface.



TouchKey 3 Click Board

There are many kinds of touch sensors on the market, but every one of them has some unique features that make it stand out from the crowd. The TouchKey 3 Click Board™ is equipped with seven advanced capacitive sensors, based on the proprietary QTouch™ technology. Besides quite a large number of QTouch™ capacitive sensor channels, TouchKey 3 Click Board™ also offers some additional features, such as the Adjacent Key Suppression (AKS™), a technology that ensures correct button press, even when the touch sensing pads are placed close to each other.



TouchKey Click Board

The TouchKey Click Board™ features four capacitive pads powered by the TTP224 touchpad detector IC. TTP224 chip comes with multiple operating modes that allow the user to configure how the buttons will work. The capacitive pads can be toggled even when placed under a layer of glass or paper. TouchKey Click outputs four interrupt signals: OUTA, OUTB, OUTC and OUTD in place of default MikroBUS RST, AN, PWM and INT pins, respectively. It features three on-board jumpers enable the user to configure several operating modes of the TTP224 IC, including fast mode or low power mode, direct or toggle mode, enable/disable multi-key input, and so on. TouchKey Click is designed to work on either 3.3V or 5V power supply.

It works as an ideal replacement for mechanical switches and buttons, and being capacitive, it can register inputs through paper or glass.



TouchPad Click Board

Introduce an input device to the prototype using the Touchpad Click Board™ from MikroE. With a small form factor, this Click Board™ acts as a minimalistic capacitive touch input device powered by Microchip.



TouchPanel Connector Board

The TouchPanel Connector Board is a prototyping tool that is used for connecting GLCD touch panel. The board is provided with a plastic touchscreen-cable clamp bar in order to easily secure a touchscreen ribbon cable. It provides a connector for easy interfacing to a 4-wire touchscreen flat ribbon cable for prototyping work. The touch screen ribbon cable clamp bar can be broken or damaged when removing the touch screen cable from the main board. This board also can be used as a great replacement if the touchscreen FFC clamp bar on the development system was roken or damaged.

It is designed for easy prototyping and suitable for use with solderless breadboards.

Note: The connection pads of the board are unpopulated in order to let the user decide on how to connect the board to the development system. It has male header pins for typical breadboard use.



TouchPanel Controller Board

Introduce touch panel input functionality to any MikroElektronika



TouchPanel Controller Proto

The TouchPanel Controller PROTO Board enables you to connect your prototype device to a Touch Panel. There is also a Touch Panel controller with a connector provided on the board.